Only show results available in Virginia? Ok

Non-Destructive Testing Services

  • Non-Destructive Testing Services

    Non-destructive testing from SGS – ensures the safe and efficient operation of your equipment and assets by detecting defects before they result in severe damage, and assures compliance with international standards. From construction sites, pipelines and refineries to shipyards and nuclear power plants, you need to monitor and improve the ...

    By SGS SA based in Geneva, SWITZERLAND. from Environment Service Service line

  • Field Based Services

    Energy plant installation and commissioning. On site training of customer engineers. Planned contract maintenance services. Reactive breakdown services. Statutory non-destructive test inspections. Site energy efficiency audits. Site steam supply audits. Burner retrofits. Plant strip-downs and servicing. Ratiotronic upgrades and retrofits.

    By Dunphy Combustion Ltd based in Rochdale, UNITED KINGDOM.

  • Calibration Services

    Sensor Technology has its own calibration facility capable of calibrating torque transducers up to 10,000Nm with weights calibrated against primary National Standards. It is also ISO 9001:2000 registered.

    By Sensor Technology Ltd based in Banbury, UNITED KINGDOM.

  • Environmental

    Risk Based Corrective Action,Phase I, II, and III Environmental Site Assessments,Due Diligence Investigations,Hazardous, Regulated, and Solid Wastes,Remedial Investigations and Feasibility Studies,Underground Storage Tank Investigations and Remediation,Groundwater and Soil Remediation, Monitored natural attenuation,Enhanced in-situ biological ...

    By DMS Environmental Services, LLC based in Bellefonte, PENNSYLVANIA (USA).

  • Non-Clinical Services

    Overall management of nonclinical development program,Toxicology consulting including providing expert opinions and strategic advice on preclinical and regulatory issues,GLP support (inspections, study monitoring, and SOP review and preparation),Selection of appropriate laboratories (cost benefit analyses and focused insight into strengths and ...

    By Intrinsik Inc. based in Mississauga, ONTARIO (CANADA). from Health- Pharmaceutical & Biotechnology Services Service line

  • Non-Destructive Testing

    Non-destructive testing from SGS – ensures the safe and efficient operation of your equipment and assets by detecting defects before they result in severe damage, and assures compliance with international standards. From construction sites, pipelines and refineries to shipyards and nuclear power plants, you need to monitor and improve the ...

    By SGS Power and Utilities based in Camberley, UNITED KINGDOM.

  • Laser Bond Inspection Services

    Laser Bond Inspection is an LSP Technologies created process for the non-destructive strength testing of bonded structures. The technology helps to ensure quality in bonded structures where other technologies have severe limitations and inadequacies.

    By LSP Technologies, Inc. based in Dublin, OHIO (USA).

  • Laser Profilometry Services

    Highly accurate measurement of the depth profile of corroded areas on pipeline or pressure vessels with the aim of performing FFS analysis. Corroded areas on pressure equipment need to be repaired or assessed before further service can be considered. Current methods usually involve using tools like bridging bars, pit gauges and ultrasonic probes ...

    By Applus RTD Group based in Rotterdam, NETHERLANDS. from Non-destructive Testing Service line

  • Effluents & Discharges Monitoring Services

    There are over 100,000 consented discharges to controlled waters in the UK alone. Many businesses also have processes producing trade effluents. These discharges will have quality conditions assigned and non-compliance can lead to prosecution and fines. OHES is your natural choice for monitoring your permitted discharge or effluent. We design ...

    By OHES Environmental Consultancy based in Berkshire, UNITED KINGDOM. from Environmental Monitoring Service line

  • Non Destructive Testing (NDT) & Inspection Services

    Advance Inspection & Testing Lab routinely perform non-destructive testing of mechanical components in Casting, Forging, Drawing, Machinery, Piping, Fire Ravaged Buildings, Boilers , Building structures inspection, structural inspection at site as well as in in-house NDT laboratory ranging in size from micro-circuitry to large steel castings, ...

    By ADVANCE INSPECTION & TESTING LAB based in New Delhi, INDIA. from Testing Services Service line

  • Non-Destructive Testing

    PT (liquid penetrant), RT (radiography examination), MT (magnetic particle), Brinnell hardness, tension test & charpy ‘U’ test, UT (ultrasound), Positive Material Identification (PMI)

    By Fabgroups Technologies Inc. based in Saint Laurent, QUEBEC (CANADA).

  • Radiography Services

    Radiography records the amount of radiation that penetrates a volume of interest. The inside of a sample can be examined with the penetrating radiation. The magnitude of the intensity of the radiation that penetrates the volume indicates the attenuation experienced within the volume. Areas of different attenuation can be identified by differences ...

    By Constellation Technology Corporation based in Largo, FLORIDA (USA). from Non Destructive Testing Service line

  • Environmental Plume Mapping Services

    When introduced to the environment, hazardous materials can wreak havoc on ecosystems that will have lasting affects. On a minor scale improper disposal of materials may cost nothing more than the expense of remediation and maybe a small fine but a large or continuous event could have catastrophic consequences for generations to come by ...

    By EnTech Engineering, Inc based in Saint Louis, MISSOURI (USA).

  • Non-Destructive Testing Services

    The modern geophysical – non destructive methods provide a short-timed, reliable and non-invasive means of investigation of the shallow subsurface and of building structure. Due to their nature of application, they are particularly suitable for large area investigation and repeated testing of an area or element of interest.

    By geotomi based in Palaio Faliro, GREECE. from Engineering and Near Surface Geophysics & Seismology Service line

  • Sterile and Non-Sterile Product Testing Services

    Eurofins Lancaster Laboratories offers a comprehensive range of microbiology services with strict adherence to cGMP requirements in support of sterile and non-sterile product testing and facility monitoring for biopharmaceuticals, including raw materials, cell lines and unprocessed bulk testing.

    By Eurofins Lancaster Laboratories, Inc based in Lancaster, PENNSYLVANIA (USA). from Biopharmaceutical Service line

  • Non Destructive Testing

    HTS Inc. performs non-destructive testing in the field and or fabrication shop of Structural Steel and Welded Steel , High Strenght Bolts , visual Weld Inspection, Magnetic Particle Inspection, Column Inspection, Nelson Stud Testing & Inspection and Welding Certification or verification.

    By HTS, Inc. Consultants based in Houston, TEXAS (USA).

  • Inspection Services

    FB&D In-plant & Source/Vendor Surveillance Inspection Services: FB&D offers a total inspection package designed to meet each client's needs and requirements. Our Inspectors function as representatives for our clients and serve under their direction as liaison between the owner/user and the primary fabricator and/or contractor. We also ...

    By Ford Bacon & Davis LLC (FB&D) based in Baton Rouge, LOUISIANA (USA).

  • Metallographic Lab Services

    To ensure that the coatings and cladding we provide meet the highest standards, we have a comprehensive testing lab on the premises that is permanently staffed. ASTM compliant and custom reports are produced to client requirements. Third-party verification is also available from a non-destructive testing company co-located on our compound in an ...

    By F.W. Gartner Thermal Spraying based in Houston, TEXAS (USA).

  • Ultrasonic Inspection Services

    The Ultrasonic inspection method employs sound waves to inspect parts and materials. This method is employed to characterize flaws such as cracks, delamination, porosity, voids, missed seams, adhesion, solder bonds and inclusions. In addition, material properties can be determined including elastic, density, sonic velocity, and heat treatment. ...

    By Constellation Technology Corporation based in Largo, FLORIDA (USA). from Non Destructive Testing Service line

  • Landfill Monitoring Service

    Eurofins Calscience offers analytical services to support groundwater monitoring and vapor testing in conjunction with landfill monitoring programs under Subtitle C and Subtitle D of the Resource Conservation and Recovery Act (RCRA). Subtitle D addresses monitoring of non-hazardous municipal landfills while Subtitle C addresses groundwater ...

    By Eurofins Calscience based in Garden Grove, CALIFORNIA (USA). from Specialty Analytical Services Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you