wind direction sensor Equipment available in Estonia

Available in Estonia| Near Estonia
219 Results found

We couldn't find any wind direction sensor equipment in Estonia

Here is a list of results available in Estonia

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Meteorological Monitoring ×

  • Keyword: wind direction sensor ×

  • Available in: Europe ×

  • Available in: Estonia ×

Met One 024A - Wind direction sensor

by Stevens Water Monitoring Systems, Inc.     based in Portland, OREGON (USA)

The Met One 024A wind direction sensor provides azimuth data for use in micrometeorological measurements related to operational studies and research. This sensor is especially useful when a low starting threshold, a high damping ratio or a short delay distance is required. (For example, in making Paquill determinations or for use with sigma ...

R.M. Young 5103 - Wind Speed & Direction Sensor

by Stevens Water Monitoring Systems, Inc.     based in Portland, OREGON (USA)

The 05103 Wind Monitor is a high performance wind sensor. Rugged, corrosion-resistant construction makes it ideal for a wide range of wind measuring applications. The wind speed sensor is a four blade helicoid propeller. Propeller rotation produces an AC sine wave voltage signal with frequency directly proportional to wind speed. Slip rings and ...

Met One 034B - Wind speed/direction sensor

by Stevens Water Monitoring Systems, Inc.     based in Portland, OREGON (USA)

The Met One 034B wind speed and direction sensor combines both wind measurements into a single sensing unit. The unit installs in minutes and will provide accurate, long term, continuous monitoring in hostile environments.

Met One 50.5 - Ultrasonic Wind Speed/Direction Sensor

by Stevens Water Monitoring Systems, Inc.     based in Portland, OREGON (USA)

The 50.5 Solid State Wind Sensor is a continuation of the development work started with NOAA on sonic wind sensors over 25 years ago. This sensor design contains the same wind distortion algorithm and factoring that has been proven and accepted in applications around the world.

Climatronics - Model Wind Mark III - Wind Sensors

by Climatronics Corporation     based in Bohemia, NEW YORK (USA)

Climatronics' Wind Mark III (WM-III) Wind Sensors combine accuracy and reliability with low cost. They also meet the Environmental Protection Agency (EPA) Prevention of Significant Deterioration (PSD) requirements and are well suited for general wind monitoring applications. The WM-III sensor is also available as a wind speed only (P/N 100108-1) ...

Jinyang - Model JY-WD160C - Wind Direction Sensor

by Jinyang Industrial Co., Ltd.     based in Gyeonggi, SOUTH KOREA

The sensor is designed to operate properly under any weather conditions. The sensor consists of the counter-balanced, light wind vane and highly accurate, low threshold gray code encoder. The wind direction is measured in the built-in Micro-processor and measured value is output in terms of the digital.

Wind Sensors: Wind direction sensors

by LSI-LASTEM srl     based in Settala Premenugo, ITALY

The gonioanemometer is a wind direction sensor. In the C100D and C500D the measuring system is a potentiometer, in the C600D models it is digital encoder. In the C600D models the processor calculates the trigonometric progressive average on a programmable acquisitions number, this leaves out the inevitable displacement wave of the vane aboveall at ...

Model PM1S AND PM1D - Wind Speed and Wind Direction Sensors

by WindKinetic S.r.l.     based in Sesto Fiorentino, ITALY

PM1S and PM1D sensors give you a reliable accuracy of the wind measurement which is sufficient when planning an investment in a micro or small wind system. They are the ideal data transmitters for simple requirement, especially where economical solutions are requested. They are fully compatible with the wind loggers manufactured by ...

200-WS-04 WeatherPort Wind Direction Sensors

by NovaLynx Corporation     based in Grass Valley, CALIFORNIA (USA)

This series of WeatherPort Wind Sensors are moderately priced quality transducers designed for general application. A combination of injection molded thermoplastic, anodized aluminum, and stainless steel parts contribute to reliable operation in adverse environments.

Climatronics - Model WE-14 - Wind Resource Anemometer

by Climatronics Corporation     based in Bohemia, NEW YORK (USA)

Climatronics’ WE-14 anemometer (P/N 102836) is specifically designed for measuring the wind speed at potential wind power generating facilities. This anemometer is an ideal direct replacement for the disposable plastic sensors used historically for wind resource assessment.

Model OMC 160 - Wind Speed & Direction Sensor

by Observator Instruments BV     based in Ridderkerk, NETHERLANDS

The popular and often used wind sensor OMC-160 is a combined wind speed and direction sensor, based on the cup and vane principle. Having chosen for the highest quality stainless steel materials and internal non-contact measuring devices, this sensor stands for a long life time, having the highest accuracies within both the low range as well as ...

Climatronics - Model WE-24 - Wind Resource Vane

by Climatronics Corporation     based in Bohemia, NEW YORK (USA)

Climalronics' WE-24 wind direclion sensor (P/N 102837) is the companion to our WE-14 wind speed resource anemometer.

WeatherLog - Model Aervane - Wind Speed and Direction Sensor

by RainWise Inc.     based in Trenton, MAINE (USA)

The WeatherLog AerVane was designed to meet or exceed the EPA guidelines for regulatory modeling applications.

911-UWS - Ultrasonic Wind Direction Sensor

by MTECH Systems Pty Ltd     based in Braeside, AUSTRALIA

The 911-UWS delivers a state-of-the-art solution for reliable, accurate and cost-effective wind speed and directional measurement in a single non-mechanical device. The elimination of moving parts from the sensor, together with a rugged stainless steel construction, means that 911-UWS is virtually maintenance free and requires no calibration on ...

RainWise - Model WSR/WDV - Multi-Vane Wind Speed and Direction Sensor

by RainWise Inc.     based in Trenton, MAINE (USA)

The RainWise multivane wind speed and wind direction sensor consists of a multi-vane rotor and wind direction vane mounted on a anodized aluminum support tube.

Wind Direction Sensor 3590/3590 EX D300-January 2008 (Averaging)

by Aanderaa Data Instruments AS - a Xylem brand     based in Bergen, NORWAY

A sensor for measuring average wind direction in a sampling interval. It is designed to be used with Aanderaa Sensor Scanning Units, Dataloggers or Display units.

Climatronics - Motor Aspirated Radiation Shields

by Climatronics Corporation     based in Bohemia, NEW YORK (USA)

Climatronics Motor-Aspirated Solar Radiation Shield, Motor TS-10 (P/N 100325), utilizes a triple-shield design and fan to provide the constant mass flow rate past the sensor(s) necessary to yield accurate temperature values. This shield is superior to a naturally aspirated shield, which relies on the wind conditions for sensor ventilation. ...

Model Sonic-SDI - Ultrasonic Wind Sensor

by RainWise Inc.     based in Trenton, MAINE (USA)

Configured to work with a SDI-12 data logger. The Sonic-SDI sensors are mounted on a 310mm/16mm diameter aluminum post with a mounting bracket and supplied with an 82ft (25m) length cable.

Model CV7-E - High Speed Ultrasonic Sensor

by RainWise Inc.     based in Trenton, MAINE (USA)

The unique CV7 family of high precision sensors are available in many output configurations. The High Speed models CV7-E & CV7-EL come standard with the Serial RS422/RS232 bus using the well-known NMEA 0183 output protocol.

WindSonic - Model USWSC - Lightweight Ultrasonic Wind Sensor

by RainWise Inc.     based in Trenton, MAINE (USA)

A lightweight ultrasonic wind sensor, WindSonic is of a robust, high strength construction designed to withstand installation and use with no fear of the damage commonly experienced with the more fragile cups, vanes or propellers. Windsonic does not require expensive on-site calibration or maintenance, and with a corrosion free exterior, WindSonic ...

Need help finding the right suppliers?

Let the XPRTs do the work for you