Showing results for: Oil-In-Water Monitoring Equipment
-
based in GERMANY
For all ranges of the industry the continuous monitoring of oil in effluent during the direct or indirect discharge is a very important aspect. An operational disturbance is to be recognized therefore fast, and the emission source can meet appropriate measures, in order to limit the damage. The measuring procedure is based on the ...
-
Manufactured by PASI s.r.l.based in ITALY
Category : Water level indicator / Interface Meter. Brand : PASI. Item : ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS Interface Meters provide measurements of both floating and sinking hydrocarbons (non-aqueous product layers). These battery powered, portable reel-mounted instruments uses include measuring oil and water levels in monitoring wells and detecting tank leakage. When the probe of the interface meter is lowered down a well and contacts the ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS Interface Meters provide measurements of both floating and sinking hydrocarbons (non-aqueous product layers). These battery powered, portable reel-mounted instruments uses include measuring oil and water levels in monitoring wells and detecting tank leakage. When the probe of the interface meter is lowered down a well and contacts the ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS Interface Meters provide measurements of both floating and sinking hydrocarbons (non-aqueous product layers). These battery powered, portable reel-mounted instruments uses include measuring oil and water levels in monitoring wells and detecting tank leakage. When the probe of the interface meter is lowered down a well and contacts the ...
-
PremiumManufactured by Real Tech Inc.based in CANADA
Real Tech’s robust Hydrocarbons submersible probe provides affordable real-time measurements of Oil and PAH in water and is especially suited to monitoring municipal and industrial wastewater, surface water, raw water intake, as well as marine applications. The probe’s rugged design is built to ...
-
PremiumManufactured by AMS, Inc.based in USA
level readings are taken at the top of the casing with accuracy to within 1/100 of a foot (3mm). They utilize a durable polypropylene storage reel with a rugged solid aluminum frame. AMS Interface Meters are battery powered. These portable, reel-mounted instruments are used to measure oil and water levels in monitoring wells. They are also ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
The InfraCal 2 TRANS-SP is recommended for measuring oil in water, TPH in soil or FOG in wastewater concentration levels using the traditional EPA methods 413.2 and 418.1 or ASTM method D7066-04 and Freon-113, hydrocarbon-free grade of perchloroethylene, AK-225, S-316 or other spectroscopic infrared transparent solvent as the extracting ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
The InfraCal Model ATR-SP is recommended for measuring oil in water, TPH in soil or FOG in wastewater concentration levels when using hexane, pentane or Vertrel MCA as the extracting solvent. Measurement data obtained with this analyzer will correlate to EPA Method 1664 as both procedures are based on evaporation techniques and ...
-
PremiumManufactured by Real Tech Inc.based in CANADA
Real Tech’s Hydrocarbons sensor utilizes fluorescence measuring principal and provides rapid real-time measurement of hydrocarbons (oil) in water and wastewater. Continuous hydrocarbons monitoring can bring significant value to many applications including drinking water, wastewater and environmental ...
-
based in NORWAY
Most large international Oil & Gas operators have a strong focus on subsea technology, and increasingly more equipment is located subsea. However, subsea separation of oil / gas / water – with a large potential for cost savings – has not yet been implemented. Operators have stated that ” Oil in ...
-
Manufactured by Advanced Sensors Ltd. - part of PAC L.P.based in UNITED KINGDOM
Fluorescence is a long established measurement technique and the most widespread technique for measuring oil in water. The measurement principle is based upon a physical characteristic of aromatic hydrocarbons. When exposed to UV or low blue light, the aromatic hydrocarbons absorb the energy from that light (excitation) and give off ...
-
Manufactured by Yosemitech Technologies Co., Ltd.based in CHINA
Y517 OIW sensor detects the aromatic hydrocarbons (PAH) in water. The oil in water sensor measures the fluorescence of the hydrocarbon components in the water excited by UV light. An oil molecule absorbs the UVC light energy and then emits fluorescence light. UV fluorescence measurement method provides high ...
-
Manufactured by Ocean Visuals ASbased in NORWAY
AIR OWL™ (Oil-in-Water Locator) is a Hyper-spectral Laser Induced Fluorescence (HLIF) LiDAR (Light Detection and Ranging) for airborne remote detection, identification and quantification of oil spill in water measured from a fixed wing aircraft. The principal layout of AIR OWL™ consists of modules providing sensing ...
-
Manufactured by Yosemitech Technologies Co., Ltd.based in CHINA
Yosemitech Y4000 multi-parameter Sonde is one of the most comprehensive water quality monitoring product for dissolved oxygen, conductivity, turbidity, pH, chlorophyll, blue green algae, oil-in-water and temperature measurement in a single platform. The integrated wiper system can effectively prevent impacts from biofouling, air ...
-
Manufactured by Turner Designs Hydrocarbon Instruments, Inc.based in USA
The TD-2500 combines ultrasonics and a time-tested insertion probe to offer the ultimate in early detection of high concentrations, or slugs, of oil in waste water. Ultrasonic technology measures oil at high concentrations, typically seen after oil/water separation, is sensitive to droplets, solids or gas bubbles ...
-
Manufactured by Kytola Instruments Oybased in FINLAND
are water treatment, oil measurements, and sealing water measurements of vacuum pumps. Uses: gas flow measurement, oil lubrication measurement, seal water ...
-
Manufactured by Kytola Instruments Oybased in FINLAND
. It is a reliable instrument for measuring and monitoring liquid and gas flows. Typical applications are water treatment, oil measurements, and sealing water measurements of vacuum pumps.Uses: gas flow measurement, oil lubrication measurement, seal water ...
-
Manufactured by Turner Designs Hydrocarbon Instruments, Inc.based in USA
Solid Calibration Standards for the TD-500D, TD-3100, and TD-4100 Series Instruments. Instantly calibrate or check instrument performance without preparing liquid standards. Insert the CheckPOINT TM Solid Standard probe into the inspection port of your Turner Designs online oil in water monitor, or place it in the sample compartment of the ...
-
Manufactured by HSN-Kikai Kogyo Co., Ltd.based in JAPAN
Measuring oil concentration in the treated water of engine room bilge with high precision. It monitors and controls the oil concentration when bilge (Note 1) is discharged from the engine room after being treated by a bilge separator to sea if the discharged bilge satisfies the specified limits by the International Convention for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you