Only show results in Virginia? Ok

Non-Destructive Testing (NDT) Applications

  • Premium

    Online monitoring solutions for the food & beverage industries

    Several on-line monitoring technologies such as non-destructive types have become increasingly important due to the increasing automation and the incorporation of new and more efficient processes in the food industry. Food quality and safety of food are the main points of interest. AppliTek builds and supplies the necessary analytical tools that will allow for a high throughput and a short response time to increase process efficiency and reduce waste, with seamless integration in the existing infrastructure.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Industrial solutions for the carbon dioxide (CO2) lasers

    Carbon Dioxide (CO2) lasers are high power lasers, usually used for cutting of ferrous and non-ferrous metals. High-performance gas flow control is a key requirement for achieving high cutting performance with CO2 lasers. Gas flow control plays an important role for mixing key gases at a number of locations with a CO2 laser: Beam Generation: The gas mixture used as the emitting medium usually consists of CO2, He and N2. Most laser manufacturers specify a minimum required purity for the beam generation gas mixture, which is typically > 99.99%. A highly-accurate gas mixing control is therefore necessary, either for production of pre-mixed gas cylinders, or for in-situ mixing within the laser unit.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Premium

    TPH in Soil Remediation

    InfraCal TOG/TPH Analyzers allow for TPH (Total Petroleum Hydrocarbons) in soil testing at remediation sites such as leaking underground storage tanks and produced water evaporation ponds. Site managers can avoid having costly soil remediation equipment sit idle while waiting for off-site lab results. Sampling requires a few simple steps that can be performed by non-technical personnel. The soil is mixed with the extraction solvent, shaken, filtered, and then presented to the InfraCal Analyzer for measurement. Features include: - Results in under 15 minutes, including extraction ¨ Detect levels as low as 10 ppm ¨ Portable, rugged, lightweight, easy-to-use ¨ Battery operable ¨ Ideal for field or laboratory applications ¨ Factory calibration available

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Visual inspection solutions for the boroscope and video boroscope for remote visual inspections

    Boroscopes (aka Borescopes)are useful and valuable tools in any industry where remote visual inspections are important. Traditional, non-video techniques for tracking an object, do not work as well within the environment a boroscope typically encounters. Using these devices you can get clear visual access to many hard-to-reach places without a complete tear-down of the components. There are two main types of boroscopes - rigid and flexible. You can get flexible boroscopes with 2 way and 4 way tip articulation, as well as devices without tip articulation.

    By Medit Inc. based in Winnipeg, MANITOBA (CANADA).

  • Premium

    Assessing underground infrastructure for roads & bridges industry

    The United States has the largest road, highway, and bridge network in the world. It includes approximately 4 million miles of state and local roads, 136,000 miles of federal highways & 604,000 bridges. These networks are vital to the nation’s economy due to the ability to freely move people, goods and services. Most road and bridge networks have exceeded their useful lives and need to be rehabbed or replaced. There is an overwhelming need to find and repair deficient roads and bridges to ensure America keeps moving. Having a non-destructive means of inspecting road and bridge assets will give owners a cost-effective means of prioritizing repairs. EnTech makes sure your road and bridge networks are sustainable.

    By EnTech Engineering Company based in Saint Louis, MISSOURI (USA).

  • Hydrographic Surveying

    Key to any Hydrographic survey is tidal data and Valeport offer tide gauge options for both shore based and offshore / seabed applications together with telemetry packages for secure data transfer. 

    Echo sounders, both single and multi-beam need sound velocity data to correctly produce depth measurements.  Valeport offer the largest range in sound velocity sensors and profilers that have world beating accuracy.

    If simple, small boat echo sounding is required with single or dual frequency transducers and interface of external parameters with GPS reference then we have just what you need in our portable Midas Surveyor single beam echo sounder.

    By Valeport Ltd based in Totnes, UNITED KINGDOM.

  • Construction Xray Inspection

    A non destructive test for concrete plays a central role in determining the quality of cement casting. Bubbles and sediment in the cement weaken the construction considerably. NDT testing equipment is also used in construction to determine the quality of the wired foundations. One of the challenges of construction NDT is the possible difficulty in reaching testing locations. A non destructive test for concrete conducted with a portable digital radiography system provides an excellent inspection tool. Combining mobility with phenomenal penetration capabilities and the highest quality digital radiology imaging, Our portable X-ray inspection systems provide a comprehensive solution to construction NDT technicians.

    By Geomorph Instruments based in Piraeus, GREECE.

  • Integrated real-time gas analysis solution for specialty gases industry

    CIC Photonics’ extensive experience with gas analysis has also included what the industry refers to as Specialty Gases, as distinguished from Semi Gases, Electronic Specialty Gases, and Industrial Gases. Specialty Gases are high purity gases used across many applications by researchers, by government agencies, and by commercial businesses. Included among these users and applications are: hospitals for medical gases; environmental labs and testing companies for blends of protocol gas mixtures; calibration gases; spectroscopy standards; gas composition measurements and confirmations; and others.

    By CIC Photonics, Inc. based in Albuquerque, NEW MEXICO (USA).

  • Patented Innovative Monitoring Technology for Bridges Industry

    SoundPrint is a patented innovative monitoring technology that can detect and locate failures in high-strength steel wire, strand or cable through continuous, non-intrusive remote monitoring.

    By Pure Technologies - a Xylem brand based in Calgary, ALBERTA (CANADA).

  • Quantitative Agricultural Analyses

    ASD’s NIR measurement solutions are ideal for the qualitative and quantitative agricultural analysis necessary throughout the entire production process, including process monitoring of fermentable sugars and enzymatic activities for increased product yield. The ability to analyze large numbers of samples simultaneously in real-time, continuously, and non-destructively, provides significant advantages in the manufacturing stage. The flexibility of ASD systems allows this at virtually any point in the processing stream where determining constituent or final product quality is critical to the success of your operation.

    By ASD Inc., a PANalytical Company based in Boulder, COLORADO (USA).

  • Powerline - Commline Inspection

    Radiographic NDT testing of a power line is no simple matter. The power line`s electric cables need to be inspected for wear and tear as a routine procedure. Elevating the radiographic NDT equipment to the necessary heights presents a serious problem. Our digital portable radiography systems combine high mobility with cutting edge X-ray technology. Highest quality images are created upon request and are immediately available on screen for analysis. The excellent resolution and dynamic range combined with advanced but user-friendly software are the key to the comprehensive field radiographic NDT solution that we offer.

    By Geomorph Instruments based in Piraeus, GREECE.

  • Agriculture Analyses and Soil Analyses

    From assessing soil fertility to crop nutrients analysis, ASD Inc. has the expertise in agriculture and soil analysis to ensure your success. Researchers rely on ASD spectrometers and spectroradiometers because they are portable, provide non-destructive measurement, and offer rapid results.

    By ASD Inc., a PANalytical Company based in Boulder, COLORADO (USA).

  • Laboratory equipments for pore throat distribution & wettability

    Having obtained a Pc curve, pore throat distributions can now be calculated using the Washburn equations. The imbibition and secondary drainage curves generated by the NMR Pc measurement also allow USBM wettability to be predicted. Both of these calculations are integrated into the software, and follow as a natural consequence of the NMR Pc data. A further added advantage is that the NMR measurement is non-destructive and can use reservoir fluids and reservoir wettability.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Patented Innovative Monitoring Technology for Buildings & Structures Industry

    SoundPrint is a patented innovative monitoring technology that can detect and locate failures in high-strength steel wire, strand, or cable through continuous, non-intrusive remote monitoring.

    By Pure Technologies - a Xylem brand based in Calgary, ALBERTA (CANADA).

  • Combined photo-radiometric probe for Museum & Metal Industry

    The combined photo-radiometric probe LP471P-A measures the two parameters of principal interest in the field of lighting, namely the ILLUMINATION (lux) and UVA IRRADIANCE (W/m2). The probe is composed by a luxmeter and an UVA radiometer. The signals of the two sensors are read and processed at the same time to visualize the relation between the two quantities expressed in µW/lumen. The two sensors are equipped with a diffuser for the correct measure according to the cosine law. The probe LP471P-A is particularly useful when the simultaneous measurement of illuminance and UVA irradiance is required. For example, in museum environment when it is necessary to evaluate the UVA radiation level in the lamps in order to avoid damage to paintings or wood or any other historical art objects(CIE 157) and another area of interest is the Non Destructive Testing (NDT) that employ penetrating liquids, used primarily in the fields of mechanics and aerospace(ISO 3059:2001)

    By Delta OHM S.r.L. based in Caselle di Selvazzano, ITALY.

  • NDT Inspections for Petroleum Retail

    Safety and cost are two of the biggest concerns in industry today. At Inspectahire we realise this and aim to minimise the effect of them both. We do this by using the latest inspection technology which can either be operated remotely or if the requirements allow, by man.

    By Inspectahire Instrument Company Ltd. based in Aberdeen, UNITED KINGDOM.

  • StructureScan

    Cutting and coring experts and construction professionals require a reliable, non-destructive means to locate targets within concrete structures prior to drilling, cutting or coring. The industry’s widest range of concrete inspection antennas ensures that StructureScan is optimized for one`s particular application. StructureScan is the tool of choice of concrete professionals based on ease of use, field-proven durability, and accuracy for locating rebar, post-tension cables and conduits.

    By Geomorph Instruments based in Piraeus, GREECE.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you