Nox Monitoring Equipment For Monitoring And Testing In India
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multigas Sonimix 6000 C2 calibrator is designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, for parameters such as SO2, HC, BTX, CO, NOx and O3. The Sonimix 6000 C2 includes Mass Flow Controllers, GPT, ozone and self re-generable zero air generator and is equipped with – an inlet for high concentration mixtures of diluted ...
-
PremiumManufactured by ENVEAbased in FRANCE
Offers excellent performance for multigas measurements in dry sampling, including HCl, HF, NO, NO2, N2O, SO2, CO, CH4, TOC, CO2 and ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme GasPost II toxic gas sensor/transmitter measures CO and NO2 gas concentrations in enclosed areas and transmit its readings to a CEL-series monitor/controller over an addressable RS-485 “Daisy-Chain” sensor ...
-
PremiumManufactured by ENVEAbased in FRANCE
One single analyzer for the measurement of up to 50 parameters, to be selected according to the application. MCERTs certified. Based on the FTIR technology (Fourier Transform Infrared) for simultaneous measurement of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CH4, TOC, H2O, CO2, ...
-
PremiumManufactured by ENVEAbased in FRANCE
Standard Reference CLD method for low & ultra low NOx measurement, IR-GFC for CO, CO2, SO2, N2O, Nox, HF, HCl, TOC and O2 in a single analyzer. Fast and simultaneous measurements of up to 10 gases, available in 2 versions: NOx (CLD) and O2 (Paramagnetic) in 19’’ Rack or Tight box for low and ultra-low NOx monitoring. CO, CO2, SO2, HCl, HF, TOC, N2O (IR) + NOx (CLD) + O2 ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
When catalyst is added to the media chambers of an RTO it is then referred to as an RCO. The abatement device still relies on high energy recovery to minimize auxiliary energy usage. However, the VOC compounds will oxidize at lower temperatures with the use of catalyst, further lowering the need for auxiliary energy. This is a great option for catalyst friendly compounds. Multiple catalyst and ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multipoint multigas calibrator SONIMIX 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, NOx and O3. With the optional Ozone generator and GPT circuitry it is possible to verify the coherence of NO, NO2 and O3 analysers, and to determine the converter’s efficiency ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot NO2 is a robust NO2 Gas Monitor that can measure Nitrogen Dioxide parameters in the air. This NO2 gas detector uses Electrochemical Sensing technology to measure total NO2 in the air. The monitor is equipped with the NO2 sensor module. The sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by ENVEAbased in FRANCE
The In-Situ TDLS gas analyzer has been designed for meeting the requirements of a large range of CEMS and Process applications. LAS 5000XD uses Tunable Diode Laser Spectroscopy (TDLS) and comes in various models for measuring parameters such as NH3 + H2O, HF, CO + CO2, O2, HCl + H2O, ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Compact portable multigas analyser, capable of measuring up to eight flue gases in a range of combustion and emissions processes. Lancom 4 delivers the complete solution for portable flue gas analysis, integrated into a compact battery-powered unit able to measure up to eight gases simultaneously with nine separate sensors. Simple to set-up and easy to operate, Lancom 4 enables highly accurate ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 4001 is a stand alone ozone primary transfer standard able to generate ozone together with dry or wet air (optional) allowing to calibrate the ozone monitors in several points. It generates an outflow of 3 Nl/min air containing 10 to 1000 ppb O3, with stability and reproducibility of the concentration better than 1% relative. The extended range model generates 10 ppb to 10 ppm at 3 ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot NO is a robust Gas Monitor that can measure Nitric Oxide parameters in the air. AQBot monitors NO concentration in real-time and provides accurate and quick results. Oizom offers a wide range of sensor cartridges that provides a measurement range between 0-1000 ppm. The proprietary gas module senses and measures Nitric Oxide concentration as low as ten ...
-
PremiumManufactured by ENVEAbased in FRANCE
Offers excellent performance for multigas measurements in dry sampling, including HCl, HF, NO, NO2, N2O, SO2, CO, CH4, TOC, CO2 and O2 in process applications or for stack emission compliance. Multi-Gas NDIR-GFC analyzer (Non-Dispersive Infrared Gas Filter Correlation) measuring up to ten gases simultaneously, including Nitrogen Oxide (NO), Nitrogen Dioxide (NO2), Sulphur Dioxide (SO2), Carbon ...
-
PremiumManufactured by ENVEAbased in FRANCE
Heated Turnkey Gas Analysis System ideally suited for fast, continuous and simultaneous measurements of NH3 and NOx in DeNOx applications (SCR and SNCR). In DeNOx systems using urea injection with ammonia (NH3) as a reducing agent, the flow rate and control of NH3 must be continuously adjusted and controlled to prevent excess NH3 emissions (slip), to reduce environmental impact and cost of ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 2130 NOx converter tester has been designed to generate a stable NO2 concentration with a small reaction time. It is based on the sonic nozzles technology (ISO 6145-6 technology) and high stability pressure regulators. The NOx converter tester is often used together with a multi-steps gas divider also based on sonic nozzles and high precision pressure regulators. In order to validate ...
-
PremiumManufactured by ENVEAbased in FRANCE
The only system allowing the measurement of 1 or 2 independent streams in a single analysis ...
-
PremiumManufactured by ENVEAbased in FRANCE
The Cairsens© sensor allows specific pollutant measurement comparable to reference methods. The high quality sensors are renowned worldwide by our customers looking for the newest technologies in air quality monitoring. They offer precise and reliable measurement, and are calibrated using a reference-standard value. They come with a unique calibration certificate and don’t need any ...
-
PremiumManufactured by ENVEAbased in FRANCE
Perfect ammonia gas analyzer or multi-gas analyzer for the measurement in hot & wet flue-gas of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CO2, O2 and ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multigas calibrator with GPT, ozone and self re-generable zero air generator, Sonimix 3012/3022, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, CO, NOx and O3. ...
-
PremiumManufactured by ENVEAbased in FRANCE
Dedicated to the measurement of regulated pollutants such as ozone (O3), carbon monoxide (CO), sulfur dioxide (SO2), nitrogen oxides (NO- NO2 and NOx), and particulates PM10 and PM2.5, the e-Series of analysers, has been designed with a special consideration to the environmental impacts of the product during its whole ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you