Monitoring Instruments Applications

26 Results found
Only show results available in Virginia?
OK
  • Category: Monitoring & Testing ×

  • Subcategory: Monitoring Instruments ×

Air quality monitoring for regulatory purposes

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

Air quality monitoring for regulatory purposes requires instrumentation, systems and procedures that meet international standards such as those described by the USEPA, MCERTS or the European Union. Ecotech offers solutions that meet this criteria.

Meteorological monitoring

by Casella     based in Kempston, UNITED KINGDOM

A range of traditional manually read instrumentation for the measurement of surface meteorological parameters.

Gas monitoring instruments and systems for titanium dioxide

by Gasmet Technologies Oy     based in Helsinki, FINLAND

Titanium dioxide is the most important white pigment used in the polymer industry. It is widely used, because it efficiently scatters visible light, thereby imparting whiteness, brightness, and opacity when incorporated into a plastic product.

Gas monitoring instruments and systems for print factories

by Gasmet Technologies Oy     based in Helsinki, FINLAND

Typical modern printing processes utilize solvent-based dyes. The evaporation of the dye solvents into the ambient air during the printing process may expose the workers to various chemicals. Depending on the type of solvents in case, the solvents have different long term exposure limits, which should be obeyed. Component specific measurements are necessary to protect the workers from exposure while avoiding unnecessary interruptions to the printing process from false alarms.

Mass flow devices for analytical instrumentation

by Axetris Ag     based in Kaegiswil, SWITZERLAND

Axetris mass flow devices are used in a variety of analytical applications: Gas Chromatography, Mass Spectrometry, Atomic Spectroscopy, Elemental Analysis, Thermal Analysis, Bioreactor and Fermentor.

Low level measurement of aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring.

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The Series 8900 BTEX Analyzer with a high-sensitivity PID provides direct low level measurement of Benzene, Toluene, Ethylbenzene, and Xylene`s in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites.

Biomass Plant Emissions Monitoring (CEMS)

by Procal - Parker Hannifin Corp     based in Peterborough, UNITED KINGDOM

Procal´s analysers are used extensively in reporting and control applications in modern Biomass plants. The flexible and reliable instruments form the heart of the systems, enabling CO, NO2, NO, SO2, H2O, CO2, O2, dust and velocity to be measured.

Noise Monitoring

by Cirrus Environmental     based in Peterborough, UNITED KINGDOM

Airport noise monitoring often requires a combination of short term measurements to gather information along with long term measurements to maintain compliance with agreed noise levels. Cirrus Environmental has a range of noise measurement instruments that have been purpose designed for these tasks along with the NoiseHub software package.

Flow Measurement instrumentation for mass flow measurement & control flow solutions

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

We manufacture a variety of mass flow technologies for precision measurement of gases, liquids, and steam.

Radiation monitoring instruments for the Nuclear power industry

by Technical Associates     based in Canoga Park, CALIFORNIA (USA)

Air-stack-liquid effluent for PWR and BWR Nuclear Power Plants.

Gas monitoring instruments and systems for greenhouse gas emissions from soil

by Gasmet Technologies Oy     based in Helsinki, FINLAND

Measurement of greenhouse gases released from soil and water surface forms an important part of climate change study. Microbial activity in the soil or for instance the melting of permafrost releases greenhouse gases such as Methane and nitrous oxide N2O into the atmosphere. Measurement of the concentration for these gases inside an open-bottom soil chamber placed on the soil over time tells the emission rate (flux) per chamber footprint area.

Measurement solution for ambient air workplace monitoring

by Protea Limited     based in Middlewich, UNITED KINGDOM

Protea can supply fixed workplace monitoring systems that can measure single or multi-points about the workplace. Specifically designed analytical systems can ensure detection limits down to ppb levels can be achieved for multiple gases with a single instrument. Controlling software can run automatically, providing instantaneous or time-weighted average readings.

Water quality monitoring systems for wastewater & effluents monitoring industry

by SWAN Analytische Instrumente AG     based in Hinwil, SWITZERLAND

Instruments for monitoring the aeration-process, nitrification and de-nitrification; chlorination and de-chlorination; as well as the final discharge into the environment.

Measurement of methyl bromide in ambient air for monitoring workplace exposure limits in fumigation facilities

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The Series 8900 Methyl Bromide Monitoring System provides an automated, direct measurement of Methyl Bromide in ambient air. This instrument can meet and exceed the requirements for ambient methyl bromide monitoring. It is utilized in fumigation facilities and industrial plants to detect potential worker exposure to methyl bromide, resulting from mechanical failure, human error or product off gassing. Multipoint sampling options allow the analyzer to monitor multiple sample locations for greater coverage.

Measurement of diacetyl in ambient air to monitor workplace exposure limits.

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The Series 8900 Diacetyl Analyzer provides direct measurement of Diacetyl in ambient air. This instrument is utilized for environmental monitoring and to monitor workplace exposure limits. The Series 8900 Analyzer for Diacetyl employs a photoionization detector (PID) as the sensing element. A dual column configuration with timed backflush to vent is used to strip off moisture and heavier hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed volume of sample is carried to the pre-cut column. Backflush is timed so that only the Diacetyl and other similar components are eluted to the analytical column. Contaminants on the pre-cut column are backflushed to vent. The Diacetyl is separated from potentially interfering components on the analytical column and elute to the detector for analysis.

Application package continous casting powder 'ready to go'

by Fluxana GmbH Co. KG     based in Bedburg-Hau, GERMANY

This application package is a 'ready to go' calibration kit for xrf instruments. Together with the company Stollberg, FLUXANA has developed a fused bead method for the product control of continuous casting (CC) powders. The general idea was a universal program which covers a wide product range and that is also able to control the used raw materials. The result was two different application packages each with a set of standards and a set of control samples. - Calibration set continuous casting powders prepared from CRM as glass beads - Calibration set raw materials prepared from CRM as glass beads - Calibration work performed by FLUXANA expert 2 days on site - 2x drift monitors for xrf instrument - 2x control samples for validation each 10g powder for preparation on site - Flux FX-X100 FLUXANA application packages include always the sample preparation method. All packages are running in our application laboratory. You are always free to send your samples for testing free of charge.

Need help finding the right suppliers?

Let the XPRTs do the work for you