Microbiology Monitoring Applications available in Ukraine
-
Premium
Monitors, gas analyzers solutions for ISO 22716 solutions for cosmetics & personal care
Providing you with a complete spectrum of contamination monitoring solutions. The Cosmetics and Personal Care manufacturing industry is required to meet ISO 22716:2007 and worldwide GMP Standards for hygienic production and contamination control. This includes monitoring viable and non viable contamination that could impact the safety and quality of your products. Particle Measuring Systems brings in-depth knowledge of manufacturing processes and regulatory codes, such as ISO 22716, to Cosmetics and Personal Care ...
By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA).
-
Premium
Monitors, gas analyzers solutions for food and beverage safety sector
Providing you with a complete environmental monitoring solution. In this new era of smarter food safety, regional and local food and beverage manufacturing GMP regulations can be an asset to your business and products. Trust your contamination control monitoring and prevention to Particle Measuring Systems. We have been successfully controlling microbial and particulate contamination in critical regulated manufacturing environments worldwide for over 45 ...
By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA).
-
Automated microbiological monitoring solutions for institutions / remote locations industry
It is vital for all campuses and institutions to ensure their water supply is flowing clean, safe and pure. When the health and safety of guests, visitors or residents is at risk, every second counts. An E. coli infection at a campus, waterpark, stadium, hospital or any institution where tens, hundreds or even thousands visit is devastating. However, regular proactive testing with the TECTA™ B16 could prevent an outbreak before it ...
By TECTA Pathogen Detection Systems, Inc. (TECTA-PDS) based in Kingston, ONTARIO (CANADA).
-
Microbial Analysis for Waste Water Industry
In our laboratory, we perform a wide range of microbiological analyses using a number of technologies. We equip end customers or other laboratories with all the necessary devices and knowledge to perform analyses. ...
By Microbium d.o.o. based in Ljubljana-Dobrunje, SLOVENIA.
-
Maldi MSI in Microbiology
MALDI imaging of microbial colonies on agar media is a growing application for mass spectrometry imaging; however, matrix deposition on agar is often complicated. Typically, matrix is applied to wet agar using a fine sieve to dust matrix powder over the top of the slide, which often yields low to medium signal intensity and poor reproducibility. Using the HTX TM-Sprayer to deposit matrix on microbial colonies prior to mass spectrometry imaging allows for easier and more reproducible matrix ...
By HTX Technologies, LLC based in Chapel Hill,, NORTH CAROLINA (USA).
-
Masticator Machine, IUL`s Laboratory Blender for Profound Homogenization
IUL’ laboratory blender, known as Masticator, carries out a profound homogenization which makes it possible to obtain a sample perfectly representative of the food, drug, cosmetic, or any kind of material that has to be ...
By IUL S.A. based in Barcelona, SPAIN.
-
Microbial Analysis for Drinking Water Industry
In our laboratory, we perform a wide range of microbiological analyses using a number of technologies. We equip end customers or other laboratories with all the necessary devices and knowledge to perform analyses. ...
By Microbium d.o.o. based in Ljubljana-Dobrunje, SLOVENIA.
-
Microbial Analysis for Industry Process Sector
In our laboratory, we perform a wide range of microbiological analyses using a number of technologies. We equip end customers or other laboratories with all the necessary devices and knowledge to perform analyses. ...
By Microbium d.o.o. based in Ljubljana-Dobrunje, SLOVENIA.
-
Automated microbiological monitoring solutions for municipalities sector
E. coli outbreaks are on the rise, which means municipalities are becoming increasingly aware of how important it is to ensure the safety of their water supply. When the safety of the population is at risk, every second counts and regular, proactive testing with the TECTA™ B16 can help prevent an outbreak before it ...
By TECTA Pathogen Detection Systems, Inc. (TECTA-PDS) based in Kingston, ONTARIO (CANADA).
-
Automated microbiological monitoring solutions for recreational water industry
The number of people contracting E. coli from recreational bathing water is on the rise. When regularly testing water quality you want to be certain you get the results back quickly, accurately and efficiently. The longer it takes to get the result means either contamination or closed facilities; neither of these options is good for ...
By TECTA Pathogen Detection Systems, Inc. (TECTA-PDS) based in Kingston, ONTARIO (CANADA).
-
Automated microbiological monitoring solutions for irrigation industry
For farmers and growers, crop irrigation is a vital part of their farming practices. But what do you do if the water that is bringing life is also carrying E. coli? It has long been known that E. coli can travel for hundreds of miles through soil and wind erosion and the pathogen can be transferred to crops through irrigation practices. Farmers need a new method of detecting E. coli before it is too late. With the Food Safety Modernization Act (FSMA), critical point testing and fast, accurate reporting will soon ...
By TECTA Pathogen Detection Systems, Inc. (TECTA-PDS) based in Kingston, ONTARIO (CANADA).
-
Automated microbiological monitoring solutions for food and beverage industry
Even with advances in farming, distribution, processing and storage practices, E. coli outbreaks continue to occur throughout the food chain. In fact, increasingly stronger and more virulent strains of pathogens have become a worrying trend facing the Food and Beverage industry. What the industry needs is a method of detecting E. coli before it reaches the consumer. With the Food Safety Modernization Act (FSMA), critical point testing and fast , accurate reporting will soon be a ...
By TECTA Pathogen Detection Systems, Inc. (TECTA-PDS) based in Kingston, ONTARIO (CANADA).
-
Automated microbiological monitoring solutions for military / disaster relief industry
We call on our military personnel to defend our country; therefore it is vital that we do our best to keep them healthy. Anywhere military personnel are stationed they deserve the best training, equipment and care available. In both permanent and temporary accommodations, safe drinking and bathing water is high on the priority list. If an E. coli outbreak occurs, the safety of our military men and women and the safety of our country could be compromised. Regular, proactive testing with the TECTA™ B16 could ...
By TECTA Pathogen Detection Systems, Inc. (TECTA-PDS) based in Kingston, ONTARIO (CANADA).
-
Microbial Analysis for Technical Water Sector
In our laboratory, we perform a wide range of microbiological analyses using a number of technologies. We equip end customers or other laboratories with all the necessary devices and knowledge to perform analyses. ...
By Microbium d.o.o. based in Ljubljana-Dobrunje, SLOVENIA.
-
Laboratory Mixer for Sampling
Sampling for microbiological analysis purposes is challenging mainly for two factors: i) it should be carried out under sterile conditions and ii) the food, drug or cosmetic sample to be analyzed needs to be representative. To achieve both points and a good extraction of the possible pathogen to be detected is usually performed by applying mechanical forces and working with a laboratory mixer, because we can get a representative sample and, at the same time, prevent the development of possible ...
By IUL S.A. based in Barcelona, SPAIN.
-
Rqmicro Products for Service Laboratories
rqmicro products are designed to increase the productivity and performance levels of service laboratories worldwide. Our products help tackle the microbiological analyses of standard and particularly complex samples while saving time and costs. The rqmicro product range is constantly growing, providing solutions for various types of microbiological ...
By rqmicro AG based in Schlieren, SWITZERLAND.
-
Hydronix Sensors for Measuring Moisture in Grain, Nuts and Pulses
Controlling moisture in grain, nuts and pulses throughout different stages of processing can be one of the biggest problems for manufacturers. All sorts of factors will affect the moisture level in the raw product; how it is stored, humidity in the atmosphere, the variety of the grain and also its particle size. All of these will have a contributing factor in the amount of moisture that either needs to be added or evaporated during processing. Hydronix sensors successfully measure moisture in all types of grain, ...
By Hydronix based in Normandy, UNITED KINGDOM.
-
Cooling & Drinkingwater: ATP monitoring of biomass growth in waters
Monitoring Biomass in (Cooling Tower) Waters through ATP monitoring The TOXcontrol can be used for ATP monitoring. Currently our company is doing research for further developments for this application on the TOXcontrol. Monitoring the microbial population of cooling towers is necessary in order to maintain the proper operation of the system. Conventional methods for monitoring microbial populations work by culturing microorganisms, a time-consuming procedure that requires days or even weeks of incubation before ...
By microLAN B.V. - Aqualabo Group based in Waalwijk, NETHERLANDS.
-
Filtration for Water Testing
Chemical purity of water is assessed for a wide variety of different chemicals depending on the type of water and applicable local legislation. Chemical analysis of water can include testing for nitrogen compounds, dissolved heavy metals, and total and dissolved organic carbon. Common water monitoring applications include: Determination of suspended solids in waterusing for example glass fiber filters. Chemical analyses of for example heavy metals, dissolved organic carbons (DOC), and ions. Microbiological ...
By Cytiva based in Marlborough, MASSACHUSETTS (USA).
-
Bioscience technology for Paints & Varnishes industry
c-square technology is also suitable for discontinuous production processes. To this end, we offer modular solutions that are suitable for ongoing monitoring of the microbial load situation throughout the entire manufacturing process. This includes the receipt of raw materials, the automated monitoring of the storage tanks for plastic dispersions, for example, and the outgoing goods inspection. We also support producers of biocide-free or low-biocide coatings, which have to monitor the microbial load situation ...
By c-square bioscience GmbH based in Tulln an der Donau, AUSTRIA.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you