Membrane Testing Equipment For Monitoring And Testing Available In USA
-
PremiumManufactured by PHILOS Co. Ltd.based in SOUTH KOREA
Achieving commercial excellence and working with stakeholders with new goods and services are MEMS' main objectives. MEMS also creates and supplies its customers with a ‘Evaluation System' to help them produce accurate data and evaluate the membrane's worth. For its clients, MEMS is confident in offering high quality membrane evaluation products for a wide array of products including flat ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen High Temperature Membrane No. 89 is a single-component, asphaltic mastic recommended as an impervious membrane under corrosion-resistant monolithic linings or acid-resistant brick masonry for the protection of metal or concrete substrates. Spray application with airless equipment results in a flexible coating resistant to acids, alkalies and salts associated with flue gas environments ...
-
Manufactured by Sterlitech Corporationbased in USA
Our stirred cells have a tangential flow design to increase membrane and sample ...
-
Manufactured by Sesco Systems Engineering & Sales Co. Inc.based in USA
This SES800 Scepter cross flow membrane micro-filtration system is used to separate suspended solids in a process stream, or it can also be used to concentrate fine colloidal suspensions. The SES800 Stainless steel Scepter membrane will separate particles as from 0.05 to 1 micron in size. Common recycling applications are fine carbon contamination in lubricating and insulating oils and ethylene ...
-
Manufactured by Porometer a Division of Aptco Technologies Nvbased in BELGIUM
The new High Throughput Gas Separation (HTGS) system is a device designed to run up to 16 different membrane-based separations of variable single and mixed gas feeds simultaneously. Up to 5 gases (O2, CO2, CH4, N2 and H2) can be mixed at a set flow. The on-line analysis option permits screening mixed gas selectivities, in comparison to single gas permeation ...
-
Manufactured by Cembranebased in DENMARK
Test module for fast and economic validation. If you wonder how many membranes are needed for your specific application, or how to clean and maintain a stable performance? The test module can be ordered separately or with matching steel frame and air-scouring system immediately ready to be taken into operation. The modules are also stackable similar to the commercial size ...
-
Manufactured by REB Research & Consultingbased in USA
Tublular Pd-25%Ag membranes 1/8" OD x .003" wall: plain, coated with Pd-grey, or coated with PdCu or PdAu. These are generally sold sealed at one end and brazed to a stainless steel stub at the other. Length=6"+1" stub, 7" total. Selectivity to hydrogen ...
-
Manufactured by EconoPure Water Systems, LLCbased in USA
The LFNano™ membrane system is a nanofiltration system providing osmotic water quality with a simple, unique system to mitigate the effects of membrane ...
-
Manufactured by REB Research & Consultingbased in USA
Used to extract water, CO2, and H2S from syngas, landfill gas, etc. while retaining hydrogen, methane, and CO. 1000 cm2 membrane module. For other sizes, ask. Good to 60 psig. See here for permeability information and suggested ...
-
Manufactured by Sterlitech Corporationbased in USA
The Sterlitech Forward Osmosis Membrane Test Skid is designed to evaluate the performance of Forward Osmosis membranes under varying conditions. This test skid offers experimental control by allowing adjustment of the flow parameters to accommodate a wide range of operating conditions and applications. This system has been specifically designed for use with Sterlitech Cells configured for ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
Peak Scientific’s Solaris XE nitrogen generator offers a reliable, compressor-free gas solution that can comfortably meet the demands of most mass spectrometers within Waters’ portfolio of instruments. Using our tried and tested membrane technology, Solaris XE can operate with varying flow rates (up to 35L/min of high purity nitrogen), purity (up to 99.5%) and outlet pressure can be ...
-
Manufactured by Jozzon Membrane Technology Co., Ltdbased in CHINA
Jozzon RO membrane elements-Brackish Water (BW) Series including high desalination and high flow are suitable for desalination of surface water, underground water and low-pollution water source with ...
-
Manufactured by Diva Envitec Pvt Ltdbased in INDIA
Dehydration of azeotropes is energy-intensive and also uses secondary entrainers. Pervaporation or vapour permeation easily, efficiently and economically dehydrates and breaks these azeotropes based on diffusivity and selectivity. This technology is getting accepted despite its higher capital cost. SOLVOSEP is used in chemical, petrochemical, Distillery, Aromatic and pharmaceutical industries ...
-
Manufactured by Apex Vacuum LLCbased in USA
Apex Mass Flow Meters for vacuum and non-vacuum applications combine flexibility with great accuracy. Flexibility to choose from a list of 98 or more on-board gases, to choose your input and output voltage and the ability to use RS232 communications. The ability to control up to 26 Apex devices through one RS232 port, provides your set-up the ultimate in ...
-
Manufactured by PS Prozesstechnik GmbHbased in SWITZERLAND
Example for our support for a large scale membrane plant realisation: recovery of methanol/water from an extraction solution by reverse ...
-
Manufactured by Hydranautics A Nitto Denko Companybased in USA
Hydranautics' membrane technology experience and innovation are at the core of every DairyUF membrane. Specifically designed for whey protein concentration, DairyUF membranes deliver exceptional performance and ...
-
Manufactured by Ampac USAbased in USA
The Ampac USA Brackish Water Reverse Osmosis 300 GPD Water Purification System is the result of 15 years experience with the needs and requirements of commercial pure water users. This includes restaurants, coffee shops, convenience stores, micro breweries, supermarket produce and food preparation operations, misting and humidification systems, and many other businesses that must have ...
-
Manufactured by A-membranesbased in BELGIUM
The proprietary technology of A-membranes is based on surface modifications of ceramic membranes. We can apply our surface modifications on commercially available ceramic ...
-
Manufactured by Sterlitech Corporationbased in USA
The unique design of the Sepa test skids allow flat sheet membranes to be quickly changed out, thus reducing time between trials. Skid systems are available in single or multiple cell configurations in both parallel and series modes. The skid system also displays and records the data collected by the integrated sensors in real-time. Collected data can be accessed and retrieved using USB or ...
-
Manufactured by A G Engineersbased in INDIA
We are offering our clients with RO membranes which are precision engineered keeping in mind the client’s requirements. These RO Membranes are provided to our clients in customized specifications at highly competitive ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you