Optical Particle Analysis Equipment For Monitoring And Testing Available In Tajikistan
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
LiQuilaz II optical liquid particle counters are volumetric monitors with a variety of sizing sensitivities as low as 0.2 µm. They provide high precision analysis for most process chemicals, including hydrofluoric acid and hot corrosive chemicals up to 306 °F (152 °C). LiQuilaz II sensors provide the same levels of accuracy, reliability and repeatability that customers have trusted ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot PM is a robust particulate matter Monitor that can measure PM levels in the air. This PM detector uses laser scattering technology to measure PM1, PM2.5, PM10, and PM100 concentrations in the air. The industrial PM monitor is equipped with an optical particulate matter sensor. This sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Complete flow control of ultrapure water through a liquid particle counter is critical to ensure accurate and actionable data. Particle Measuring Systems (PMS) offers the new FC-200 and FC-100 series of pressure balancing flow controllers as the perfect complement to our high precision liquid particle counters. The FC-100 automatically adjusts to pressure changes within the particle counting ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Ultra DI® 50 Liquid Particle Counter is designed specifically for de-ionized (DI) water systems and will count and size contaminants as small as 0.05 μm. Larger sample volumes and ultra-low zero count capability allow you to detect smaller excursions with more relevant statistical data, with shorter sample intervals for quick data analysis so you can respond immediately to ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The High Sensitivity Liquid in Situ (HSLIS-M65e) Liquid Particle Counter provides continuous, real-time monitoring of contamination levels in corrosive liquids, including hydrogen fluoride (HF). A long-standing and ever-popular piece of Particle Measuring Systems‘ (PMS) complete liquid particle counting line, the HSLIS Liquid Particle Counter makes it easy to always understand the ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
Dustroid is a Continuous Air Particulate Monitoring system to measure the concentration of dust particulates in the ambient air. The dust monitor range is capable of monitoring various sizes of particulates ranging from 1 micron to 100 microns such as Ultrafine Suspended Particulate Matter PM1 (UFPM), Respiratory Particulate Matter PM2.5 (RSPM), Suspended Particulate Matter PM10 (SPM), and Total ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Ultra DI 20 Plus liquid particle counter from Particle Measuring Systems (PMS) provides groundbreaking capabilities for monitoring of the most demanding ultrapure water systems. Counting and sizing contaminants as small as 20 nm in combination with real-time statistical analysis enables efficient characterization of filtration systems and optimum process control. The thermal stabilization ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The Dustroid Pro is an Online Dust Monitoring System specially developed to dust levels for critical applications. Dustroid Pro operates on the Laser Scattering Working Principle. Dustroid comes with a heated inlet for dehumidification of air-sample for improved accuracy and stability. Heated inlet reduces dehumidifies the air-sample by reducing humidity up to 60%, which makes it an ideal ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The Dustroid Smart is an air particulate monitoring device specially developed to monitor ambient dust particles. The Dustroid Smart is a compact and connected optical particle counter which offers near real-time particulate matter count. The easy to install and the requirement for minimal space for deployment make it a scalable solution to create a dense network of data points. The Smart version ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
It has an excellent design, requires less optical and mechanical maintenance, provides clear viewing and is easy to use. Excellent optical system. Choice of high-performance objective lenses. Ergonomic eyepiece observation ...
-
Manufactured by Guangzhou Luftmy Intelligent Technology Co., Ltdbased in CHINA
HPD05 PM2.5 Sensor Module use principle of optical scattering to measure concentration of dust inthe air,the module built in a Infrared Transmitter and a high sensitive Photoelectric Receiving Sensor the Infrared Transmitter emits light and the light meets the dust to produce the scotch light, theintensity of the scotch light detected by Photoelectric Receiving Sensor reflects the concentration ...
-
Manufactured by PerkinElmer, Inc.based in USA
The LPC 500 Liquid Particle Counter is a single particle optical sizing (SPOS) system designed to count and size particles individually with high resolution. When used for in-service oil samples, only 4 mL of 10x diluted samples are typically needed, offering reproducible results between high- and low-viscosity samples, while also minimizing washout requirements and solvent ...
-
Manufactured by Entegris, Inc.based in USA
Whether you are trying to create foam or prevent foam Teclis has the instrument for you. The FoamScan® and FoamSpin® instruments by Teclis were developed to quantify foaming in liquids. Foam is generated under controlled conditions and is measured in real time. How much foam is formed and how fast it disappears is quantitatively determined. In addition, the amount of liquid trapped in the ...
-
Manufactured by Spectrex Corporationbased in USA
The HPC600 handheld laser particle counter is the latest innovation in the demanding application of airborne particle counting. It is useful in counting particles in ultra-clean environment by its single particle counting ability. The instrument consists of a handheld set with a main base unit that allows users to conduct the sampling with a handheld set while easily expanding to multiple ...
-
Manufactured by Hellma GmbH & Co. KGbased in GERMANY
Hellma Materials BaF2 features an excellent transmittance in the VIS and IR spectral ranges up to 12µm. This allows the usage of BaF2 as broadband optical material in the VIS and IR dual-channel systems for visible and thermal imaging. BaF2 has a lower refractive index than many other optical materials. This reduces transmission losses caused by ...
-
based in GERMANY
SECURE YOUR DISCOUNT TODAY! Nano Particle Counter and Sizer. The GRIMM SMPS+C systems feature the Vienna-type DMA design (Winklmayr et al., 1991; Reischl et al., 1997), well known for highest size resolution and lowest particle diffusional losses – even for the smallest particles. The SMPS+C systems based on the GRIMM 5416 CPC are operated at an aerosol inlet flow rate of 0.3 L/min and a ...
-
Manufactured by Entegris, Inc.based in USA
The AccuSizer AD is our most popular system based on the single particle optical sizing (SPOS) technique used for general particle size analysis applications. The AccuSizer AD provides exponential autodilution to your sample, automating sample preparation while still providing accurate concentration information. Inject your sample into the mixing vessel and let the AD system do the ...
-
Manufactured by Markus Klotz GmbHbased in GERMANY
The aerosol generator ATM 225 is used for generating test aerosols with defined properties. The number concentration of the aerosol particles can be set. From the determined concentration distributions of the produced DEHS aerosol it becomes evident that in the range of expected MPPS (Most Penetration Particle 0.2-0.3 μm) a very high particle concentration is provided (> 107 particles/cm3). ...
-
Manufactured by PAMAS - Partikelmess- und Analysesysteme GmbHbased in GERMANY
Particle counter for the remote on-site analysis of fluid samples – pressureless sampling and up to 420 bar system pressure testing. The PAMAS S40 is a portable particle counting system for oil-based liquids like hydraulic and lubricating oil. A wear resistant ceramic piston pump guarantees a constant flow. With a simple-to-use touch screen user interface, operation is easy and intuitive. ...
-
Manufactured by Bettair Cities S.L.based in SPAIN
The bettair Static Nodes can measure various air pollutants as well as ambient noise level and other environmental parameters. The bettair Static Nodes are standalone sensor devices. The nodes require to be main powered, or an external battery, or a solar panel. They transmit data directly to a server for cloud ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you