Only show results available in Michigan? Ok

Microbial Air Sampling equipment for Monitoring and Testing

  • Premium

    Model MAS-100 Iso MH - Air Sampler

    The MAS-100 Iso MH is designed for monitoring microbiological contamination of the air in isolators. A unique safety concept permits the installation of various sampling heads for standard 90-100 mm Petri dishes at the critical control points while all electronic and moving parts remain outside the critical zone. The MAS-100 Iso MH has an ...

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Premium

    BioCapt - Microbial Impactor

    The BioCapt® Microbial Impactor enables the capture of microbiologically viable particulates on a suitable media surface for later incubation and enumeration. With precision-cut slits to ensure laminar flow, the BioCapt Viable Microbial Impactor maximizes collection efficiencies for viable particles in accordance with ISO 14698-1. The 25 L/min ...

    By Particle Measuring Systems based in Boulder, COLORADO (USA). from Microbial Impactor Product line

  • Premium

    MiniCapt - Remote Microbial Air Sampler

    Ideally suited for aseptic environments, the MiniCapt® Remote Microbial Air Sampler simplifies the job of microbial air sampling by applying modern data management capabilities that save time and reduce operator error in air sampling data. The MiniCapt Viable Microbial Sampler uses a unique HEPA-filtered exhaust so it doesn’t contaminate ...

    By Particle Measuring Systems based in Boulder, COLORADO (USA). from Remote Microbial Air Sampler Product line

  • Premium

    Remote Sampling ISP Kit

    When remote and flexible monitoring with no fixed sampling point is needed, the Remote Sampling Isokinetic Sampling Probe (ISP) Kit a I lows for samples to be taken while maintaining the integrity of the measurement. The ISP Kit uses a length of sample tubing to connect the sample point to the impaction plate, and is ideal for minienvironment ...

    By Particle Measuring Systems based in Boulder, COLORADO (USA). from Remote Sampling ISP Kit Product line

  • Premium

    SurCapt - Microbial Surface Detection Kit

    The SurCapt™ Microbial Surface Detection Kit is an all-inclusive, ready-to-use kit which simplifies and quickens the process of environmental surface testing for biological contamination. The kit uses GreenLight® Technology for the rapid detection of microbial activity on cleanroom surfaces and the ...

    By Particle Measuring Systems based in Boulder, COLORADO (USA). from Microbial Surface Detection Kit Product line

  • Premium

    MiniCapt - Mobile Microbial Air Sampler

    The MiniCapt® Mobile Microbial Air Sampler is an innovative, light and mobile air sampler. It simplifies the job of microbial air sampling by applying modern data management capabilities that save time and reduce operator error in air sampling data. The MiniCapt Mobile Air Sampler makes the job easier by incorporating a capacitive and sliding ...

    By Particle Measuring Systems based in Boulder, COLORADO (USA). from Mobile Microbial Air Sampler Product line

  • Premium

    Remote Isolator Kit

    When remote and flexible monitoring with no fixed sampling point is needed, the Remote Isolator Kit allows for samples to be taken at a distance while maintaining the integrity of the measurement. The Kit uses a remote sample head where the measurement is taken in-situ and the control of the MiniCapt® instrument is performed outside the ...

    By Particle Measuring Systems based in Boulder, COLORADO (USA). from Remote Isolator Kit Product line

  • Premium

    MiniCapt - Compressed Gas Kit

    The MiniCapt® Compressed Gas kit allows the MiniCapt Mobile Microbial Sampler to perform microbiological monitoring of compressed gases. The compressed gas kit is designed to work with either the 25 LPM, 50 LPM, or 100 LPM MiniCapt systems.

    By Particle Measuring Systems based in Boulder, COLORADO (USA). from Compressed Gas Kit Product line

  • Premium

    BioCapt - Single-Use Microbial Impactor

    The BioCapt® Single-Use Microbial Impactor helps minimize false positives for microbial activity in pharmaceutical cleanrooms by reducing contamination from handling of agar plates. This results in a decrease in investigations while increasing productivity. Additionally, many costly and time consuming sterilization steps, such as autoclaving, ...

    By Particle Measuring Systems based in Boulder, COLORADO (USA). from Single-Use Microbial Impactor Product line

  • Model HPD 50/100 LPM - Microbial High Pressure Diffuser

    Unique compressed air/gas sampling device, which allows for attachment and sampling of a compressed air/gas system with the use of a unique autoclavable high pressure diffuser, with filtered exhaust. The diffuser works in conjunction with EMTEK’s RCG Compressed Air/Gas Sampler, or P100 Portable Microbial Air Sampler, and laser particle ...

    By Emtek, LLC based in Longmont, COLORADO (USA).

  • Climet - Model CI-90 & CI-90+ - Airborne Microbial Sampler

    Aseptic environments used in the manufacture of sterile products must be monitored in accordance with regulatory standards.  The CI-90 uses the highly effective and time proven active impaction method.  This collects air through a perforated head, and microorganisms are impacted onto a standard 90 mm petri dish placed into the ...

    By Climet Instruments Company based in Redlands, CALIFORNIA (USA). from Airborne Microbial Sampler Product line

  • Emtek - Model P100 - Portable Air Sampler

    The P100 Microbial Air Sampler offers two CPU controlled sampling rates, 28.3 LPM (1 CFM), and 100 LPM, to allow for continuous monitoring of critical processes, or to take quick cubic meter “grab samples”. The sampled air volume is HEPA filtered prior to being exhausted at the unit, or remotely through optional attachments. The unit ...

    By Emtek, LLC based in Longmont, COLORADO (USA).

  • Hyrbrid - Microbial & Total Airborne Particulate Diffuser

    EMTEK to learn about our new High Pressure Diffuser (HPD) for sampling of compressed Air/Gas Systems for Microbial Contaminants with our P100, or V100/RCG Microbial Air Samplers and/or Total Particulates via Laser Particle Counter.  The new HPD is Electropolished 316SS & allows for HEPA filtration of the exhausted volume.  The unit ...

    By Emtek, LLC based in Longmont, COLORADO (USA).

  • Tisch - Model TE-10-800 Series - Ambient Air Viable (Microbial) Cascade Sampler Impactor

    x Stage Ambient Viable Sampler. System includes Six Aluminum Orifice Stages, Silicone O-ring Gaskets, Vacuum Pump Assembly and Carrying Case complete Single stage viable impactor operating at 28.3 LPM (Same as two stage).

  • MicroBio - Model MB2-RSH - Isolator Microbial Air Sampler

    The MicroBio MB2-RSH isolator microbial air sampler has a host of features making it ideal for use in sealed compartments, research, clean rooms, pharmaceutical validation and throughout hospitals. Capable of using both 90 mm Petri dishes or 55 mm contact plates, readily available at low cost with a variety of media makes the MicroBio a very ...

    By Cantium Scientific Limited based in Dartford, UNITED KINGDOM.

  • Emtek - Model R2S - Remote Slit Sampler

    The R2S Microbial Air Sampler incoporates industry standard Slit-to-Agar methodology with comparable microbial recovery/sensitivity, offering a highly accurate analysis of air quality. The R2S is designed for monitoring clean rooms, LAF Hoods and Isolators, but can be employed for monitoring in virtually any critical environment. It is designed to ...

    By Emtek, LLC based in Longmont, COLORADO (USA).

  • SAS Super Isolator

    Isolator Cabinet Monitoring - Filling Line MonitoringSAS Isolator SamplingThe SAS Super Isolator is a specific development of the hand held air sampler units aimed at Isolator cabinet monitoring and filling line monitoring.The SAS Super Isolator features a stainless steel sampling head which is located permanently inside the isolator cabinet. The ...

    By Cherwell Laboratories based in Bicester, UNITED KINGDOM. from SAS Super Isolator Product line

  • Emtek - Model V100 - Controller

    The Versatile 100 (V100), a new addition to the EMTEK line in 2010, oflersa high level of versatility in microbial air sampling capabilities.

    By Emtek, LLC based in Longmont, COLORADO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you