Oil Alarm Equipment
-
PremiumManufactured by InterOcean Systems LLCbased in USA
The Slick Sleuth® SS320 and SS320EXd are designed for deployment in rugged settings such as offshore, coasts, harbors, inland waterways, industrial facility drainage and outfalls, or anywhere risk of an oil spill is a concern. The SS320 product series are used at marine terminals, particularly loading piers and wharves. These ...
-
PremiumManufactured by InterOcean Systems LLCbased in USA
The Slick Sleuth® SS300 and SS300EXd are designed for deployment in rugged settings such as offshore, coasts, harbors, inland waterways, industrial facility drainage and outfalls, or anywhere risk of an oil spill is a concern. The SS300 product series are used at refineries, power plants, heavy industries and terminals. These ...
-
PremiumManufactured by InterOcean Systems LLCbased in USA
The Slick Sleuth® SS100 is designed for installation in above ground storage tank (AST) facilities, oil terminals, equipment rooms, or anywhere early oil leak and spill detection is needed. Detects a broad range of oil types on water and on dry ground-including spills, slicks, and sheen in tank dikes, sumps, oily water separators, ...
-
PremiumManufactured by InterOcean Systems LLCbased in USA
The Slick Sleuth® SS100 is designed for installation in above ground storage tank (AST) facilities, oil terminals, equipment rooms, or anywhere early oil leak and spill detection is needed. Detects a broad range of oil types on water and on dry ground—including spills, slicks, and sheen in tank dikes, sumps, oily water separators, ...
-
Manufactured by Labkotec Oybased in FINLAND
OMS-1 oil separator alarm device for monitoring oil layer in an oil separator. OMS-1 alarm device is speacially designed for oil separators. It indicates when it is time to empty the oil separator and thus prevents harmful hydrocarbon emissions to the sewer ...
-
Manufactured by Labkotec Oybased in FINLAND
The OilSET-1000 level alarm instrument is specially designed for oil and water separators and grease traps. It is approved according to ATEX Directive 94/9/EC. The OilSET-1000 indicates when it is time to empty the separator and thus prevents harmful hydrocarbon emissions to the sewer ...
-
Manufactured by Inventive Systems Inc.based in USA
Self-cleaning 15 ppm Oil Content Alarm built with U.S.C.G. and A.B.S. approvals, fulfilling all the requirements of IMO Resolution MEPC.60(33), suitable for detection of oil-in-water from 2ppm to >150ppm. Power requirements: 120VAC, 50/60 Hz at 60 watts. Equipped with a 6 hole #150 Navy ...
-
Manufactured by Pollution & Process Monitoring Ltdbased in UNITED KINGDOM
The OFD-1 is an oil film alarm system providing in real-time measurement. The no-contact monitoring system comprises a weatherproof sensor and a separate controller with local display which provides telemetry outputs. The oil film detector may be integrated alongside a number of water quality instruments such as pH, conductivity, DO and ...
-
Manufactured by Arjay Engineeringbased in CANADA
Reliable monitoring of sumps and containments for oil spills. For separated Oil-on-Water applications, Arjay offers the Hydrocarbon Float Sensor. This floating sensor monitors the surface of water in sumps, tanks, and lagoons to alert when oil has separated to the water surface. This is typically used to alert of spills or control ...
-
Manufactured by Water Level Controllersbased in USA
Simplex Pump Down sensor with set points for Pump 1 On/Off, High Water Alarm, Oil Fault, and High Oil Alarm with Common Relay Wire Input. The 3SPD26R-ROD Checkpoint SmartProbe sensor is used in dirty water and elevator sump applications. The sensor provides a Simplex Pump Down, High Water Alarm, ...
-
Manufactured by Labkotec Oybased in FINLAND
The SET-2000 Oil/Sludge is equipped with two probes, one indicates the oil layer and the other indicates when there is sand or sludge between the sensing elements of the SET/S2 ultrasonic ...
-
Manufactured by Inventive Systems Inc.based in USA
Self-cleaning 15 ppm Oil Content Alarm built with U.S.C.G. and A.B.S. approvals, fulfilling all the requirements of IMO Resolution MEPC.60(33), suitable for detection of oil-in-water from 2ppm to >150ppm. Power requirements: 120VAC, 50/60 Hz at 60 watts. Equipped with a 6 hole #150 Navy flange. ...
-
Manufactured by Arjay Engineeringbased in CANADA
The HydroSense 3420 continuously monitors a clean water sample for oil leaks. The display, signal output, and alarm can be configured within the 0-100 ppm range. On-line alarm for oil presence in filtered effluent and cooling water. The HydroSense 3420 offers a low-cost approach to monitoring ppm concentrations of emulsified free ...
-
Manufactured by HSN-Kikai Kogyo Co., Ltd.based in JAPAN
Measuring oil concentration in the treated water of engine room bilge with high precision. It monitors and controls the oil concentration when bilge (Note 1) is discharged from the engine room after being treated by a bilge separator to sea if the discharged bilge satisfies the specified limits by the International Convention for the ...
-
Manufactured by Arjay Engineeringbased in CANADA
Reliable monitoring for the oil/water interface in separators. The probe is inserted into the separator or sump to the depth of desired oil accumulation. The electronics is calibrated to the capacitance field around the probe. As oil accumulates and displaces the water, the capacitance change around the probe tip is monitored to ...
-
Manufactured by Arjay Engineeringbased in CANADA
The sensing probe continuously monitors for the oil/water interface in a water filled sump or separator. It is typically used to control pumps, operate valves, or activate alarms. The 2852-OWS sensing probe monitors the capacitance field around the active probe tip. As the volume of separated oil increases in the separator or is drawn down ...
-
ShowcaseManufactured by InterOcean Systems LLCbased in USA
Slick Guard Oil Detection Buoy is an integrated turnkey, environmental monitoring system. The Slick Guard is a rugged and stable platform designed to be moored offshore or wherever a floating oil spill monitoring station is needed. Deployment areas include intakes of power production and desalination plants, industrial discharge channels, ...
-
Manufactured by Afriso Eurogauge Ltdbased in UNITED KINGDOM
The OSA monitors the level of the separated liquid in oil/petrol separators and generates an alarm signal when it is necessary to empty the separator. In addition, the maximum permissable level in the separator can be detected, preventing ...
-
Manufactured by Inventive Systems Inc.based in USA
BA-200 with a NEMA4X Weather Proof case. Not submersible. ...
-
Manufactured by Inventive Systems Inc.based in USA
BA-200 with a NEMA4X Weather Proof case. Not submersible. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you