Opacity Monitoring Equipment For Monitoring And Testing In Europe
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
The Concept OPL 100 unit is designed to measure the density of smoke, dust, mist or fog between a given area. The system is low maintenance, double pass, dual beam transmissometer that consists of a transceiver (transmitter / receiver), and a passive retroreflector module. These components are stack mounted which are then interfaced with the control unit. The transceiver produces an ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
Ideal for monitoring levels of artificial Concept smoke and particulate levels in the exhaust gas of industrial combustion or air filtration processes. The CEL-046 is an optical instrument designed to measure the concentration of particulate matter in an exhaust gas passing through a duct, stack or flue; typically the exhaust gas from an industrial combustion process or air filtration ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A high-specification opacity and dust monitor meeting global compliance standards for monitoring combustion processes. 4500 MkIII is the most accurate and reliable continuous opacity monitor available, combining AMETEK Land’s ground-breaking innovation and simple design for precise, problem-free operation. Unmatched, class-leading accuracy ensures compliance limits for dust emissions and ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Simple, lightweight dust and opacity monitor designed to measure emission levels in combustion processes where regulatory compliance is not required (for sale in Asia only). The 4200 dust and opacity monitor is AMETEK Land’s compact, cost-effective solution for the continuous monitoring of dust, smoke and particulates in a wide range of industrial applications. NOTE: The 4200 is currently ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
High-sensitivity, forward-scatter laser measurement for particulate matter, for use in combustion processes where condensed water is not present (for sale in the USA and China only). 4650-PM provides the stable, accurate low-range measurement of particulate matter in stacks and ducts where water droplets are not present in the flue gas. NOTE: The 4650-PM is currently available only in the USA and ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Dust and opacity monitor, designed for measuring dust emission concentrations in combustion applications where automatic calibration checks are not required. The 4200+ is the most accurate and reliable monitor available for dust and opacity measurements in combustion applications not requiring automatic calibration checks and regulatory compliance. Optimised for multi-process plants using common ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
The 4400 is the most accurate and reliable monitor available for dust and opacity measurements in combustion applications not requiring automatic calibration checks. Optimised for multi-process plants, 4400 delivers you immediate performance and cost benefits through easy installation, simple operation and low maintenance requirements. A highly homogenous green LED light source, glass ...
-
PremiumManufactured by ENVEAbased in FRANCE
The QAL 260 series is suitable for measuring dust concentrations in Combustion, Incineration and other industrial stacks and is compliant with EN 14181. Having a 0-15 mg/m³ certification range, the QAL 260 sensor can be used at low or high dust levels. Due to dynamic ranging, the sensor is also suitable for much higher dust levels found in Power, Cement and Metals smelting ...
-
PremiumManufactured by ENVEAbased in FRANCE
Stand alone Cross Stack optical dust monitor suitable for measuring emissions after electrostatic precipitators and stacks without filtration systems. Used for emissions measurement (mg/m³) after electrostatic precipitators and baghouses or Process control applications. Advanced sensor design includes automatic drift (zero and span) ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 approved particulate CEM which meets US EPA PS-1 requirements for Opacity monitoring from combustion stacks. Robust multi corner cube reflector provides truer reflection of transmitted light compared to traditional “mirror type” reflectors providing greater confidence in measurement. ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
The CEL-022 is an optical instrument designed to measure the visible opacity (0-100%) of exhaust gas in a duct, stack, or flue; typically the exhaust gas from an industrial combustion process or air filtration system. The CEL-022 is available with or without an Operator Interface (control unit), so for the most cost effective monitoring solution the CEL-022 can operate as a ...
-
Manufactured by Codel - a Forbes Marshall companybased in UNITED KINGDOM
The DCEM2100 provides a continuous measurement of opacity or dust concentration in flue gases by continuously measuring the transmissivity of visible light across a process duct or stack. Its dual-pass optical arrangement is based on twin transmissometers measuring in opposing directions through the same section of the gas stream, providing not only an accurate average of the dust loading, but ...
-
Manufactured by NEO Monitors - a Nederman companybased in NORWAY
NEO Monitors LaserDust Medium Path (MP), Long Path (LP), and Extra Long Path (XLP) Monitors are compact, optical dust monitors for true continuous in-situ measurement of dust concentration or opacity. The monitors are designed for measurement across pipes, stacks, and ducts with typical path lengths of 0.5 – 10 m LaserDust Monitors use a transmitter/receiver configuration to measure the ...
-
Manufactured by Robert H. Wager Company, Inc.based in USA
The Model 6500 Smoke (Opacity) Meter accurately detects, measures, and provides a visual read-out of the opacity of smoke emitted by diesel engines. In addition, it is an excellent indication of the combustion efficiency of the vehicle, encouraging maintenance for greater fuel ...
-
Manufactured by Toragon ABbased in SWEDEN
The DSL-3000 is an advanced particulate monitor that offers high accuracy measurements with virtually zero drift and very low maintenance. Using our Dynamic Detection Principle (DDP), sometimes known as scintillation, the DSL- 3000 is immune to the long term drift seen in traditional opacity monitors (caused by a build up of dirt or dust on the optical surfaces), and it therefore has the ...
-
Manufactured by Thermo Scientific - Air Quality Instrumentsbased in USA
The Model 445 is a robust dust concentration monitor for a broad range of applications. The instrument features automatic check cycles, built-in 4 point linearity check and contamination ...
-
Manufactured by Dynoptic Systems Ltd - ACOEM Groupbased in UNITED KINGDOM
The DSL-320 Opacity Monitor is an optical instrument designed to measure the visible opacity of exhaust gas in a duct, stack or flue. The DSL-320 uses the double pass light transmission measurement technique, with a folded beam Transceiver/Reflector arrangement. A light beam emitted from the Transceiver (TRX) passes across the duct, stack or flue to a Reflector, which then returns the light to ...
-
Manufactured by Dynoptic Systems Ltd - ACOEM Groupbased in UNITED KINGDOM
The DSL-460 Opacity Monitor is an optical instrument designed to measure the visual opacity and/or concentration of dust or particulate matter in an exhaust gas passing through a duct, stack or flue. The DSL-460 uses the double pass light transmission measurement technique, with a folded beam Transceiver/Reflector arrangement. A light beam emitted from the Transceiver (TRX) passes across the ...
-
Manufactured by HST Systemtechnik GmbH & Co. KGbased in GERMANY
The „System Hydro-Klar“ clean water discharge equipment can be implemented in a variety of ways in both water supply systems and in waste water treatment plants. In SBR water treatment plants, they are used for the water level-based clean water separation during the SBR process. The automatic and optionally opacity measurement-regulated system conducts the clean water to the receiving ...
-
Manufactured by Fives Pillardbased in FRANCE
BENEFITS: Reliable, robust laser technology. Easy installation. Reduced maintenance. Unique simulated Zero and Span Calibration system. Continuous control of the optical surfaces. TÜV Approval acc. to 13. BlmSchV and TA Luft. MCERTS Performance Standard version 4, dated July 2018: EN15267 and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you