Odor Sampling Equipment For Monitoring And Testing Available In Czech Republic
-
Manufactured by Olfasense Groupbased in NETHERLANDS
It’s always been tricky to take standardised samples directly from the skin and other surfaces. This is a particular issue in the field of cosmetic testing, where the data may be needed for anything from quality control to identifying off-odours. Luckily, Olfasense's innovative scent sampler is a breath of fresh air for anyone faced with this problem. It can take samples directly from the skin ...
-
Manufactured by IKA-Werke GmbH & Co. KGbased in GERMANY
The new IKA UTTD power control disperser gets its name from an even more powerful motor. The disperser assures the best stirring, dispersing, grinding and homogenisation results and has been devised in particular for the safe processing of infectious, toxic or odour-intensive ...
-
Manufactured by Adtech Polymer Engineeringbased in UNITED KINGDOM
Tedlar® gas sample bags are generally used for gas, odour and automotive emission sampling for VOC’s. Tedlar® film is tougher and more economical than FEP and is commonly used in vehicle emission testing. Our gas sampling bags are manufactured in a range of standard sizes, from 1 to 300 litres, and the standard thickness of film offered is 50 micron, but any size can be made to ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The Olfasense vacuum air sampling box allows for taking air samples into sampling bags without the sample coming into direct contact with the pump. The box can fill up to 10-liter sampling bags, with a flowmeter allowing to adapt the filling rate of the bag. Through a observation window the operator can watch the inflation progress. The connections can be changed out for every sample to ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The CSD30 is a sampling device for collecting air (odour) samples in gas sampling bags, with a default odour sampling duration of 30 minutes. Using the lung principle, the sample flows into the gas sampling bag through the sampling tube only, without passing through pumps or other equipment. The materials used for ‘wetted’ parts that are in contact with the sample flow are PTFE and stainless ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The ventilated sampling hood is used primarily for sampling non-ventilated, odour-emitting solid or liquid area sources. When sampling liquids, floats are attached to the sides of the hood. The hood itself is automatically ventilated by two radial fans with a constant volumetric flow. The inlet fan sucks in outside air via an exchangeable orifice and transports the air from the top into a ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The main benefit of the PureSniff system is that it allows the standardised presentation of undiluted odour samples. With a PureSniff device, you can measure an odour’s intensity, hedonic tone and pleasantness by the direct evaluation of an undiluted sample. The PureSniff II consists of two sealed tubes, which can be provided with gas sampling bags independently of each other, allowing for ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The main benefit of the PureSniff system is that it allows the standardised presentation of undiluted odour samples. With a PureSniff device, you can measure an odour’s intensity, hedonic tone and pleasantness by the direct evaluation of an undiluted sample. The PureSniff III consists of three sealed tubes, which can be provided with gas sampling bags independently of each other, allowing for ...
-
Manufactured by St. Croix Sensory, Inc.based in USA
The PureSniff system allows for the standardized presentation of undiluted odour samples. With a PureSniff device, you can conduct odour evaluations including overall intensity, hedonic tone, and odour character profiling. The PureSniff allows for in-house assessments for product development, material investigations, and QA/QC. ...
-
Distributed by Renby Limitedbased in UNITED KINGDOM
Some industrial processes create foul smelling odours. Odour Control in Waste Processing, Landfill, Sewage treatment and Animal Rendering Suppressing is a constant a challenge. Preventing the odour is often impossible. Treating odours can be very difficult, especially in remote locations where water and power are not readily available. Until recently, it was not straightforward to make a ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The EPD is an easy to use pre-dilution system for highly concentrated odour samples. It has been developed to increase the measuring range at high odorant concentrations for olfactometers. And, because it ensures that the odour concentration of the air is not too high, it also prevents self-contamination of the olfactometer. The EPD is designed for use in olfactometry laboratories and gives ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
Olfasense is reseller of Kynar and Tedlar sampling bags made from PVDF, offering sizes from 0.5 L to 1000 L. Tedlar and Kynar bags are commonly used for indoor air sampling, waste sites, storage tanks, stack sampling, soil gas sampling, gas blending, calibration test standards, and many other gas sampling needs. Tedlar bags are also recommended by many US EPA methods. The bags can be filled ...
-
based in SOUTH KOREA
-Application *Estimating the pollution rate of electronic appliances and interior construction materials *Estimating the odor of sample relative to the air dilution in an organic method *Estimating freshness and origin of foods *Mono-gas dilution analyzing function cope with detecting tube method *Various analyzing applications & required metage for users -Distinction *A sensor ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
This hood allows defined sampling of flow area sources with very low discharge speeds (e.g. biofilters and ventilated compost piles). The volume of the exhaust air flow is guided through the hood and the chimney, and is consolidated. The sampling hood has a base surface area of 1m2 and a chimney with a diameter of 150mm. It is easy to transport, as the chimney can be detached from the ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The TO9 olfactometer has all the functionality of the TO8, plus the dual-forced-choice method. It meets all the requirements of a dilution device for olfactometric measurements according to EN 13725. Using the TO9 gives you a complete description of an odour sample. The maximum dilution increases to 217, allowing you to measure samples of higher odour concentrations than is possible with the ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The TO8s is the smallest four-station olfactometer in the world. It meets all requirements of a dilution device for olfactometric measurements according to EN 13725. Using the TO8s gives you a complete description of an odour sample. With all the functionality of the TO8, the TO8s is specially designed for travelling. For the user, this means measurements can be taken wherever you are in the ...
-
Manufactured by OdorPrep a brand of LabService Analytica srlbased in ITALY
OdorPrep® is an on-demand air sampling system. OdorPrep® is equipped with an integrated control panel and it comes with its own dedicated mobile application for the remote control of the system: allowing the operation of all sample lines, or individually as required. The OdorPrep application is available on Play Store©. ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The LiGaVa system vaporises any kind of liquid into the gas phase. Because time, volume stream, temperature and amount of liquid are all known variables, it is a highly standardised odour sampling system. It is also simple to operate: just inject a set volume of the liquid sample (e.g. a fragrance, aromatic, alcohol or fuel) into the LiGaVa, which will vaporise it. You can achieve the ...
-
Manufactured by Air Spectrum Environmental Limitedbased in UNITED KINGDOM
Odorprep is an on-demand system for odour sampling to BSEN:13725. A remotely or directly activated system with the samples securely stored ready for collection, eliminating the need for an on-site technician. Odorprep can be used for many applications such as odour investigation and assessments, site emissions testing, nuisance investigations and air quality ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The main benefit of the PureSniff system is that it allows the standardised presentation of undiluted odour samples. With a PureSniff device, you can measure an odour’s intensity, hedonic tone and pleasantness by the direct evaluation of an undiluted sample. As the operator triggers a volume flow, the odour sample streams out of the sample bag and passes through a funnel (diffuser) to the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you