Oxygen Analyzers Equipment For Monitoring And Testing Available In Bulgaria
-
ShowcaseManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 902D is a benchtop oxygen and CO2 headspace analyzer, primarily used for gas flushed food packages. Achieve accurate oxygen and carbon dioxide measurements in 20-25 seconds. This headspace analyzer contains an internal pump to draw in sample from your package and display O2 and CO2 concentration results in 30 seconds. The expected oxygen sensor life is typically 5 years, unlike ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 201 is a portable oxygen analyzer used primarily for the measurement of O2 concentration in gas flows, chambers, or gas flushed hoods (such as glove boxes). The analyzer comes with both an “open faced” fitting and a T-fitting, allowing it to be used for analyzing gas flows, or set in chambers where oxygen levels need to be monitored. The sensor operation is not ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The TecPen Oxygen (O2) and Carbon Dioxide (CO2) Weld Purge Analyzer is designed to provide accurate measurements down to 0% oxygen and up to 100% carbon dioxide when back purging with argon and CO2 gas mix during welding. ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
It applies to the measurement of oxygen content in high-temperature atmospheres in industrial heating devices such as metallurgy, electric power, heat treatment, ceramics, cement, etc. In-line structure, the fast response speed of the probe, direct conversion of oxygen content into electrical signal output, real high-temperature detection, the probe is made of a high-temperature resistant sensor, ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The OXYMAT 6 also meets the high standards in demanding applications through modern electronics, ease of operation, and a physical element that is adapted to the measurement ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
For oxygen standard applications. The OXYMAT 61 is a cost-effective oxygen analyzer for standard applications. The OXYMAT 61 requires ambient air as reference gas. This is supplied by a pump that is integrated into the analyzer housing. Alternatively, pressurized bottle air can be used. The OXYMAT 61 measures oxygen using the paramagnetic alternating pressure method. This guarantees perfect ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
IMR 6400 High Temp intelligent oxygen analyzer uses an advanced anti-interference circuit and an anti-volatile data protection function. The display will automatically switch to any range for the set limit concentration on the ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
LGT-100 is a flameproof in-situ type analyser capable of analysing O2, CO, NH3, CO2, CH4, H2O, HCl, HF and other gases in various and complex conditions. The LGT-100 laser gas analyser can be directly installed across stack, with the advantages of uncomplicated sampling, no pre-treatment system, simple construction and no moving parts. The analyser’s OLED screen benefits from low power ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model ZR1000 is a trace oxygen analyzer used for the measurement of trace oxygen in all types of inert environments. The ultra-fast zirconia sensor will respond from 1000 to 10 ppm in about 23 seconds, as opposed to other instruments which may take minutes to reach 10ppm. This unit is powered by an AC to 12Vdc power supply/adapter, or an optional Ni-MH rechargeable battery pack, with ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
GA-5000 laser gas analyzer uses TDLAS technology and long-path reflection technology, which greatly improves the detection limit. It can analyze O2 , CO2, NH3 , CO , CH4, H2O, HCl, HF, etc, providing a new solution of online measurement of trace gases for natural gas, petrochemicals, environmental protection and steel and other ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The GasLab Plus CM-505 is a Multi-Gas Detector designed to measure carbon dioxide (CO2), carbon monoxide (CO) Oxygen (O2), relative humidity and temperature in a variety of applications. With long-term data storage, the user can measure ambient gas levels by data displayed and gain indication by visual and audible alarm settings. ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A highly flexible range of high-precision flue gas oxygen analysers developed specifically for combustion analysis and control applications. Using AMETEK’s industry-proven zirconium oxide sensor technology, the WDG-1200/1210 range provides the world’s first fully-integrated, standalone flue gas oxygen analysers. The user interface is mounted onto the probe, lowering installation ...
-
PremiumManufactured by WTW - a xylem brandbased in GERMANY
The IQ SENSOR NET is of modular design and grows with your ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 901 is a battery-operated, portable headspace oxygen analyzer. Other headspace analyzers require a new sensor every 1-2 years. The Model 901 is equipped with a long life sensor, expected to last 5+ years. The Model 901 is trusted by small and large food packagers, producers, and quality control personnel throughout the world. Use it in the lab, or on the packaging line. ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 62 MOx is the next generation in measuring NO/NOX , O2 and CO2. Unique in speed and precision, the nCLD 62 MOx is modular designed and allows the continuous measurement of concentrations in the range of parts per million. The measuring principles comply with international emissions monitoring regulations and its new and intuitive user interface individually displays and connects to other ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Continuous Emission Monitoring System CEMS II e offers modular and TÜV and MCERTS certified (QAL1) solution for environmental compliance in industrial processes, such as powerplants, waste incineration, cement plants and beyond. The system adjusts to changes in regulations and future advances of emissions monitoring best practices with ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Analyzer for Oxygen Measurements: Gasmet oxygen analyzer is designed for continuous oxygen measurement of wet or dry flue gas. This extractive analyzer is suitable for various industrial applications where reliable and accurate oxygen measurement is ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Our oxygen analyzers come in a variety of models and technologies. We can supply electrochemical-based oxygen analyzers that are suitable for intermittent or continuous measurements, featuring high accuracy, fast response times, low power consumption and a long life span. For applications that require higher accuracy and stability readings over wide ranges of temperature and pressure, we offer ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
LGT-200 laser gas analyzer uses TDLAS technology and long-path reflection technology, which greatly improves the detection limit. It can analyze O2 , CO2, NH3 , CO , CH4 , H2O, HCl, HF, etc, providing a new solution of online measurement of trace gases for natural gas, petrochemicals, environmental protection and steel and other industries. ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Q2 is a Portable Oxygen and CO2 analyzer, used for research or package testing. The Q2 is a portable headspace analyzer for measurement of O2 and CO2 levels in gas flushed MAP packages (such as coffee or meat products). Alternately, the Q2 can be used for portable O2 and CO2 measurements for research applications (such as cell culture incubators). It weighs only 2 lbs, and comes with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you