Water Treatment Modeling Equipment
-
PremiumManufactured by Skim-pakbased in USA
The 11800-DH has flow-controlled weirs with adjustable flow rate capabilities. The standard flow rate is 3 cubic meters per minute per meter of weir. The 11800-DH has 0.5 meters of total weir, and therefore is normally operated at a flow rate 1.4 m3/min, 370 gal/ min. Maximin flow rate is 500gpm. The 11800-DH excludes solid during the aeration cycle. Installation options include an articulating ...
-
Manufactured by Regal Systems, Inc. - Chlorinatorsbased in USA
The REGAL™ SMARTVALVE is designed to automatically regulate the gas feed rate needed to maintain the chemical residual level determined for a specific water treatment application. Different models are available to be used for chlorine, sulfur dioxide, or ammonia ...
-
Distributed by Solutex Ltd.based in UNITED KINGDOM
The economical answer to wastewater treatment. The Ci series provides small producers of wastewater with a simple low cost method of water treatment. These models are ideal for dealing with waste ink, paints and oil emulsions and much more besides. ...
-
based in BANGLADESH
Specially designed for water treatment plants. Model: DMS200, Flow rate: 0-10 l/h, Pressure: up to 10 bar (145 psi), Stroke rate: up to 160 strokes/minute, Wetted part materials: PVDF-T, PTFE, EPDM, FPM and ceramic, Power supply: 100–240 VAC 50/60 Hz, Ingress protection: IP65 Model : DMS200 Liquid : Acid/Chemical Dosing Head : ...
-
Manufactured by Salherbased in SPAIN
There are two models of truncated cone shape settlers: the closed solids settling tank CVC-DC-TC and the open solids settler CVA-DC-TC. Both equipment have a truncated cone shape, they are manufactured by Salher in glass fiber reinforced polyester with orthophtalic resins for underground installation and they are used for the ...
-
Manufactured by Hydro Systems Company - a Dover Companybased in USA
The model 590 solid dissolver provides diluted solution of one product held in an integrated reservoir, ready for on demand pumping when indicated by the system controller. The system provides a backup sump/float system to prevent spills in case of an overflow ...
-
Manufactured by Wuxi Yosun Environmental Protection Equipment Co.,Ltd.based in CHINA
Typical lamella clarifier design consists of a series of inclined plates framework components, see first figure. The untreated feed (raw)water stream enters from the top of body side and flows down a feed channel underneath the inclined plates. Water then flows up inside the clarifier between the inclined plates. During this time solids ...
-
Manufactured by Shijiazhuang Jiemu Machinery Equipment Co.,Ltdbased in CHINA
CQB stainless steel high temperature circulating pump acid transfer pump no-leakage magnetic pump adopts the magnetism transmission principle and cooling installation to transport corrosive medium of high temperature without leakage. ...
-
Manufactured by Neotec Inc.based in SOUTH KOREA
Low installation and operation cost. Adopted high efficiency LPHO / amalgam UV lamp. Cost efficient and easy maintenance with automatic wiper mechanism as a standard option. Applicable for small to medium size plants. Pre-wired cable leads for control panel and chamber using onetouch ...
-
Manufactured by Comex Srlbased in ITALY
Pump in cast-iron with double-channel impeller. This kind of impeller grants a good free passage for the solid parts contained into the water but it gives also an higher flow and head than the "vortex" impeller. This model with an heavy duty construction and double indipendent mechanical seals can be used to pump sewage water and ...
-
Manufactured by Comex Srlbased in ITALY
and the top quality oil bathed motor this model can be used to pump sewage water and ...
-
Manufactured by Filling Technologies srlbased in ITALY
ONDA 9 FILL PACK is composed of a series of corrugated sheets of high quality PVC. They are assembled with the direction of the corrugations inverted every two sheets and glued together to form a module. Maximum dimensions of the blocks are listed in TECHNICAL ...
-
Manufactured by Vapor Power Internationalbased in USA
Vapor Power electric hot water boilers are designed to provide fast, efficient, and economical hot water for heating and process through the use of electric resistance elements. The boiler controls automatically energize/de-energize steps of elements to maintain the desired water temperature. All boilers utilize ASME pressure vessels and ...
-
Manufactured by Wuxi Yosun Environmental Protection Equipment Co.,Ltd.based in CHINA
/ poly-electrolyte must be prepared from a powder polymer or a fluid concentrated polymer.Polymer is a product that must be well mixed with water to prevent clot formation. After mixing with water a certain maturation time is necessary to "unfold" the polymer chain. ...
-
Manufactured by Comex Srlbased in ITALY
Pump in cast-iron with "vortex" impeller. When the impeller turns, it creates a vortex pushing the water through the pump body. As the impeller is positioned in the upper part of the pump body it permits a wide free passage for the solid parts contained into the water. Thanks to its heavy duty construction, the double indipendent mechanical ...
-
Manufactured by Comex Srlbased in ITALY
Pump in cast-iron with "vortex" impeller. When the impeller turns, it creates a vortex pushing the water through the pump body. As the impeller is positioned in the upper part of the pump body it permits a wide free passage for the solid parts contained into the water. Thanks to its heavy duty construction, the double indipendent mechanical ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you