mold analysis (Mold Testing - Monitoring and Testing) ...

Microbiology

AIHA Accredited for Mold and Fungi Analysis. Identification of Viable Mold, Fungi and Bacteria. Analysis of Fungal Spores in Air. Indoor Air ...

By STAT Analysis Corporation based in Chicago, ILLINOIS (USA). from Analytical Capabilities Service line

Mold testing protocol, media selection and laboratory analysis utilized are project dependant. Mold testing involving air samples, bulk materials analysis, culturette swab, tape lift, vacuum and inner-wall mold testing may be submitted for non-viable or viable mold analysis. ...

By ENView Inspections Protocols & Solutions based in Fairfax, VIRGINIA (USA).

Tabular Direct Exam

Analysis includes a determination of whether spores present are indicative of mold growth or simply a mix of spores coming in from the outside (normal fallout). If mold growth is present, analysis includes identification and a qualitative assessment of the amounts ...

By MoldReport based in San Bruno, CALIFORNIA (USA).

Direct Microscopic Exam (Qualitative)

Analysis includes a determination of whether spores present are indicative of mold growth or simply a mix of spores coming in from the outside (normal fallout). If mold growth is present, analysis includes identification to genus or group and a qualitative assessment of the amounts present. A general assessment of ...

By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from Mold Testing: Surface Samples Service line

MBL Services

tests for mold and bacteria analysis that cost less are good enough and the results are easy to interpret. Provides prompt, accurate mold and bacteria testing. We understand delayed decisions while you await laboratory results cost money. Provides you with data interpretation (if required) and relevant ...

By Mold & Bacteria Consulting Laboratories (MBL) Inc. based in Mississauga, ONTARIO (CANADA).

Mold Testing

Equipment necessary to collect air, wipe, bulk and water samples for mold and/or bacteria analysis Report which summarizes and provides interpretation of all measured microbiological concentrations Recommendations of appropriate remedial actions as well as personnel certified to perform remediation References ...

By Environmental Testing & Consulting of the Americas, Inc. based in Memphis, TENNESSEE (USA).

Microbiology Services

Non-Culture Based Methods: Spore trap analysis to identify and quantify airborne mold. Detailed spore trap analysis to identify and quantify mold, pollen, debris, fibers, skin. Tape Lift samples. Swab samples. Bulk samples. ...

By QuanTEM Laboratories based in Oklahoma City, OKLAHOMA (USA). from Lab Services Service line

Mold Remediation

in depth mold sampling and analysis, both air and bulk, viable and non-viable, and speciation upon ...

By Probe Environmental Inc. based in Ann Arbor, MICHIGAN (USA).

Laboratory Analysis Services

Under the direction of Dr. Boni Passmore, RC Analytical provides laboratory analysis of mold and sewage related bacteria samples. Our services include the analysis of both culturable and non-culturable samples. Our in-house services allow us to process samples rapidly when time is of the ...

By Restcon Environmental based in Sacramento, CALIFORNIA (USA).

Types of Mold And Bacteria Testing

Mold testing services include analysis of non-viable air samples (Air-O-Cell, VersaTrap, Micro 5, cyclex D, LARO-100, pcm cassettes), viable air samples (RCS, Andersen, etc), direct microscopic and culture analyses of bulk samples (drywall, wallpaper, pieces of carpets, insulation material, dust, wood and ...

By Mold & Bacteria Consulting Laboratories (MBL) Inc. based in Mississauga, ONTARIO (CANADA).

Environmental Services

Full Service Organic, Inorganic, Microbiology and Asbestos Laboratory. IEPA/NELAP Accredited for Environmental Analysis. NVLAP/AIHA Accredited for Air and Bulk Asbestos Analysis by PCM, PLM and TEM. AIHA Accredited for PCM, Lead/Metals and Organic Analysis. AIHA Accredited for Mold and Fungi Analysis. Turn ...

By STAT Analysis Corporation based in Chicago, ILLINOIS (USA). from Analytical Capabilities Service line

Mold Testing

Culture (viable) analysis. This includes enumeration of the colony forming units (CFU) and identification of molds to genus or species. Samples may include RCS, Andersen, LARO-100, or any other media suitable for culture analysis. The report includes a list of recovered molds and their concentration as colony ...

By Mold & Bacteria Consulting Laboratories (MBL) Inc. based in Mississauga, ONTARIO (CANADA).

Insurance & Litigation Experts for Mold and Water Damage

testing and to document the current conditions in a building. Our team provides you with data analysis, mold remediation protocols, project monitoring, clearance testing and expert testimony. IET personnel play key roles in the development of industry standards for both water damage restoration and mold ...

By Indoor Environmental Technologies (IET) based in Clearwater, FLORIDA (USA).

Research and Development Services

simulation software CAE to carry out cast liquid metal solidification ...

By Xuancheng Chieftech Metal Technology Co., Ltd. based in Xuancheng City, CHINA.

Services

As the greatest efficiency in handling your needs is our mission, VAER s.r.l. faces the market not as a simple supplier of molds or related products, but as a real business partner. We assist the client during the whole process, starting from an initial idea to the serial production of single items, by speeding ...

By Vaer s.r.l based in San Martino in Rio (RE), ITALY.

CAD Design Services

We believe high quality molds or plastic parts start with a great mold design.so we pay special attention to plastic mold construction, gates, runners, cooling channels and mechanisms to ensure the best solution are used. We work with customer closely to determine details such as mold steel, mold ...

By Aco Mold Manufacturing based in Shenzhen, CHINA.

Testing Services

If you request we can run a variety of tests to assess the level of contamination. Based on the problem and location we might use a tape test, swab or air sampling test. Each will help to determine the level of contamination, type of mold and varying counts by area. We compare this analysis against the outside ...

By American Mold Experts based in Plainfield, INDIANA (USA).

PCR Test: Single Fungal Species

PCR lab analysis includes detection and quantification of one selected indoor mold by mold-specific quantitative PCR (MSQPCR). Applied methodology has been developed by and is licensed through the EPA. Any PCR assay can be added to the aforementioned panels and custom panels can be created by request. Available ...

By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from PCR Testing Service line

3-Media Fungi Surface Culture (Incl. Asp. Spp.)

Analysis includes identification to genus (species for Aspergillus) of all fungi present and quantification to cfu/unit. Multiple dilutions and media types are ...

By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from Mold Testing: Surface Samples Service line

3-Media Fungi Surface Culture Full (Pen&Clad Genus)

Analysis includes identification to genus for Cladosporium and Penicillium, and identification to species for all other fungal colonies; quantification to cfu/unit. Multiple dilutions and media types are ...

By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from Mold Testing: Surface Samples Service line

Subscribe to our eBulletins