Oxygen Gas Monitoring Equipment For Monitoring And Testing In Australia
-
Manufactured by Gas Detection (Australia) Pty Ltdbased in AUSTRALIA
The GDA 40125 Gas Detection Controller is a standalone gas detector unit with inbuilt display, sounder, flasher, relays and alarm driver. Available in the full range of GDA 2500 series electrochemical sensors which are temperature compensated and easily replaceable. Designed, manufactured and supported locally in ...
-
Manufactured by Conspec Controls Limitedbased in CANADA
CONSPEC’s CX Series is an economical choice for toxic, combustible, and Oxygen gas monitoring. The CX Series is a simple and “smart” gas detector designed for use in hazardous or classified locations. An industry standard 4-20mA Analog output signal can be connected to any existing PLC, DCS, or EMS system. A simplified calibration procedure allows for a quick, non-intrusive, ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
Compact, reliable and easy-to-use, the ToxiRAE Pro doesn’t get in the way of workers doing their job and provides unmistakable five-way local and remote alarms if a threat is detected or a man is down. Plus, it offers the flexibility of easily swappable sensors to monitor for different gases in different situations. This personal, wireless monitor for toxic gases and oxygen keeps workers ...
-
Manufactured by Conspec Controls Limitedbased in CANADA
CONSPEC’s CN Series is an economical choice for toxic, combustible, and Oxygen gas monitoring. The CN Series is a simple and “smart” gas detector. An industry standard 4-20mA Analog output signal can be connected to any existing PLC, DCS, or EMS system. A simplified calibration procedure allows for a quick, non-intrusive, adjustment free ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A highly flexible range of high-precision flue gas oxygen analysers developed specifically for combustion analysis and control applications. Using AMETEK’s industry-proven zirconium oxide sensor technology, the WDG-1200/1210 range provides the world’s first fully-integrated, standalone flue gas oxygen analysers. The user interface is mounted onto the probe, lowering installation ...
-
Manufactured by Setnagbased in FRANCE
Measurement of oxygen in combustion gases (specially dedicated to natural gas ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The WDG 1200/integral electronics Insitu and the WDG 1210/remote electronics Insitu are rugged, reliable flue gas analyzers that use trusted zirconium oxide sensor technology for net oxygen (O2) measurements. The unique sensor design allows the entire sensor assembly, including the heater, to be removed without disturbing the outer protection tube which remains in the process. This makes field ...
-
Manufactured by AMETEKbased in USA
Combustion gas measurements for NOx efficiency and product quality are especially challenging in the glass container manufacturing process. Two types of gas-fired furnaces exist that require post and pre combustion gas analysis. The glass furnace or 'melt-tank' is fired by conventional burners that mix pre-heated air and fuel in the burner nozzle. Ambient air leakage in the heat re-cooperation ...
-
Manufactured by AMETEK MOCONbased in USA
The OpTech - O2 Model P is a simple yet effective tool for any laboratory with the need to measure oxygen inside a closed package or container. The OpTech gives the user the ability to measure the oxygen in a non-invasive manner through a transparent foil – making it perfect for shelf life determination of oxygen sensitive ...
-
Manufactured by Setnagbased in FRANCE
MEASUREMENT OF OXYGEN IN COMBUSTION GASES AND IN INCINERATION GASES. QAL1 COMPLIANT (EN14181). ADVANTAGES: No need for reference gas: use of the MicroPoas. Maximum gas temperature: up to 1300° C continuously, depending on the version. No sensitive parts and no hot spot inside the duct. Free circulation of the gases you analyse. 'Detachable' probe tubes: easy to dismantle and replace for ...
-
Manufactured by Unisearch Associates Inc.based in CANADA
Compact and durable, this portable gas measurement equipment allows the user to move easily from one location to the next in order to analyze gas emissions in a variety of environments. Onboard memory allows to save data which can then be loaded into a computer for analysis. ...
-
Manufactured by Setnagbased in FRANCE
Can withstand corrosive chemicals and high moisture rate. Limited maintenance requirements, owing to the laser diode with automatic drift control. 2 versions available: for safe areas and for Ex Proof ...
-
Manufactured by AMETEKbased in USA
Modern gas, oil and coal fired boiler operations require dependable, low-maintanence, application flexible devices to monitor and control combustion processes. The measurement of excess oxygen in flue gas is particularly important for obtaining maximum combustion fuel efficiency while minimizing thermal or fuel-bound Nitrogen oxides generation. The zirconium oxide insitu probe has become the ...
-
Manufactured by Industrial Physics Product Integrity Limitedbased in UNITED KINGDOM
Intrinsically safe ATEX-approved EC91 is an unsurpassed oxygen analyzer for all hazardous areas. The EC91 intrinsically safe oxygen analyzer is an online transmitter for ppm and percent oxygen measurements of gas streams in hazardous area installations. It can detect oxygen levels from as low as 1 ppm up to higher percent levels and can be used in most industrial gases and atmospheres. There is ...
-
Manufactured by Industrial Physics Product Integrity Limitedbased in UNITED KINGDOM
The ultimate solution for fast and reliable oxygen permeation testing of multiple bottles, packages or films. The 8700 with fixed platens is ideal for rapid permeation testing of multiple bottles in PET bottle manufacturing and as an invaluable R&D resource in laboratories for development work to test and validate new packages. In addition, this analyzer can be used for Quality Control, to ...
-
Manufactured by Industrial Physics Product Integrity Limitedbased in UNITED KINGDOM
The 8501 offers a cost-effective solution for accurate, reliable measurement of oxygen transmission rate (OTR) through permeable films. Laboratory quality analysis of packaging film barriers in a simple to use benchtop system. This precision oxygen permeation analyzer combines trace oxygen sensitivity, dependability and exceptional ease of use in a compact, single ...
-
Manufactured by AGC Instruments Ltd.based in IRELAND
To measure % Oxygen (O) in Welding Gas Applications. Lightweight and portable handheld analyser that gives a fast and accurate Oxygen (O) sample measurement in the welding zone where typically Argon has been used to purge oxygen levels. With one touch of a button, the Veri-GAS O atmosphere for oxygen levels by placing the sample probe in the weld zone. Once the correct level of oxygen is ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
WDG-HPII Series analyzers offer unique chimney-effect/convective sampling technology that combines the advantages of insitu probe high-particulate sampling with the high temperature and corrosion resistance of extractive analyzers. With a high-particulate filter and weatherproof sensor enclosure, the analyzer is ideal for measurements of O2, combustibles and methane, and is completely field ...
-
Manufactured by Edgetech Instruments, Inc.based in USA
4-20 mA Loop Powered Two Wire Oxygen Transmitter; The Edgetech Instruments Model OxyTrans is an easy to use, accurate and economical way to measure Oxygen at trace and % levels. A simple display and one point calibration allows for a quick start of the instrument. Measuring Range ; The unit will offer ranges between 0-100ppm, 0-1,000ppm, 0-10,000ppm of oxygen. 0-1% to 0-25% ...
-
Manufactured by Cambridge Sensotec Limitedbased in UNITED KINGDOM
The Rapidox 2100 is a high-performance oxygen (O2) analyser fitted with a rugged long-life zirconia sensor on a remote cable, together with a type K thermocouple sensor; allowing direct in-process measurement of oxygen and temperature in the sample gas. The sensors provide fast and accurate analysis over the low ppm oxygen range in harsh environments up to 650°C. Zirconia oxygen sensors are ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you