Only show results in Massachusetts? Ok

Near Infrared (NIR) Analyses services for Monitoring and Testing

  • Premium

    Steel & Metal Solutions

    Enable cutting-edge technology, ease-of-use, and dependability via our non-contact temperature sensors and solutions. Increasing quality standards and higher energy costs demand more accurate and consistent temperature control in steel and metal making processes. With more than 50 years of experience in temperature measurement using light-based technologies, Advanced Energy's extensive selection ...

    By Advanced Energy based in Milpitas, CALIFORNIA (USA). from Thermal Processing Solutions Service line

  • Premium

    In-Furnace Thermal Glass Surveys

    In-Furnace Thermal Glass Surveys provide essential insights into the thermal processes within glass melt tanks, with accurate, real-time measurements to increase efficiency, productivity, and asset life in glass production. ...

    By AMETEK Land based in Dronfield, UNITED KINGDOM.

  • Service & Repairs

    Factory Trained Service Team: The SEAL Analytical Technical Team includes fully-trained in-house Service Engineers with years of discrete and flow analyzer experience. On-site and Factory-returned Service: SEAL offers both on-site and factory-returned Service and Repair of the following SEAL, formally Bran+Luebbe and Technicon instruments: AQ2 Series Discrete Analyzer, AQUA Series Discrete ...

    By SEAL Analytical, Inc. based in Mequon, WISCONSIN (USA).

  • System Integration Services

    The reliability of Monitoring Systems (CEMS, WQMS, AQMS and process analysers) is function of a high number of parameters commencing with the selection of the measurement technology or the sampling method in regards to the application requirements. At AquaGas we are committed to assist you along this selection process, always aiming to provide you with innovative and cost effective integrated ...

    By AquaGas Pty Ltd based in CURRUMBIN, AUSTRALIA. from Engineering Services Service line

  • Pressure Calibration Services

    Our UKAS pressure calibration laboratory is equipped with a range of precision pressure balances, dead weight testers, digital calibrators and digital barometers enabling the company to offer pneumatic, gas, hydraulic and oxygen clean pressure gauge calibration. Our UKAS accredited pressure range covers both absolute and gauge measurement from -0.9 to 35 bar for pneumatic gauge pressure, up to ...

    By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Calibration Services - Traceable and UKAS Accredited Service line

  • Medical Calibration Services

    A team of experienced calibration and test engineers with a vast knowledge of laboratory electronic and biomedical equipment compliments the extensive hi-tech laboratories at Young Calibration. The calibration laboratory utilises the latest technological and methodical procedures covering an extensive range of EBME calibration services, available throughout the ...

    By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Calibration Services - Traceable and UKAS Accredited Service line

  • Data Recording and Processing Services

    The simultaneous acquisition of large quantities of data is essential in order to gain an understanding of noise and vibration phenomena. These data are then checked and analysed using various methods to find appropriate solutions for the problem at hand. Multi-channel data acquisition systems, which are highly valued by industrial and environmental professionals, are used in a wide range of ...

    By ACOEM based in Limonest, FRANCE.

  • Applied Ecological Services (AES) Services

    Applied Ecological Services (AES) of Brodhead, WI and Ayres Associates of Eau Claire, WI, have jointly announced the addition of new services for aerial imaging and remote sensing available through the purchase and co-ownership of a Leica RCD30 aerial camera. The medium format digital system will provide color and near-infrared (NIR) imagery to support a wide variety of projects, from engineering ...

    By Applied Ecological Services, Inc. (AES) based in Brodhead, WISCONSIN (USA).

  • Our Services

    The founders of NiRACLE believe Process Analytical Technology (PAT) and Quality by Design (QbD) represent the future of the pharmaceutical industry. As a knowledge-based company, NiRACLE will serve clients in these areas. As implied by its name and logo, NiRACLE is specialized in Near Infrared (NIR) technologies including the conventional NIR and NIR chemical imaging. NiRACLE is also specialized ...

    By Niracle, LLC. based in Newtown, PENNSYLVANIA (USA).

  • Infrared Spectroscopy Analysis Service

    Feasibility studies for qualitative or/and quantitative purposes.Development and validation of methods.Construction, maintenance, exploitation and updating of databases.Parameter prediction on unknown samples following our models.Construction and maintenance of network of spectrometers.Transfer of calibration models between instruments from the same spectrometer model or from different ...

    By Belgis Biotech Laboratories based in Gembloux, BELGIUM.

  • Infrared Technology Serivce

    Infrared cameras are primarily applied in the measurement of solid body temperatures (e.g. material bed, burning bed and slag). Solid state temperature is derived from radiation intensity in the range of 3.8 – 4.0 µm with IR cameras, which were optimised for thermal combustion processes. In this range, the hot combustion gases and flames are mostly transparent. With these IR cameras, ...

    By ci-Tec GmbH based in Karlsruhe, GERMANY.

  • Innovation Services

    The most modern technology for best possible results; Since 2004 the WAE has the to date most modern processing plant for substitute fuels (RDF). A near infrared reflector (NIR) is being used for the selective separation of plastics. The result is a particularly thorough separation of the waste and thus a significant improvement in the recyclable proportion and in the quality of the. The plant at ...

    By Wertstoffaufbereitung GmbH Edersleben based in Edersleben, GERMANY.

  • Technical Control Services

    The laboratory is competent to carry out mechanical and technological tests in accordance with the applicable standards SIST, EN, DIN, ISO and ASTM. Mechanical tests, in most cases supplemented by chemical and metallographical investigation, completes the knowledge of the properties of metallic ...

    By ACRONI based in Jesenice, SLOVENIA.

  • Research and Development Services

    Eshet Eilon’s R&D department constantly works on new developments, in the forefront of packhouse technologies, and cooperates with leading scientists, including of the Volcani Institute. The company’s leading technology is the NIR system (Near InfraRed). NIR systems use special wave length that can penetrate into the internal part of the product and analyze its chemical properties ...

    By Eshet Eilon Industries Ltd. based in Western Galilee, ISRAEL.

  • Process & Environment - Flow

    Mass flow meter/controller,Probe, NIR,Probe, Raman,Pump, gear,Pump, peristaltic,Pump, piston,Sensor, in-line, BOD/COD,Sensor, in-line, pH,Sensor, in-line, surface tension,Sensor, in-line, TOC,Sensor, in-line, ...

    By Achema Pte Ltd based in Singapore, SINGAPORE.

  • Gas Cylinder Disposal Services

    Compressed gases are a unique hazard. Depending upon the particular gas within a cylinder, there is potential for flammability, combustibility, corrosivity, toxicity or air reactivity. Yet, over 90% of unknown gases can be identified on your premises. Through our unique, industry leading, turn-key services, HazChem identifies, processes and disposes all of your unknown gas cylinders safely and ...

    By HazChem Environmental Corporation based in Addison, ILLINOIS (USA).

  • Reporting Services

    CT Laboratories is a strong proponent of electronic data deliverables (EDDs) to reduce the time required to provide our clients with their data, while providing great flexibility in how the data are used. We are also capable of electronically providing laboratory data to third parties, such as regulatory agencies, at the client’s ...

    By CT Laboratories based in Baraboo, WISCONSIN (USA).

  • Mobile Laboratory Services

    LEGEND"s St. Paul, MN laboratory offers portable lab services to support the individual site specific analytical needs of brownfield redevelopment, construction project, long-term site investigation, and remediation projects. The use of real-time analyses conducted within the mobile lab allows the contractor to quickly characterize the materials in question giving clients the opportunity to ...

    By Legend Technical Services, Inc. based in Phoenix, ARIZONA (USA).

  • Chemicals - Incident Response

    DirectCIH performs data gathering, analysis, and control determinations on-site for situations where rapid information is needed. We use state-of-the-art, real time, on-site sampling and analytical technologies. Very low levels of multiple chemical compounds, both organic and inorganic, can be identified by field IR and GC-MS ...

    By DirectCIH based in Pell City, ALABAMA (USA). from Incident Response Service line

  • CEDA - Chemical Cleaning Services

    CEDA was one of the first companies in the world to provide chemical cleaning services to industrial facilities. Chemical cleaning is the roots of CEDA; it’s where we got started as an organization and how we’ve built our footprint. With four decades of experience behind us, our team has the knowledge to tackle any chemical cleaning challenges. ...

    By CEDA International Corporation (CEDA) based in Calgary, ALBERTA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you