Non-Dispersive Infrared (NDIR) Gas Detection Equipment For Monitoring And Testing Available In Dominica
-
ShowcaseManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Easy handling and individual customizations. With the analyser EasyCEM gases can be measured such as CO, CO2, NO, SO2, SF6, THC with the NDIR method or with PID , as welll as gases like NH3, HCl and CH4 with a TDLS (tunabel diode laser). By extending further modules with NDUV or electrochemical measuring principles, it is possible to measure gases like O2, O3 or NO2. The analyser is particularly ...
-
ShowcaseManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
The UV-GAS-500 model gas analyzer is based on DOAS technology,able to measure the concentration of gases including SO2,NO2,NO,NH3,CL2,O3,H2S etc,It has features of high measurement accuracy ,outstandingreliablility,fast response time and wide applicable ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
VGT-100V Vehicle Emission Tester is a product designed on the basis of Vehicle Mass Analysis System (VMAS) of gasoline. It is used to measure concentration of exhaust gas discharged by vehicle engines, including NO, NO2, CO, CO2, HC, O2, etc. Among which, the measurement of NO and NO2 adopts UV Differential Optical Absorption Spectroscopy (UV-DOAS), the measurement of CO, CO2 and HC employs ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
The most commonly analyzed gas using a greenhouse gas analyzer is carbon dioxide (CO2). Other common gases that can be detected include methane (CH4), nitrous oxide (N2O), and various fluorinated gases. The two primary measurement techniques used for detecting these greenhouse gases are absorption spectroscopy and non-dispersive infrared detection. We mainly use NDIR technology to detect CH4, ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
CO analyzer adopts non-dispersive infrared spectrum and combines with advanced microprocessor technology. It provides accurate and reliable detection of CO at ppm level to meet the requirement of ambient gas monitoring.The principle is non-dispersive infrared based on gas filter correlation technology. CO molecule absorbs specific infrared light which is consistent with Beer-Lambert principle. CO ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme Quadset Refrigerant Gas Monitor is designed to detect refrigerant leaks in enclosed areas. The Monitor utilizes a sophisticated NDIR sensor specific to any one of the commercially available refrigerants. It can monitor over a range of 0-1000ppm with a resolution threshold as low as 1ppm. The QuadSet can monitor up to four locations in one of two modes of operation, diffusion or ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The flexibility of the IMR 5000 CEMS allows it to offer an endless set of possibilities to measure different parameters like CO. C02, NO. X02, CH4, HC, NH3, C12, HC1, H2, 03, S02, H2S, 02, Velocity, Draft, Dust, Temperature and other parameters on ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The eSense II is a cost-effective carbon dioxide transmitter designed to be installed in areas like office buildings or classrooms where carbon dioxide levels are monitored to determine occupancy levels for energy savings and indoor air ...
-
PremiumManufactured by ENVEAbased in FRANCE
The ENVEA MIR 9000P belongs to the new generation of ENVEA gas monitors, showcasing eco-design, IoT and on board intelligence. It measures simultaneously 8 gases – NOx, SO2, CO, CO2, CH4, N2O, O2 and residual H2O – and uses the non-dispersive infrared method (NDIR-GFC) with gas filter correlation. O2 is measured by a built-in SRM paramagnetic sensor. The analyzer has been designed ...
-
PremiumManufactured by membraPure GmbHbased in GERMANY
Designed for Total Organic Carbon (TOC) analysis of both ground water and ultrapure water, the uniTOC device utilizes comprehensive UV-based oxidation. This oxidation process can be further intensified by additional reagent dosage, such as persulfate. Employing the NDIR detector ensures precise outcomes across a spectrum of applications, spanning from ground water to ultra-pure water. The NDIR ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
CO analyzer adopts non-dispersive infrared spectrum and combines with advanced microprocessor technology. It provides accurate and reliable detection of CO at ppm level to meet the requirement of ambient gas monitoring.The principle is non-dispersive infrared based on gas filter correlation technology. CO molecule absorbs specific infrared light which is consistent with Beer-Lambert principle. CO ...
-
PremiumManufactured by ENVEAbased in FRANCE
Exists in single or dual stream version and “Ultra Low” version for low CO concentration measurements (0-10 to 0-50 ppm) Installed downstream a chiller, controlled at ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The TIM10 Desktop CO2, Temp, & Humidity Monitor continuously shows carbon dioxide, temperature, and relative humidity levels so you can monitor the quality of air in your home, office or indoor grow ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The CozIR-Blink Sensor is an ultra low power CO2 sensor that enables customers to manage the power consumption based on their needs and overall application or ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Measuring CO2 gas involves the use of two main technologies: Tunable Diode Laser Absorption Spectroscopy (TDLAS) and Non-Dispersive Infrared (NDIR). TDLAS is a relatively new technology that relies on the absorption of light in order to measure the concentration of CO2 in a gas. It uses a laser to detect the molecules in a sample, and then calculates the concentration based on their optical ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The K30 10% (100,000 ppm) carbon dioxide sensor module is a maintenance-free transmitter module intended to monitor high levels of CO2 found in storage tanks or biological applications. It is an accurate, low-cost solution for OEMs products like CO2 safety alarms or leak ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 5000 is state-of-the-art Continuous Emission Monitoring System, and is designed for a wide variety of stationary emission monitoring applications. The IMR 5000 is a stand-alone analysis system that works automatically. Available in a 19” rack mount or rugged wall mounted enclosure. The wall mount enclosure meets NEMA type 4X (IP65) standards. The modular approach of the IMR 5000 ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The GasLab Pro 10% Carbon Dioxide Sampling Data Logger (CM-1000-00-00-00-25) is designed to measure carbon dioxide concentrations in enclosed environments, used primarily in life sciences, incubation, scientific and medical ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The cordless battery-operated LEAKSPY C4 precisely measures the C4-FN concentration in air by means of a non-dispersive infrared sensor (NDIR sensor) and indicates the value on a graphic display in ppm. The device allows precise localisation of leaks by searching the highest C4-FN concentration.Thanks to the high resolution and detection limit, it is also possible to carry out integral ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The CO2, Temp, and RH Indoor Air Quality Monitor is a simple, low-cost, and maintenance-free fixed wall-mounted device. This unit is designed to be installed in indoor air environments such as homes, office buildings, classrooms, or commercial settings. The CM-225 uses a 3-color back-lit LCD display and provides a digital readout for individuals to view the current CO2 concentration levels. In ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you