Only show results available in Virginia? Ok

Mercury Monitoring Applications

  • Premium

    Direct determination of mercury content in ambient air

    Introduction Mercury, being widespread in environment, has toxic effect on a human organism even at a low concentration. Therefore, quantitativ e determination of mercury in vari ous environments is one of the most important environmental monitoring problems.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Determination of mercury in crude oil and oil products

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Mercury determination in natural gas

    Introduction The natural gas is a significant source of ingres s of mercury in the environment. The typical mercury concentration in natural gas may vary from 0.01 to 200 μ g/m3 . Mercury, being present in hydrocarbon gas, initiates corrosion of pipelines and catalyst poiso ning during gas transportation and processing, and these effects have serious implications for the gas-processing industry.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Determination of total mercury content in blood by cvaas

    INTRODUCTION Blood is one of the most complex substances for determination of the Hg content. At the same time, blood is the most important diagnostic medium used for monitoring the effect of Hg vapor on the human organism. In almost all the countries, personnel of mercury-involving production facilities are regularly examined for the Hg content in blood, which should not exceed 20–50 µg/l, whereas in the case of a person unexposed to mercury vapor the blood normally contains 1–3 µg/l of Hg.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Determination of a total mercury content in urine

    INTRODUCTION The main way of mercury removal from human body is it s urinary excretion, which is an important diagnostic medium for screening examination of population, risk group determination, and diagnostics and treatment of mercury poisoning.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    RAPID ANALYSIS OF TOTAL MERCURY IN WASTE WATERS AND PROCESS WATERS WITH ELEVATED MERCURY CONTENT USING DIRECT PYROLYSIS TECHNIQUE

    A conventional standard method of total mercury determination in water using atomic absorption spectrometry (AAS) involves preliminary sample digestion that takes from 30 minutes to 8 hours depending on the digestion conditions. The use of a mercury analyzer RA-915M/RA-915+ with Zeeman background correction in combination with PYRO-915+ pyrolysis attachment provides direct determination of mercury in process and waste waters contaminated with mercury without digestion or any other sample preparation stages. The...

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Direct atomic absorption mercury determination in oil and oil products

    Introduction Determination of mercury in oil and petroleum hydrocarbon is currently a vital probl em due to the fact that the regulations for the mercury content in emission s from thermal power plants are becoming ever more stringent, and mercury poisons catalysts used in oil re fining.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Mercury determination in natural, surface, sea, drinking, bottled, mineral, and waste water by cvaas

    Introduction Mercury determination in natural, drinking, and waste waters is one of the most popular analyses used for environment pollution and sanitary control. Background concentrations of mercury in natural water are within several ng/l. Maximum national permissible levels for mercury in water lie in the range of 0.16–6 µg/l. For example, the following limits for mercury in drinking water are set, µg/l: 0.5 – Japan, Russia; 1 – Argentina, Australia, Brazil, China, EC; 2...

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Determination of the total mercury in a filtrate of wash-off samples from contaminated surfaces

    INTRODUCTION Quantitative determination of the total mercury content in filtrates of wash-off samples from the surfaces of walls, floors, equipment, and other facilities of m anufacturing areas is an effective method for the occupational safety monitoring.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Monitoring of mercury in ambient air

    Mercury, being widespread in environment, has toxic effect on a human organism even at a low concentration. Therefore, quantitativ e determination of mercury in vari ous environments is one of the most important environmental monitoring problems. The use of a mercury analyzer RA-915M/RA-915+/RA- 915Light with Zeeman background correction provides di rect real-time continuous determination of mercury in air from 0.5 ng/m 3 within the overall possible range of me rcury concentration in ambient air.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Mercury analysis for wastewater

    By Analytik Jena AG based in Jena, GERMANY.

  • Premium

    Determination of the mercury concentration in naphtha

    Introduction The mercury concentration in crude oil and petroleum products can vary in a wide range of less than 0.1 ppb to dozens ppm. Direct mercury determination in crude oil and petroleum products at the range above 5 ppb is covered by ASTM D7622-10(2015) "Standard test method for total mercury in crude oil using combustion and direct cold vapor atomic absorption method with Zeeman background correction". Mercury determination in naphtha and light petroleum products (condensate, gasoline and diesel fuel) at a...

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Direct mercury determination in coal

    IntroductionMercury is one of the most toxic trace contaminant naturally occurring in the coals. During the coal combustion process at the coal-fired power plants mercury is released into the environment. To manage effectively the stack gas cleaning process, it is necessary to know the mercury content in the coal, and also in stack gas, liquid and solid wastes.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Monitoring of mercury in natural gas

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Direct AA Mercury determination in cosmetics

    INTRODUCTION High mercury concentration can be found in such cosmetic products as skin lightening soaps and creams, makeup cleansing products, and mascara. Mercury in cosmetics exists as inorganic and organic compounds. Inorganic mercury (e.g. ammoniated mercury) is used in skin lightening soaps and creams. Organic mercury compounds, such as thiomersal, are used as cosmetic preservatives in makeup cleansing products and mascara.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Direct atomic absorption mercury determination in tissues and biological samples

    INTRODUCTION Mercury and its compounds are highly toxic substances fo r humans. It occurs naturally and exists in various forms: elemental (or metallic); inorganic (e.g. mercuric chloride); and organic (e.g., methyl- and ethylmercury). These forms all have different toxicities and implications for health. Among naturally occurring mercury compounds, methylme rcury exerts a significant influence (neurotoxic action) on human health.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Mercury monitoring for measuring mercury speciation in air

    Tekran offers the only completely integrated, automated system for measuring mercury speciation in air. The Tekran 2537, when coupled to the Model 1130 and Model 1135 provides a continuous record of gaseous elemental mercury, gaseous oxidized mercury and particle-bound mercury. Over the past 12 years, the Tekran 2537-1130-1135 system has been the most significant tool used to advance the understanding of the fate and transport of atmospheric mercury. See the Expert’s Corner for details about international...

    By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).

  • Premium

    Continuous emissions monitoring for mercury monitoring

    Waste incinerators, cement plants and power plants need good and reliable measurements of total gaseous mercury. The measurement of total gaseous mercury is a challenge due to chemical reactions and contamination. The installed systems will often require a lot of maintanence still not giving reliable results.

    By Opsis AB based in Furulund, SWEDEN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you