Open Path Gas Monitoring Applications available in Georgia
-
Premium
Open path ambient air quality monitoring
Proven Solutions for Fence-line and Perimeter Ambient Air Monitoring Offering 40 CFR 63.658, BAAQMD Rule 12-15 and SCAQMD Rule 1180 ...
By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).
-
Premium
Air Quality Monitoring Stations
Opsis provides complete AQM stations, used for street-level, urban trend and background applications. The monitoring systems have been approved by the German TÜV and the U.S. EPA among ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Fence-Line Monitoring of Fugitive Emissions
The Opsis open path monitoring system is an excellent tool for monitoring air quality, fugitive emissions and gas leaks at industrial sites. By arranging monitoring paths strategically at locations outside the borderline of an industrial area, fugitive emissions and gas leaks will effectively be detected. By combining the measured gas data with meteorological parameters information such as where the pollution sources are located and the strength of the emissions can be calculated, using the EnviMan ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Ambient air quality monitoring at airports
To measure the ambient air quality at airports is a challenge. The monitoring site needs to be representative for background levels and not dependant on changes in local traffic. A large number of gaseous components need to be measured with high accuracy and high availability. The OPSIS DOAS system provides the user with a fast system that gives high availability at low cost. The impact of aircraft take-offs and landings can easily be followed on-line. The OPSIS system can also monitor fugitive emissions from ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Continuous emissions monitoring solutions for steel plants
The nature of steel manufacturing processes places severe limitations on the monitoring methods that can be used. Aggressive environments combined with high levels of particulates and gases make the choice very ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Continuous emissions monitoring for aluminium smelters
Process control and emissions monitoring in an aluminium smelter is a challenge due to the high concentrations of HF. To use an extractive system in this environment will demand a lot of ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Emissions Monitoring
The Opsis monitoring solution in aluminium smelters is based on either DOAS or laser diode technique. The on-line, open-path systems are used for monitoring HF and sulphur dioxide in potrooms, in fence-line applications and in continuous emissions monitoring. Opsis has long experience of monitoring in aluminium ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Ambient air quality monitoring solutions for tunnel monitoring
Car tunnels need ventilation in order to keep air pollution below the limits. When the pollution levels reaches a setpoint, the fans must be started and kept running until the pollution levels ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Emissions Monitoring for Airports
Opsis systems provide high-performance monitoring of the emission activities within an airport. The rapid system allows on-line monitoring of the emissions from each aircraft at take-offs and landings, monitoring of fugitive emissions from stationary sources and differing of the airport sources from the surrounding pollution ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Solutions for fence-line and perimeter ambient air monitoring
Cerex Multi-Gas Open Path Analyzers are available in both FTIR and UVDOAS technologies to meet specific requirements for perimeter ambient air quality monitoring, leak detection, fugitive emissions monitoring and ambient air quality monitoring. Cerex multi-gas analyzers offer significant advantages over single gas analyzer arrays, electro-chemical sensor arrays and time integrated air sampling ...
By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).
-
Premium
Ambient stations for ambient air quality monitoring
Ambient air monitoring involves the measurement of 'representative' air in urban, industrial and rural areas. These measurements are used to determine the human exposure to pollutants and can be combined with trace/background ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Continuous emissions monitoring solutions for mining & smelting
OPSIS non-contact monitoring solutions, based on either DOAS or TDL techniques, are very well suited for applications in the mining and smelting Industries, as the flue gas conditions often involve high temperatures and high dust ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Ambient air quality monitoring solutions for urban air quality monitoring
To measure air quality in the ambient air is a challenge. The monitoring site needs to be representative and not dependant on changes in local traffic. A large number of gaseous components need to be measured with high accuracy and high ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Emissions Monitoring for Tunnels
The Opsis monitoring solution is designed for high-quality gas measurement in traffic tunnels. The monitoring systems have been approved by the Germany TÜV and the U.S. EPA among ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Emissions Monitoring for Mining / Emissions Monitoring for Smelting
The Opsis monitoring solution for mining and smelting applications is based on either DOAS or laser diode technique. Opsis non-contact monitoring solutions are very well suited for applications in the Mining and Smelting Industries, as the flue gas conditions often involves high temperatures and high dust concentrations. The on-line, open-path systems are used for monitoring HF, sulphur dioxide, SO3 and HCl in potrooms, in fence-line applications and in continuous emissions ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Ambient air quality monitoring solutions for street-level monitoring
To measure the air quality in a city is a challenge. A large number of gaseous components need to be measured with high accuracy. The monitoring site needs to be representative for the city and the system has to be easy to maintain and calibrate. The OPSIS open-path monitoring systems provide a flexible solution, giving the average concentration for an area. A single OPSIS system can measure all relevant gaseous components set by the authorities, such as NO, NO2, SO2, O3, BTX, ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Ambient air quality monitoring solutions for fence-line monitoring
The OPSIS open-path monitoring system is an excellent tool for monitoring the air quality, fugitive emissions and gas leaks at industrial sites. By arranging monitoring paths strategically at locations outside the borderline of an industrial area, fugitive emissions and gas leaks will effectively be detected. By combining the measured gas data with meteorological parameters information such as where the pollution sources are located and the strength of the emissions can be calculated, using the EnviMan ...
By OPSIS AB based in Furulund, SWEDEN.
-
Portable Leak Detection
GasFinder2 can be used as a portable open path gas sensor to survey a large site relatively quickly. Areas of elevated gas concentration can be bracketed using shorter path lengths in order to locate leaking valves, flanges or ...
By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).
-
Simultaneous Air Monitoring over Multiple Fixed Sample Paths
Application: Simultaneous monitoring over multiple fixed sample paths either in-situ, extractive, or open path. Example: HF scrubber inlet, outlet, and stack monitoring in primary aluminum ...
By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).
-
Gas Detection Solutions for GHG Monitoring
Most sources of fugitive emissions are from multiple points rather than single point sources. So, open path area or perimeter monitoring provides more meaningful fugitive emissions data than an array of point sensors or a program of grab sampling. Point measurements may underestimate emissions because of missing locations with high gas concentrations, or conversely overestimate because they are located in areas of high concentrations. Grab sampling programs typically check only a small percentage of potential leak ...
By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you