Monitoring Electrodes Applications

4 Results found
Only show results in Virginia?
OK
  • Category: Monitoring & Testing ×

  • Subcategory: Monitoring Electrodes ×

Measurement solution for HF emissions from brickworks

by Protea Limited     based in Middlewich, UNITED KINGDOM

Brick kilns, as well as other plants such as ceramics manufacturers and fertiliser producers, are a major producer of hydrogen fluoride (HF) emissions. HF is highly reactive gas and seriously damaging to human health, so has strict emissions limits imposed by legislation. In addition to the effects to humans, emissions have been found to damage crops and fruit trees, as well as the general environment. The brick industry strives to reduce the amount of HF emissions and numerous projects have been carried out into the research and development of proposed process modifications that introduce ways to reduce hydrogen fluoride emissions via the latest technology such as filters and scrubbers.

Oxidation Reduction Potential (ORP)/Redox

by Myron L Company     based in Carlsbad, CALIFORNIA (USA)

Oxidation Reduction Potential or Redox is the activity or strength of oxidizers and reducers in relation to their concentration. Oxidizers accept electrons, reducers lose electrons. Examples of oxidizers are: chlorine, hydrogen peroxide, bromine, ozone, and chlorine dioxide. Examples of reducers are sodium sulfite, sodium bisulfate and hydrogen sulfide. Like acidity and alkalinity, the increase of one is at the expense of the other.

Laboratory Analytical - pH-Measurement Application

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

The right System for the right Application. By choosing the right electrode, instrument and accessories customers can build a dedicated system for their application. A system capable of giving accurate and repeatable results time after time.

Fountain Solutions

by Myron L Company     based in Carlsbad, CALIFORNIA (USA)

Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately wetted.

Need help finding the right suppliers?

Let the XPRTs do the work for you