Non-dispersive Infrared (NDIR) Gas Detection News

  • New E8500 PLUS Portable Emissions Analyzer with Upgraded CO2 Measurements

    The NEW E8500 PLUS emissions analyzer is a complete portable tool for EPA compliance level emissions monitoring and testing. This model has been upgraded to measure up to 50% CO2 using an NDIR sensor. The E8500 PLUS is ideal for regulatory & maintenance use in boiler, burner, engine, turbine, furnace, and other combustion applications. NEW Features: CO2 ...

  • Quick TOC Online Analyser for Pure Water

    The QuickTOCpurity online TOC analyzer from LAR Process Analysers AG is specifically designed for pure water analysis. The sample is injected directly into the reactor using a special injection loop, thus avoiding sample contamination from any pollutants in the ambient air. At the heart of the TOC analyzer is the reactor, where thermal oxidation at 1,200°C takes place. At this temperature, ...


    By LAR Process Analysers AG

  • Smart and compact Infrared Sources for high-performance NDIR Gas Sensing

    Axetris EMIRS50 and EMIRS 200 compared in an internal test Gas sensors based on Non-Dispersive Infrared (NDIR) techniques have continuously gained popularity over the past decades. A number of clear trends in gas sensor design are visible today – gas sensors are getting smaller, consuming less power, and unit sensor cost is decreasing. At the same time the market is demanding improved ...


    By Axetris Ag

  • Smart and compact Infrared Sources for high-performance NDIR Gas Sensing

    Gas sensors based on Non-Dispersive Infrared (NDIR) techniques have continuously gained popularity over the past decades. A number of clear trends in gas sensor design are visible today – gas sensors are getting smaller, consuming less power, and unit sensor cost is decreasing. At the same time the market is demanding improved measuring performance (LDL) from gas sensing solutions. To ...


    By Axetris Ag

  • Edinburgh Sensors Continue to Commit to Customer Safety and Convenience

    Edinburgh Sensors was founded in 1988 and from then we have committed ourselves to developing gas sensing technology and equipment to the highest levels for all our customers. Since the 1940s Non-dispersive Infrared (NDIR) sensing has become an important, safe, reliable and accurate method for the detection of gases such as CO, CO2, ...


    By Edinburgh Instruments Ltd

  • Edinburgh Sensors develop cutting edge gas detection solutions

    At Edinburgh Sensors, we pride ourselves in being one of the leading manufacturers of robust NDIR gas detection solutions. The application of our continued research and development has contributed to several major advances in the world of infrared gas sensing which has allowed us to develop our comprehensive portfolio of NDIR products for the detection of CO, CO2 and CH4. ...


    By Edinburgh Instruments Ltd

  • TOC analyzer for pure water

    LAR's QuickTOCpurity is a tailor-made TOC analyzer (total organic carbon) for pure water and ultra pure water. The sample is injected via a special injection loop, avoiding any environmental influences to the sample. The heart of the TOC analyzer is the oven, where the thermal oxidation takes place. It works with the ultra high ...


    By LAR Process Analysers AG

  • LumaSense invites visitors to explore the new user-friendly website with improved navigation, functionality, and content

    LumaSense Technologies, Inc. introduced the updated website Mid-July and included many new features to help industrial users find the quality process monitoring and control solution information they need quickly and easily. Global ...

  • Designing drift-free and reliable NDIR gas sensors using modulated infrared sources

    Axetris IR sources are based on the proprietary thin film technology from Axetris, and deliver exceptional performance when electrically modulated in the 5-100 Hz range. This feature can help NDIR gas sensor designers achieve drift-free operation, combined with increased reliability and lifetime. Here we present qualitative conclusions (see table) based on multiple years of internal performance ...


    By Axetris Ag

  • NDIR Gas Sensors – Smaller, Leaner and more Cost-Effective

    Gas sensors based on Non-Dispersive Infrared (NDIR) techniques have continuously gained in popularity over the past decades. A number of clear trends in gas sensor design are visible today – gas sensors are getting smaller, consuming lesser power, and unit sensor cost is decreasing. NDIR gas sensing technology continues to build on the potential to complement and replace conventional gas ...


    By Axetris Ag

  • New E8500 Portable Emissions Analyzer with Upgraded CO2 Measurements

    The NEW E8500 PLUS emissions analyzer is a complete portable tool for EPA compliance level emissions monitoring and testing. This model has been upgraded to measure up to 50% CO2 using an NDIR sensor. The E8500 PLUS is ideal for regulatory & maintenance use in boiler, burner, engine, turbine, furnace, and other combustion ...

  • HORIBA Scientific Announces New EMIA-Pro Carbon/Sulfur Analyzer

    HORIBA Scientific, global leader in elemental analysis systems and solutions, just announced the EMIA-Pro, its newest Carbon/Sulfur analyzer.   The new EMIA-Pro Carbon/Sulfur Analyzer offers Non-Dispersive Infrared (NDIR) measurement capabilities, optimizing its ...


    By HORIBA Europe GmbH

  • New cleaning mechanism enables repetitive measurements up to 200 times

    HORIBA Scientific, global leader in elemental analysis systems and solutions, just announced the EMIA-Pro & EMIA-Expert, their newest Carbon/Sulfur analyzers. The new EMIA-Pro and Expert Carbon/Sulfur Analyzers offer Non-Dispersive Infrared (NDIR) measurement ...


    By HORIBA Europe GmbH

  • Edinburgh Sensors New Chillcard NG Range for CO and CO2 Gas Measurement

    The Chillcard NG range of NDIR gas sensors from Edinburgh Sensors has been extended to include two new gases; namely carbon monoxide (CO) and carbon dioxide (CO2). Our standard sensors for these gases use a miniature lamp with a tungsten filament as the source of infrared light. However, in applications such as endothermic gas annealing furnaces and gasification, where high levels of hydrogen ...


    By Edinburgh Instruments Ltd

  • New sensor capabilities for AQM Series

    Particles Plus revealed their new PID and NDIR environmental sensors, enhancing performance for their line of Air Quality Monitors. While previous versions performed to specification, the new sensors bring their environmental monitoring to a new level of accuracy and repeatability. The enhanced sensor for CO2 employs a sophisticated non-dispersive infrared (NDIR) detector that, coupled with free ...


    By Particles Plus, Inc.

  • Reducing Warm Up Time of NDIR Gas Sensors

    MEMS-based electrically-efficient infrared sources from Axetris — In a number of gas detection applications, a short warm-up time of the gas sensor is critical. Especially for applications where discrete measurements need to be made, and where the gas sensor is not continuously switched on, a short warm-up time is absolutely essential. This is the case for portable gas detection devices, ...


    By Axetris Ag

  • METTLER TOLEDO Expands the GPro™ 500 Analyzer Series

    METTLER TOLEDO has announced four additions to its growing portfolio of tunable diode laser (TDL) spectrometers. TDLs offer reliable, low maintenance gas analysis in chemical and petrochemical processes. Being a non-contact measurement technology that requires no moving parts, TDLs can often be more dependable and process tolerant than alternative technologies requiring sample extraction and ...


    By Mettler - Toledo Int. Inc

  • LumaSense Celebrates 10th Anniversary and 57+ Years in the Sensing Industry

    LumaSense Technologies, Inc. officially celebrated its 10th anniversary in August, but its legacy in the sensing industry dates back to 1958 with the founding of Impac™ Infrared, which LumaSense acquired in 2007. “We’re a young company with extensive experience in the sensing industry,” said LumaSense CEO, Steve Abely. Through a series of strategic acquisitions ...


    By LumaSense Technologies, Inc.

  • Everest Interscience`s Infrared Thermometers Measures Surface Temperature of Snow with Extreme Accuracy

    Everest Interscience offers a SNOW-THERM™ infrared temperature sensor that is designed solely for the purpose of measuring very low temperatures with extreme accuracy. Measure the surface temperature of snow banks, sometimes continuously, the SNOW-THERM™ is used to predict avalanche activity.  ...


    By Everest Interscience

  • Infrared Thermometers for Precision Outdoor Temperature Measurements

    Three distinct, patented, systems make Everest Interscience’s infrared thermometers unique for taking accurate temperature measurements outdoors.  These include the following:  a SKY-SPY™ System (U. S. Patent No. 4,420,465), VARIO-ZOOOM™ Field-Variable-Focus System (U. S. Patent No. 7,355,178), and TTL/SLR Intra-Optical Light Sighting System (U. S. Patent No. ...


    By Everest Interscience

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you