Microsyringes | Environmental XPRT

Articles & Whitepapers

Troubleshooting injection volume variation in the Concurrent Solvent Recondensation – Large Volume Sample Injection Technique

I’ve started receiving a number of questions about the large volume injection technique called Concurrent Solvent Recondensation – Large Volume Sample Injection. Most recently, a question came through the Tech Service group about injection volume variation. I had encountered a similar problem when working on the 50 µL injection for the combined 1,4-Dioxane and Nitrosamines ...

Micro‐Volume Injection System for ICP‐MS

The MVX‐7100 L Workstation when paired with a DS‐5 total consumption nebulizer creates a paradigm shift in ICP‐MS sample introduction. It is a long overdue tool ...

COD analyzer for laboratories

LAR`s QuickCODlab is a chemical-free working COD analyzer for the determination of the chemical oxygen demand (COD) in water. Due to an innovative injection and oxidation technique, unfiltered water samples incl. particulates will be injected dire

Showcase

Automated Sample Prep Station

The APS-1650 Automated Preparation Station prepares off-line sample dilutions with specific intentions for use in the oil analysis industry. Before wear metals samples can be analyzed, they must be prepared by means of a relatively simple dilution (usually by a factor of ten). However, these dilutions are time consuming and carry the potential for human error. The APS 1650 Automated Preparation ...