Open Channel Flow Measurement Equipment For Monitoring And Testing Near Virginia
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Ultrasonic sensor for level and flow measurement for connection to FMU9x (measuring range up to 20m). The FDU92 ultrasonic sensor for continuous, non-contact and maintenance-free level measurement of fluids, pastes, sludges and powdery to coarse bulk materials. But also for flow measurement in open channels and measuring weirs. The measurement is unaffected by dielectric constant, density or ...
-
Manufactured by Maid Labs Technologies Inc.based in CANADA
FlowMaid is a small open channel flow meter, which uses any level sensor to calculate flow from on a selection of 11 flow formulas. Each second, it records level, flow, volume and discrete events. Years of data can be recorded before filling its memory. Data can be downloaded through a USB key, WiFi, Internet or cellular modem. It automatically generates CSV reports of SSO events. The only ...
-
Manufactured by Maid Labs Technologies Inc.based in CANADA
Flow, real-time diagnostic, lower pump run time, cost reduction, increased safety. Abnormal behaviors are reported before degenerating to catastrophic events with real-time diagnostics using flow and efficiency monitoring. Pump run times, maintenance costs, and number and impact of SSO events decreases using our flow-based operating system. Volucalc Hybrid CS is a constant speed pump flow meter ...
-
Manufactured by Control Electronics Inc.based in USA
Control Electronics model PDS-360 Ultrasonic Open-Channel Flowmeter is a highly accurate, non-contacting liquid flow measuring device. The system monitors flow non-intrusively through any standard primary flow device using sophisticated ultrasonic ECHO ranging techniques. The sensor is supported above the liquid flow surface in the primary device and is microprocessor controlled providing ...
-
Manufactured by Bindicator - Specialty Product Technologiesbased in USA
The SonoTracker Ultrasonic Level System can monitor up to 16 vessels with transducers of various frequencies, and vessels of different heights and shapes and accurately measure the level of many different materials. It allows you to read levels from 1 foot to beyond 100 feet in solids, and additionally the same unit can be used for open channel flow and differential level ...
-
Manufactured by Valeport Ltd.based in UNITED KINGDOM
The Valeport ‘Braystoke’ Model 001 and Model 002 flow meters provide a cost effective and reliable method of monitoring flow in a variety of environments, including salt, fresh and effluent water, from shallow streams to tidal waterways. The meters benefit from the design of the impeller bearings, which give low threshold velocity and consistent performance. Their ease of operation ...
-
Manufactured by Valeport Ltd.based in UNITED KINGDOM
The Model 802 is the very latest in Valeport's electromagnetic flow sensing technology, developed over many years from the original IOS design. State of the art electronics design ensures low power operation, yet maintaining low noise and high stability. A range of sensor heads and electronics packages mean that the Model 802 can be used in a wide variety of real time applications, or can easily ...
-
Manufactured by Valeport Ltd.based in UNITED KINGDOM
The MIDAS ECM is a highly versatile point current meter, designed with durability and ease of deployment in mind. Valeport’s latest electronics architecture allows multiple additional sensors, and a variety of communications options, making it one of the few multiparameter current meters that allows real time operations over several thousand metres of cable, as well autonomous deployments. ...
-
Manufactured by Valeport Ltd.based in UNITED KINGDOM
This small solid-state sensor has been designed specifically for use in open channels where fouling by weed or sewage can be a problem. Valeport's experience in electromagnetic technology has ensured that the Model 801 is a high precision instrument which can be relied upon to give accurate readings (±0.5% of reading plus zero stability) over a wide flow range (±5 m/sec) in only 5cm ...
-
Manufactured by Valeport Ltd.based in UNITED KINGDOM
The Model 108 MkIII is the third generation of the successful Valeport 108 direct reading current meter, and has been developed to meet the needs of oceanographers, hydrographers and surveyors. Speed and Direction sensors are fitted as standard, with optional Conductivity, Temperature and Depth sensors. Full control and set up of the 108 MkIII and viewing of data is achieved directly via the ...
-
Manufactured by Valeport Ltd.based in UNITED KINGDOM
A low cost, lightweight alternative to larger flow meters, ideal for use in applications where the superior durability and depth rating of Valeport's larger meters is not necessary. Utilising the standard Valeport 125mm diameter impeller, the Model 106 features speed and direction parameters as standard, with further options of temperature and depth. Data (logged or real time) is compatible with ...
-
Manufactured by Valeport Ltd.based in UNITED KINGDOM
The Model 803 is designed specifically for use on ROVs and other underwater vehicles, providing real time relative water velocity information for pilots. It may be fitted to ROVs to provide actual through the water speeds, or fitted to Tether Management Systems to give measurement of local flow conditions. Measurements are updated every second and the ROVLog software provides a graphic and data ...
-
Manufactured by Valeport Ltd.based in UNITED KINGDOM
The Model 308 has been developed using proven industry standard sensors to meet the needs of oceanographers, hydrographers and surveyors who require an accurate current meter with flexibility of configuration and large memory capacity, which can output data directly to a PC and can be used in both self recording and direct reading modes with a variety of cables. All data is compatible with ...
-
Manufactured by FLO-CORPbased in USA
The FLO-CORP ChannelFlo™ OCRM Guided Wave Radar Open Channel Flow Meter features time domain reflectometry (TDR) technology and provides continuous level measurement in liquids, solids, and slurries, from clarifier effluent to large rivers. ...
-
Manufactured by FLO-CORPbased in USA
The FLO-CORP ChannelFlo™ UOCM Ultrasonic Open Channel Flow Meter's signal processing does not come in contact with the flow stream. The ideal measurement solution for liquid applications, from gravity fed sewer lines to storm water ...
-
Manufactured by FLO-CORPbased in USA
The FLO-CORP ChannelFlo™ OCRA Radar Open Channel Flow Meter uses through the air technology that does not come in contact with the flow stream. The ideal measurement solution for liquid, solid, and slurry applications, from sewers to ...
-
Manufactured by Primary Flow Signal, Inc. (PFS)based in USA
The PFS-OMT is designed for measurement of gas in pressurized piping, orifice meters of various designs have been popularized and in fact standardized (at least for the natural gas industry) for well over a half ...
-
Manufactured by Emerson Process Managementbased in USA
The Rosemount 3100 Series Ultrasonic Transmitter for reliable and cost-effective, non-contacting measurement. View documentation. The Rosemount 3100 Series Ultrasonic Level Transmitter is the reliable and cost-effective, non-contacting measurement solution from Emerson. Time proven ultrasonic technology with advanced software and state-of-the-art electronics delivers high reliability in a wide ...
-
Manufactured by Emerson Process Managementbased in USA
The Rosemount 3100 Series Ultrasonic Level Sensors provide reliable and cost-effective, non-contacting measurement. See the ...
-
Manufactured by MJK Automation - a Xylem brandbased in DENMARK
MJK 713 Open Channel Flow Measurement and registration of water flow. The converter is adaptable for many kinds and types of weirs and open channels. The built-in ISO 1438 formulas for flow calculations are preprogrammed with the most common flumes and weirs such as Parshall, Venturi, Palmer-Bowles flumes and V-notch and rectangular weirs. Also to be used with non-standard channels and weirs, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you