Ozone Analyzers Equipment For Monitoring And Testing Available In Swaziland
-
ShowcaseManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Easy handling and individual customizations. With the analyser EasyCEM gases can be measured such as CO, CO2, NO, SO2, SF6, THC with the NDIR method or with PID , as welll as gases like NH3, HCl and CH4 with a TDLS (tunabel diode laser). By extending further modules with NDUV or electrochemical measuring principles, it is possible to measure gases like O2, O3 or NO2. The analyser is particularly ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Since ozone is a very unstable gas, an ozone generator continuously producing ozone span gas is needed to calibrate ozone analyzers. This apparatus can be calibrated only to a limited extent because the ozone generator is controlled by the intensity of the UV ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
AM-5401 portable ozone analyzer adopts the principle of untraviolet spectrohotometry and combines with advanced micro-processing technology to provide accurate and reliable low-concentration O3 detection of "ppb-ppm" level, which meets application requirements of atmospferic ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
Ozone analyzer adopts ultraviolet spectrometry principle and combines with advanced microprocessor technology. It provides accurate and reliable detection of O3 at ppb~ppm level to meet the requirement of ambient gas monitoring. UV adsorption Ozone analyzer is developed based on Beer-Lambert technology. It is applied to monitor low concentration O3 in ambient air. ...
-
PremiumManufactured by ERGAbased in TURKEY
Triboelectrostatic drum separator for dry separation of nonconductors with different charge ...
-
PremiumManufactured by ERGAbased in TURKEY
Electrostatic corona drum separator for separation of materials with different electrical ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multipoint multigas calibrator SONIMIX 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, NOx and O3. With the optional Ozone generator and GPT circuitry it is possible to verify the coherence of NO, NO2 and O3 analysers, and to determine the converter’s efficiency ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Lenntech offers a range of ozone measuring modules. The range covers ambient ozone measurement, high concentration ozone measurement and dissolved ozone analysers. The advantage of these compact ozone analysers is that at low cost the area around the ozone generator is continuously controlled against any ozone leakage and ozone concentrations. More expensive UV based ozone monitors are also in ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Ozone precursors measurement in the ambient air. Synspec GC 955 series 611/811 is a combination of two gas analysers for online continuous monitoring of ozone precursors in the ambient air. GC 955 811 is specifically designed for the measurement of the hydrocarbons from C2 up to C5 and the model 611 for the hydrocarbons from C6 up to C12. With the combination of these two GCs nearly all of the ...
-
PremiumManufactured by ENVEAbased in FRANCE
LED based, UV Photometric Ozone Analyzer providing accurate, stable and repeatable O3 measurements in the range of 0-500 ppb or 0-10 ppm. Eco-designed, reference air quality monitor using LED based UV Photometry technology (patented). QAL1 certified by the TUV, US-EPA ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 4001 is a stand alone ozone primary transfer standard able to generate ozone together with dry or wet air (optional) allowing to calibrate the ozone monitors in several points. It generates an outflow of 3 Nl/min air containing 10 to 1000 ppb O3, with stability and reproducibility of the concentration better than 1% relative. The extended range model generates 10 ppb to 10 ppm at 3 ...
-
PremiumManufactured by ENVEAbased in FRANCE
LED based, UV Photometric Ozone Analyzer providing accurate, stable and repeatable O3 measurements in the range of 0-500 ppb or 0-10 ppm. Eco-designed, reference air quality monitor using patented technology. QAL1 certified by the TUV, US-EPA ...
-
PremiumManufactured by ENVEAbased in FRANCE
Dedicated to the measurement of regulated pollutants such as ozone (O3), carbon monoxide (CO), sulfur dioxide (SO2), nitrogen oxides (NO- NO2 and NOx), and particulates PM10 and PM2.5, the e-Series of analysers, has been designed with a special consideration to the environmental impacts of the product during its whole ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
With CraNOx II, ECO PHYSICS is launching the second generation of its high-end measurement solution in the ppb and ppt range. The new system is smaller and more sophisticated, as it now has the power to calculate the photostatic equilibrium by means of the integrated ozone analyzer. The CraNOx II system is capable of simultaneously measuring NO, NO? and NO2. Furthermore, it can be expanded to ...
-
Manufactured by Teledyne APIbased in USA
The Model T265 is the only commercially available US EPA Federal Reference Method for Ambient Ozone Monitoring according to the latest US EPA regulatory rules for O3. The instrument uses Chemiluminescence with Nitric Oxide (NO) as a reagent, making it safe, stable, and effective for all applications. The NO-CL method for Ozone has several advantages over the conventional UV absorption technology, ...
-
Manufactured by Foxcroft Equipment & Service Co. Inc.based in USA
The Foxcroft FX-CL-O amperometric reagentless dissolved Ozone analyzer provides continuous online measurements in drinking water disinfection, food processing, bottling operations, and clean in place (CIP) processes containing chemicals and detergents. ...
-
Manufactured by Everise Technology Ltd.based in CHINA
O3 analyzer is of high sensitivity and stability, with low detection limit at 2ppb. Controlled by microprocessor, there is compensation for the UV energy, temperature and ...
-
Manufactured by Teledyne APIbased in USA
The Model 470 is a state-of-the-art Dissolved Ozone Sensor designed for semiconductor Wet Bench tools and many other industrial processes. It provides continuous measurement of dissolved ozone in deionized water or sulfuric baths with concentrations above 150 mg/L. The Model 470 is “clean-ready” for high purity semiconductor processes, and is designed to be simply spliced in-line in ...
-
Manufactured by Spectrex Corporationbased in USA
The model UV-100 ozone analyzer is for general purpose measurement of ozone in air. Its range is .01-900 ppm (v) with 2% accuracy, and it includes a built-in data logger. The UV-100 weighs only 2.1 kg (4.7 lb), it is powered by an AC adapter or 12 V external battery, and is equally versatile for the laboratory or for process monitoring. The outputs are digital display, 0-2.5 VDC and 4-20 mA. The ...
-
Manufactured by Sabio Environmentalbased in USA
The Model 6030 Ozone Primary Standard is NIST traceable and provides an accurate and convenient means of measuring low levels of ozone in ambient air. Using the Beer-Lambert law, ozone is measured in a single photometric cell by detecting the absorption of ultraviolet (UV) radiation from ozone molecules at a wavelength of 254 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you