Oxygen Sensors Applications available in Bhutan
-
Premium
Energy Savings Solutions for Oxygen Industry
Measure and monitor your oxygen flow, pressure, temperature, and dew point, with VPInstruments oxygen sensors. Get insight into your oxygen consumption and optimize your system, monitor your consumption and allocate flow over your distribution network. VPInstruments’ sensors for oxygen are highly reliable and easy-to-use. We help manufacturers of oxygen generators, technical gas suppliers, oxygen infrastructure (piping, installation) companies, and end customers to respond to current increased ...
By VPInstruments based in Delft, NETHERLANDS.
-
Optical pH, oxygen and temperature sensor solutions for 2D and 3D cell culture sector
Oxygen and pH are key analytes in the wide field of life sciences, for example biotechnology, cell biology or toxicology. PyroScience offers outstanding solutions for oxygen and pH sensing in a variety of applications such as 2D and 3D cell culture, tissue engineering and Organ-on-a-Chip ...
By PyroScience GmbH based in Aachen, GERMANY.
-
Gas Mixing Systems for Gas Sensor Calibration and Development
Gas Sensors are generally calibrated using a 2-point or less than 5-point technique. Manufacturers are required to use expensive sensors to meet the growing accuracy demands of the industry. With Fusion Flow Technology’s solution, Gas Sensors can now be developed using a multi-point (even 10,000 if needed) calibration method. The ability to use a large amount of data minimizes costs and increases ...
By Fusion Flow Technologies a division of Alicat Scientific based in Tucson, ARIZONA (USA).
-
Gas Detection Solutions for Sour Gas
The sour (H2S) content of hydrocarbon fields worldwide is increasing, and many natural gas fields have very high H2S – sometimes in excess of 50%. H2S is extremely dangerous because, although people can smell it at low levels (about 5 ppb) it does not smell much worse at the exposure limit value of 10 ppm or at potentially fatal levels in excess of 100 ppm. Therefore smell is an unreliable means of determining dangerous levels. Existing H2S point sensors are maintenance intensive, slow to respond and provide ...
By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).
-
Gas measurement for the pulp & paper industry
The Kurz Insertion Mass Flow Meter products provide extremely reliable and accurate measurements for the harsh environment of a recovery boiler facility, without restricting airflow even in short run ...
By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).
-
Innovative gas measurement solutions for petrochemical industry
Safely storing liquids and chemicals is a continuous and ongoing effort in the Petrochemical Industry. Companies operating in this industry must deal with some of the unwanted effects that oxygen creates when present inside storage containers. Through a process called nitrogen blanketing, they inject this inert gas into the vapor space and effectively lower the concentration of oxygen. This in turns decreases the risk of fire, explosion, evaporation and structural ...
By Advanced Micro Instruments, Inc. (AMI) based in Costa Mesa, CALIFORNIA (USA).
-
Gas detection & hazardous gas monitoring equipments for waste water treatment
Growing environmental concerns have resulted in the construction and upgrading of waste water treatment plants throughout North ...
By Armstrong Monitoring Corporation (AMC) based in Ottawa, ONTARIO (CANADA).
-
Optical pH, oxygen and temperature sensor solutions for microfluidics sector
PyroScience offers special oxygen nanoprobes for applications in microfluidics. These nanoparticles incorporate our REDFLASH indicator which responds to the oxygen partial pressure inside the chip. Additionally, it is possible to use sensor spots for oxygen, pH and temperature measurements and integrate this sensor spots into the microfluidic chip. With our PICO-O2 read-out device it is possible to measure oxygen of even tiny spots ...
By PyroScience GmbH based in Aachen, GERMANY.
-
Innovative gas measurement solutions for aerospace industry
The aerospace industry uses some of the most advanced technologies in the world in their turbines and engines. Because these turbines and engines are expected to operate and perform at the highest levels, companies in the aerospace industry employ special crews to perform regularly scheduled service and maintenance. But before any work can begin, the crew members must carry out a process called nitrogen flushing to effectively bring the concentration of oxygen in the air down to a safe level. This significantly ...
By Advanced Micro Instruments, Inc. (AMI) based in Costa Mesa, CALIFORNIA (USA).
-
Optical pH, oxygen and temperature sensor solutions for underwater sector
The new, compact and ease-to-operate AquapHOx platform is a flexible solution for many applications. Besides stand-alone loggers with internal data storage for long term deployment, we also developed transmitters for fast sampling and easy integration into consisting set-ups utilizing the integrated analog outputs. The logger and transmitter are available with a titanium housing for deep-sea applications up to 4000m. These devices are highly flexible concerning choice of analyte and sensor format as O2, pH and ...
By PyroScience GmbH based in Aachen, GERMANY.
-
Gas Detection Solutions for Gold Refining
Hydrogen Cyanide (HCN) is a highly toxic compound that is a byproduct of many industrial processes. Existing HCN point sensors are maintenance intensive, slow to respond and provide limited coverage. Many HCN sensors do not work reliably in hot or cold weather, or in humid environments. Our technology can be used for fixed monitoring applications or for temporary protection of workers during construction ...
By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).
-
Innovative gas measurement solutions for electronics industry
Incredible advances in micro-miniaturization of electronic components, integrated circuits and microprocessors have benefited our world and will continue to produce new solutions and conveniences. These advances have resulted in extraordinary innovations, such as very powerful, compact computers, cell phones and various telecommunications devices. And these devices, though inconceivable just a few decades ago, are now common place ...
By Advanced Micro Instruments, Inc. (AMI) based in Costa Mesa, CALIFORNIA (USA).
-
Industrial monitoring solutions for the gas analysers areas
Most large coal fired power plants and combustion processes are required to monitor CO, NO and NO2 (NOx), SO2 and possibly CO2; in addition the analyser has to be normalised to Standard conditions. For this application CODEL offers the five channel GCEM 40 series which uses Infrared absorption to measure these gases plus moisture, pressure and temperature. The analyser can be configured for single channel operation to monitor any of these gases plus CH4 and ...
By Codel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM.
-
Water Quality Sensors for Pollution Control
The World Health Organization states that “past experience has shown that remedial actions to clean up polluted sites and water bodies are generally much more expensive than applying measures to prevent pollution from occurring.” While government policies and regulations are the most cost-effective means of preventing water pollution before it occurs, water quality sensors are needed to enforce these policies and catch pollution before it causes significant harm to the environment. To do that, a ...
By pHionics Inc. based in Carson City, NEVADA (USA).
-
Electrical Based Tomography Systems for Slurry Flow
Slurry transportation is required in a diverse range of sectors, from food to minerals processing; and oil sands processing to nuclear waste management. As a process it requires significant levels of energy and the abrasive nature of materials used can lead to ongoing issues of pipeline ...
By Industrial Tomography Systems Ltd. (ITS) based in Manchester, UNITED KINGDOM.
-
Measuring the ocean surface solutions for oil & gas industry
Miros has spent 35 years equipping the world’s oil and gas giants with real-time weather and sea state monitoring solutions. Our dry, cutting-edge radar-based technology significantly reduces “waiting on weather”, widens weather windows, and enhances the safety of ...
By Miros AS based in Asker, NORWAY.
-
Time-resolved Spectroscopy of Phosphorescent Oxygen Sensors in a Relevant in vitro Environment for Biomedical Applications
This customer written application note details how researchers from the Air Force Research Laboratory have outfitted an Edinburgh Instruments FLS1000 Photoluminescence Spectrometer to assess candidate dissolved oxygen sensors. Available: ...
By Edinburgh Instruments - TECHCOMP Group based in UNITED KINGDOM.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you