mercury sampling trap Equipment available in Idaho

Available in Idaho| Near Idaho
40 Results found

We couldn't find any mercury sampling trap equipment in Idaho

Here is a list of results available in Idaho

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Mercury Monitoring ×

  • Keyword: mercury sampling trap ×

  • Available in: USA ×

  • Available in: Idaho ×

Environnement S.A. - Model Amesa-M - Sorbent Trap Mercury Monitoring (HG)

by Environnement S.A     based in Poissy, FRANCE

Continuous sampling of Mercury (Hg) in CEMS applications. Automatic and continuous stack mercury sampler. Measuring range (total mercury): 0.001 – 1000 μg/ m³. Meets the US EPA Performances Standard 12 B mentioned in the US Portland Cement Rules and the new MATS (Mercury and Air Toxics Standards).

Apex Instrument - Mercury Sorbent Traps

by Apex Instruments, Inc.     based in Fuquay-Varina, NORTH CAROLINA (USA)

PS 12B specifies sampling, and analytical, and quality-assurance criteria and procedures for the performance-based monitoring of vapor-phase mercury (Hg) emissions in combustion flue gas streams, using a sorbent trap monitoring system. The principle employed is continuous sampling using in-stack sorbent media coupled with analysis of the ...

Sorbent Trap - Quartz Sample Boat Ladle

by Aura Scientific, LLC     based in Apex, NORTH CAROLINA (USA)

Product Number: OL-001-A. Sorbent trap 10 mm quartz sample boat ladle. Use with Ohio Lumex® RP-M324 Sorbent Trap Mercury Analyzer.

MercSampler - Model XC-6000EPC-W - Automated Sorbent Trap Monitoring System

by Apex Instruments, Inc.     based in Fuquay-Varina, NORTH CAROLINA (USA)

The automated XC-6000 EPC MercSampler for Sorbent Trap Monitoring Systems is designed for continuous dual sampling of vapor-phase mercury emissions from stationary combustion sources, in accordance with the U.S. EPA MATS published in 40 CFR, Part 60-63, Appendix A, Subpart UUUUU and is MATS compliant. Performance Specification 12B: Specifications ...

Ohio Lumex - Model RP-M324 - Sorbent Trap Mercury Analyzer

by Ohio Lumex Co., Inc.     based in Twinsburg, OHIO (USA)

The RP-M324 attachment is designed to be part of a mercury analytical system (RA-915+ or RA-915M mercury analyzer) which altogether makes up the Sorbent Trap Mercury Analyzer. Thousands of RATA’s all over the USA and Canada have been completed using this system. Using a sample probe that will be inserted into the emission stack and a ...

Mercury UltraTracer - Model UT 3000 - Gaseous Detector

by Mercury Instruments USA     based in Littleton, COLORADO (USA)

Measurement of Total Gaseous Mercury in Air or Other Gases at Ultratrace Levels (ppq - parts per quadrillion). Atomic Absorption with Proprietary MI GoldTrap technology. Advanced AA photometer with stabilized Hg EDL lamp. Display of real-time signal reading. Display of results in bar graph. Data Logger. Exports data to PC. Optional Auto-Calibrate. ...

MercSampler - Model XC-30B - Automated Console, 110V with Laptop

by Apex Instruments, Inc.     based in Fuquay-Varina, NORTH CAROLINA (USA)

The XC-30B MercSampler Console, designed especially for performing Method 30B, simplifies sampling requirements by automating data acquisition, sample flow adjustments, leak checks, calculations, temperature control, and calibrations. Data is easily transferred to a Microsoft Windows Based PC through USB Interface. The XC-30B MercSampler performs ...

Apex Instruments - Model XC-260 - Manual Mercury Audit Source Sampler

by Apex Instruments, Inc.     based in Fuquay-Varina, NORTH CAROLINA (USA)

The XC-260 Hg Source Sampler is designed for performance testing, base line studies, and profiling.  This low-cost, portable, and field-proven audit system is easy to learn and use, and is ideal for sampling mercury emissions based on Reference Method 30B of the U.S. EPA Appendix K, 40 CFR, Part 60. The XC-260 Hg Audit System is used for ...

MercSampler - Model XC-6000EM - Automated Console for Paired Hg Sorbent Sampling

by Apex Instruments, Inc.     based in Fuquay-Varina, NORTH CAROLINA (USA)

XC-6000EM Automated Console for Paired Hg Sorbent Sampling. Features Proportional Valves w/Mass Flow Sensors, Pressure Transducers, DGMs w/Optical Encoders, Diaphragm Pumps. Ethernet/Modbus for DAS Interface and/or other Ethernet devices, USB Interface, 120VAC With Wired Router. (Laptop sold separately).

MercSampler - Model XC-6000EM-V - Automated Console for Paired Hg Sorbent Sampling

by Apex Instruments, Inc.     based in Fuquay-Varina, NORTH CAROLINA (USA)

XC-6000EM-V Automated for Paired Mercury (Hg) Sorbent Sampling. Proportional Valves w/Mass Flow Sensors, Pressure Transducers, DGMs w/Optical Encoders, Diaphragm Pumps. Ethernet/Modbus for DAS Interface and/or other Ethernet devices, USB Interface, 220VAC With Wired Router. (Laptop sold separately).

Ohio Lumex - Model OLM30B - Sorbent Trap Sampling System

by Ohio Lumex Co., Inc.     based in Twinsburg, OHIO (USA)

The systemis designed for portability and ease of use to perform short term RATA sampling, CEM performance certifications, diagnostic studies for mercury control technologies, and baseline testing.  This low cost, compact, and field-proven system is easy to learn and use. It is ideal for sampling mercury emissions based on EPA Reference ...

Model HGPA-8-HS - 8 Foot Air Cooled Mercury Probe

by Apex Instruments, Inc.     based in Fuquay-Varina, NORTH CAROLINA (USA)

Reliable and Easy To Use With Quick Set-Up Time. Cement MACT Compliant. 8 Foot Stainless Steel Dual Sorbent Trap Hg Probe, Air Cooled, Single Heater; 2' Tube Sheath; Two 10mm Fittings; Type K Stack, Trap & Probe Thermocouples; 1/2' Sample Lines; Insulated Junction Enclosure; 1000W/120V (blower sold separately).

Ohio Lumex - Model 30B - Vapor-Spiked Sorbent Traps for Total Mercury Testing

by Ohio Lumex Co., Inc.     based in Twinsburg, OHIO (USA)

Method 30B Sorbent Traps at a variety of spike levels are available for evaluations and RATA. These 10mm extra durable 2-section sorbent traps are typically used from a few hours to one day sampling and can be used when pulling up to 2 liters per minute flow. Custom spiking at any value you need is available.

Tekran - Model 2600-IVS - Automated Sample Analysis System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Series 2600 system allows the analysis of ultra-trace levels of total mercury in laboratory prepared environmental samples (water, biota, soil, sediments, gas cartridges, effluents and more). It offers unparalleled sensitivity and flexibility for those who require truly sensitive total mercury analysis.

Appendix - Model PS 12B/Appendix K RATA - Vapor-Spiked Sorbent Traps for Total Mercury Testing

by Ohio Lumex Co., Inc.     based in Twinsburg, OHIO (USA)

Appendix K/PS 12 B RATA Sorbent Traps at a variety of spike levels are available for evaluations and RATA. When performing a RATA on an Appendix K/PS 12 B System, these are the traps used in the Appendix K/PS 12 B System and are specially made to match the Method 30B traps perfectly. These 10mm extra durable 3 section sorbent traps are typically ...

Ohio Lumex - Model 30B - Unspiked Sorbent Traps for Total Mercury Testing

by Ohio Lumex Co., Inc.     based in Twinsburg, OHIO (USA)

Method 30B Sorbent Traps are available for evaluations and RATA. These 6mm or 10mm extra durable 2-section sorbent traps are typically used from a few hours to one day sampling and can be used when pulling up to 2 liters per minute flow. Method 30B is a procedure for measuring total vapor phase mercury (Hg) emissions from coal-fired combustion ...

Tekran - Model 3300Xi - Mercury Continuous Emission Monitor

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The EPA Electric Generating Unit Mercury and Air Toxics (EGU MATS) and Portland Cement Maximum Achievable Control Technology (PC MACT) regulations require reductions in gaseous mercury emissions. Tekran has proven technology to support mercury compliance monitoring, abatement system optimization, and performance audit testing instrumentation.

Ohio Lumex - Model PS 12B/Appendix K - Long Term Testing Spiked Sorbent Traps for Mercury Monitoring

by Ohio Lumex Co., Inc.     based in Twinsburg, OHIO (USA)

PS 12B/Appendix K Long Term Testing Spiked Sorbent Traps at a variety of spike levels are available for Long Term and Continuous testing. These 10mm extra durable 3 section sorbent traps are typically used from a 1-7+ day sampling and can be used when pulling up to 1 liter per minute flow. They are all custom spiked for extra spike retention at ...

Ohio Lumex - Model PS 12B/Appendix K - Long Term Testing Unspiked Sorbent Traps for Mercury Monitoring

by Ohio Lumex Co., Inc.     based in Twinsburg, OHIO (USA)

PS 12B/Appendix K Long Term Testing Unspiked Sorbent Traps are available for research purposes and to perform baseline evaluations. These 10mm extra durable 2 or 3 section sorbent traps are typically used from a 1-7+ day sampling and can be used when pulling up to 1 liter per minute flow. Most customers will order these first to determine their ...

Model HGK-PFI - Mercury System

by Environmental Supply Company, Inc.     based in Durham, NORTH CAROLINA (USA)

The HGK-PFI turnkey system in a NEMA cabinet is a fully automated platform integrated system for CEM applications in industries needing proven reliability in sorbent trap monitoring of flue gas Mercury on a permanent basis. (click on images to enlarge)

Related Terms for mercury sampling trap

Need help finding the right suppliers?

Let the XPRTs do the work for you