Odor Sampling Equipment For Monitoring And Testing Available In Alberta
-
Manufactured by Olfasense Groupbased in NETHERLANDS
It’s always been tricky to take standardised samples directly from the skin and other surfaces. This is a particular issue in the field of cosmetic testing, where the data may be needed for anything from quality control to identifying off-odours. Luckily, Olfasense's innovative scent sampler is a breath of fresh air for anyone faced with this problem. It can take samples directly from the skin ...
-
Manufactured by IKA-Werke GmbH & Co. KGbased in GERMANY
The new IKA UTTD power control disperser gets its name from an even more powerful motor. The disperser assures the best stirring, dispersing, grinding and homogenisation results and has been devised in particular for the safe processing of infectious, toxic or odour-intensive ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The CSD30 is a sampling device for collecting air (odour) samples in gas sampling bags, with a default odour sampling duration of 30 minutes. Using the lung principle, the sample flows into the gas sampling bag through the sampling tube only, without passing through pumps or other equipment. The materials used for ‘wetted’ parts that are in contact with the sample flow are PTFE and stainless ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The ventilated sampling hood is used primarily for sampling non-ventilated, odour-emitting solid or liquid area sources. When sampling liquids, floats are attached to the sides of the hood. The hood itself is automatically ventilated by two radial fans with a constant volumetric flow. The inlet fan sucks in outside air via an exchangeable orifice and transports the air from the top into a ...
-
Manufactured by St. Croix Sensory, Inc.based in USA
The PureSniff system allows for the standardized presentation of undiluted odour samples. With a PureSniff device, you can conduct odour evaluations including overall intensity, hedonic tone, and odour character profiling. The PureSniff allows for in-house assessments for product development, material investigations, and QA/QC. ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The main benefit of the PureSniff system is that it allows the standardised presentation of undiluted odour samples. With a PureSniff device, you can measure an odour’s intensity, hedonic tone and pleasantness by the direct evaluation of an undiluted sample. The PureSniff II consists of two sealed tubes, which can be provided with gas sampling bags independently of each other, allowing for ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The main benefit of the PureSniff system is that it allows the standardised presentation of undiluted odour samples. With a PureSniff device, you can measure an odour’s intensity, hedonic tone and pleasantness by the direct evaluation of an undiluted sample. The PureSniff III consists of three sealed tubes, which can be provided with gas sampling bags independently of each other, allowing for ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The Olfasense vacuum air sampling box allows for taking air samples into sampling bags without the sample coming into direct contact with the pump. The box can fill up to 10-liter sampling bags, with a flowmeter allowing to adapt the filling rate of the bag. Through a observation window the operator can watch the inflation progress. The connections can be changed out for every sample to ...
-
Manufactured by Onose-8based in CANADA
ONOSE-8® is a stationary dynamic dilution olfactometer. Designed for laboratories and research centers desiring to perform odour analyses, this state-of-the-art olfactometer is used for quantification of odours with the use of up to 16 panelists. The olfactometer operating system, Olfaware, is easy to use and powerful. Onose-8 can perform a wide variety of tasks linked to olfactometric ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
Using the TO8-8 olfactometer, it is possible to work with eight panel members – which produces even more accurate measurement results and a higher statistical accuracy of the odour concentration of a sample. This olfactometer meets all requirements of a dilution device for olfactometric measurements according to EN 13725. The whole measurement programme is computer-controlled and runs ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The GSP dilutes the sample directly at the sampling point. Sample pre-dilution can be performed with nitrogen or synthetic air, whereby the pre-dilution ratio is fixed by the manufacturer (standard 1:10 with individual calibration data). The pre-dilution ratio can, however, be set to different exhaust air conditions on request by substituting the 1:10 screen with a sapphire screen accessible ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
Our standard odour sampling device consists of a vacuum container that is evacuated by a vacuum pump. The sampling point and the standard sampler are connected by a probe. When the sampling device is evacuated, the gas sampling bag inside sucks in sample air via the probe. The sampling device is constructed to make sure that none of its components come into contact with the sample air during ...
-
Manufactured by IKA-Werke GmbH & Co. KGbased in GERMANY
The new IKA UTTD power control disperser gets its name from an even more powerful motor. The disperser assures the best stirring, dispersing, grinding and homogenisation results and has been devised in particular for the safe processing of infectious, toxic or odour-intensive ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
Our ready-to-use sample bags have been designed to meet the quality requirements of EN 13725, to minimise the risk of contamination of odour samples. Olfasense’s sample bags are made of Nalophan® and PTFE tubing to minimise surface reactions with sulphurs. Within the ISO 17025 accreditation scope, the Nalophan® is tested according to No. 6.3.2 of the European Norm EN 13725 as well as according ...
-
Manufactured by Samplebags.eubased in NETHERLANDS
The Nalophan Gas Sampling Bags have been designed especially to respond to the quality requirements of EN 13725:2003 and ISO 17025, to minimize the risk of contamination of odour samples. The bags have an approximate capacity of 10l or 60l depending which sampling device is used. These Gas Sampling Bags are made of Nalophan® and PTFE tubing to minimize surface reactions with sulfurs. Within ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
This hood allows defined sampling of flow area sources with very low discharge speeds (e.g. biofilters and ventilated compost piles). The volume of the exhaust air flow is guided through the hood and the chimney, and is consolidated. The sampling hood has a base surface area of 1m2 and a chimney with a diameter of 150mm. It is easy to transport, as the chimney can be detached from the ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The TO9 olfactometer has all the functionality of the TO8, plus the dual-forced-choice method. It meets all the requirements of a dilution device for olfactometric measurements according to EN 13725. Using the TO9 gives you a complete description of an odour sample. The maximum dilution increases to 217, allowing you to measure samples of higher odour concentrations than is possible with the ...
-
based in SOUTH KOREA
-Application *Estimating the pollution rate of electronic appliances and interior construction materials *Estimating the odor of sample relative to the air dilution in an organic method *Estimating freshness and origin of foods *Mono-gas dilution analyzing function cope with detecting tube method *Various analyzing applications & required metage for users -Distinction *A sensor ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
Olfasense is reseller of Kynar and Tedlar sampling bags made from PVDF, offering sizes from 0.5 L to 1000 L. Tedlar and Kynar bags are commonly used for indoor air sampling, waste sites, storage tanks, stack sampling, soil gas sampling, gas blending, calibration test standards, and many other gas sampling needs. Tedlar bags are also recommended by many US EPA methods. The bags can be filled ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The EPD is an easy to use pre-dilution system for highly concentrated odour samples. It has been developed to increase the measuring range at high odorant concentrations for olfactometers. And, because it ensures that the odour concentration of the air is not too high, it also prevents self-contamination of the olfactometer. The EPD is designed for use in olfactometry laboratories and gives ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you