Non-Destructive Testing (NDT) Equipment For Monitoring And Testing Available In Nova Scotia
-
ShowcaseManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
The Xact® 920 system is the latest application of SCI’s automated XRF module that allows for the analysis of continuously-drawn aqueous samples for user-selected metals. A measured amount of unknown sample is blended with a known amount of internal standard which is continuously nebulized, evaporated, and collected onto the filter tape. The liquid sample is aerosolized facilitating the ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The NIRS XDS Process Analyzer – MicroBundle provides the next generation of process analyzers for real-time analysis in the pharmaceutical and chemical industries. Non-destructive, accurate measurements of practically any sample type (powders, slurries, liquids,..) are performed directly in the process line, granulator, dryer or reaction vessel. Up to 4 probes and/or flow-cells can be ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Metrohm NIRS lab analyzers enable you to perform routine analysis quickly and with confidence – without requiring sample preparation or additional reagents and yielding results in less than a minute. Combining visible (Vis) and near-infrared (NIR) spectroscopy, these analyzers are capable of performing qualitative analysis of various materials and quantitative analysis of a number of ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
ST80 is a high performance, rugged thermal dispersion technology air/gas flow meter that combines ultra-reliable, feature-rich electronics, and FCI innovations such as Adaptive Sensing Technology (AST) with the industry's most extensive selection of application-matched flow sensors, including FCI's new "wet gas" flow element, to provide a truly superior solution for industrial processes and plant ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The Science of Process Gas Flow Metering Advanced, Future Ready! ST100A is high performance thermal dispersion technology gas flow meter that combines the most feature- and function- rich electronics, and FCI innovations such as Adaptive Sensing Technology (AST), with the industry's most advanced flow sensors to achieve a truly state-of-the-science flow metering solution for industrial processes ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The NIRS Analyzer Pro is a single point process analysis system based on high resolution diode array technology. It provides non-destructive analysis of solids, granules, or powders through a glass window directly in the process line without bypass - a true inline ...
-
PremiumManufactured by Enerpat Groupbased in CHINA
MSB-E Series Two Shafts Shredders are small to large size reduction machines suitable for processing a wide range of materials to a smaller size. The products can often be sold as is, or be sent for further processing through additional equipment. Throughout typically range between 300kg/hr – 20,000kg/hr+ depending on the model, material type and application. MSB-E Series Two Shafts ...
-
PremiumManufactured by Monarch Instrumentbased in USA
Nova-Pro is a series of powerful portable visual inspection and speed measurement tools. The Nova Pro UV 365 and 385 LED models provide a lamp mode for static inspection and strobe mode for stop-motion inspection of high-speed processes. NIST Traceable Certificate ...
-
PremiumManufactured by Datum Electronics Ltdbased in UNITED KINGDOM
Contactless Torque Transducers with flange couplings at either end with measuring ranges from 0-100Nm up to 30kNm as standard (bespoke sensors up to 16MNm) for a variety of in line static and rotary torque measurement applications. The Datum Electronics Series FF425 non contact flange torque sensor and FF410 torque sensors have been designed to fit easily inline with any drive train or test ...
-
PremiumManufactured by Datum Electronics Ltdbased in UNITED KINGDOM
Datum Electronics are able to provide both modular and custom designed torque and rotary strain measurement solutions, which can be complete as one off or as fully integrated OEM solutions. In many cases, it is better to use an existing shaft or test rig and use custom industrial sensors instead. This process reduces the cost of fitting a conventional torque transducer and it improves the torque ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 616 professional moisture meter provides you with a precise and non-destructive means of measuring the moisture content of wood and other building materials. The testo 616 professional moisture meter provides you with a precise and non-destructive means of measuring moisture in wood and building materials, and of monitoring the drying process after water damage. Simply select the ...
-
PremiumManufactured by AMS, Inc.based in USA
Reliability and careful selection of components, the distinctive ergonomic and functional design, as well as the continuous scientific research in collaboration with the most important Universities in Italy, has brought to the development of this series of instruments of the latest generation. The N type sclerometer – Novatest design – has been modified to get a higher degree of ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
Engine oil analysis is a reliable and mature non-destructive testing (NDT) technique used to monitor the condition of the engine in development, on the production line and for in-service maintenance. High performance reciprocating engines and jet turbines are complicated mechanical systems with many high speed moving parts. With five simple tests, the MiniLab EL delivers comprehensive on-site oil ...
-
PremiumManufactured by Enerpat Groupbased in CHINA
four shaft shredders, or name it quad shredders, are perfectly suitable for scrap size reduction applications such as e-waste, rubber tire recycling, RDF production, and contaminated materials where uniformed medium particle size is desired. The four shaft shredders are very robust and built to sustain tough operating conditions without ...
-
PremiumManufactured by Datum Electronics Ltdbased in UNITED KINGDOM
We also offer rotary power sensors, rotary torque sensors and torque meters that are capable of measurements above our standard range of 20,000NM to meet the needs of our customers within a commercial environment. Our standard torque sensor range incorporates the measurement of torque up to 60,000Nm, these provide solutions to most test and monitoring requirements. ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
NIRS XDS Process Analyzer systems can measure a variety of sample types, such as granules, powders, liquids, slurries, or opalescent substances, among others. These analyzers provide fast, nondestructive analysis of pharmaceutical, chemical, and petrochemical products. If required, up to 9 inline measuring channels can be multiplexed with this system. ...
-
PremiumManufactured by Enerpat Groupbased in CHINA
four shaft shredders, or name it quad shredders, are perfectly suitable for scrap size reduction applications such as e-waste, rubber tire recycling, RDF production, and contaminated materials where uniformed medium particle size is desired. The four shaft shredders are very robust and built to sustain tough operating conditions without problem. ENERPAT four shaft shredders are available in ...
-
PremiumManufactured by Datum Electronics Ltdbased in UNITED KINGDOM
These contactless Torque Transducers are not limited by operational speeds, can fit any shaft and capable of measuring torque from 1nm and up to 500knm, providing highly accurate and reliable torque measurement in many applications. ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
The Xact 640 system uses reel-to-reel filter tape sampling and nondestructive X-ray fluorescence (XRF) analysis to monitor stack hazardous air pollutant (HAP) metal emissions. An isokinetic sub-sample of stack gas goes into the stilling chamber and then drawn through a chemically reactive filter tape. Vapor phase metals, including mercury, are deposited along with particulate-phase metals on the ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A high performance, compact thermal imaging camera system designed for wide range screening of human body temperature measurements in Fahrenheit scale at mass screening or high pedestrian areas like airports, train stations, key operational ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you