ambient ozone monitoring Equipment available in Mississippi

Available in Mississippi| Near Mississippi
43 Results found

We couldn't find any ambient ozone monitoring equipment in Mississippi

Here is a list of results available in Mississippi

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Ozone Monitoring ×

  • Keyword: ambient ozone monitoring ×

  • Available in: USA ×

  • Available in: Mississippi ×

HORIBA - Model APOA-370 - Ambient Ozone Monitor

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

The APOA-370 continuously monitors atmospheric ozone concentrations using a cross flow modulated ultraviolet absorption method. The APOA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry method, due to its minimal maintenance requirements and capability of ...

Ambient Ozone Monitor

by Ozone Water Systems, Inc.     based in Phoenix, ARIZONA (USA)

The OWS Ambient Ozone Monitor is not an ordinary ozone monitor that only analyzes ambient ozone concentrations of the surrounding atmosphere. It has many advantages, but the most important is that it works as a safety device - not just an analytical device.

TAPI - Model T265 - Chemiluminescence O3 Analyzer

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The innovative T265 is an ultra-high precision ozone analyzer, based on the chemiluminescence of ozone combined with nitric oxide (NO). The T265 is safe, stable, and virtually free from interferences. It is ideal in applications where the photometric method may have false-positive indications from fine particulates, Hg, turpines, ClO2, and VOCs. ...

TAPI - Model T400 - UV Absorption O3 Analyzer

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T400 UV Absorption analyzer uses a system based on the Beer-Lambert law for measuring low ranges of ozone in ambient air.

TAPI - Model 465M - Process Ozone Monitor

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model 465M is a microprocessor based medium range ozone monitor for measuring process ozone concentrations in water treatment, food processing, and research applications. The design has been specifically optimized for applications requiring the measurement of ozone at near-ambient pressure such as water treatment contactor off-gas measurement. ...

HORIBA - Model CC-100E - Converter Checker

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

HORIBA Europe’s NOx Converter Checker CC-100E has been developed to test the efficiency of NOx to NO converters, which are used in NOx gas analyzers for stack emission measurements or process gas analysis.

Ozone Monitor - Model 205 Series - Dual Beam - EPA Federal Equivalent Method (FEM)

by 2B Technologies     based in Boulder, COLORADO (USA)

The Model 205 Ozone Monitor makes use of two detection cells to improve precision, baseline stability and response time.  In the Dual Beam instrument, UV light intensity measurements Io (ozone-scrubbed air) and I (unscrubbed air) are made simultaneously. Combined with other improvements, this made it possible to reduce the time between ozone ...

Ozone Monitor - Model 202 Series - EPA Federal Equivalent Method (FEM)

by 2B Technologies     based in Boulder, COLORADO (USA)

The 2B Technologies Model 202 Ozone Monitor is designed to enable accurate and precise measurements of ozone ranging from low ppb (precision of ~1 ppb) up to 100,000 ppb (0-100 ppm) based on the well established technique of absorption of UV light at 254 nm.

Lenntech - Ozone Measurement

by Lenntech Water Treatment     based in Delft, NETHERLANDS

Lenntech offers a range of ozone measuring modules. The range covers ambient ozone measurement, high concentration ozone measurement and dissolved ozone analysers. The advantage of these compact ozone analysers is that at low cost the area around the ozone generator is continuously controlled against any ozone leakage and ozone concentrations. ...

TAPI - Model 430 - Compact Ozone (O3) Analyzer

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

Teledyne API, the market leader for ambient ozone (O3) measurements, is pleased to introduce the Model 430 O3 Analyzer with US EPA approval and certification. The Model 430 is a compact analyzer that uses the proven UV Absorption principle. The small footprint and robust design make it ideal for a variety of applications including, but not limited ...

Model 211 Series - Scrubberless Ozone Monitor

by 2B Technologies     based in Boulder, COLORADO (USA)

The new Model 212 Scrubberless Ozone Monitor uses the proven ultraviolet (UV) absorption method with an innovative gas-phase scrubber technology to measure ozone virtually free from interferences. In the reference mode, the instrument uses the reaction between ozone and nitric oxide (NO) to selectively remove ozone from the sample. This reaction ...

Environnement S.A. - Model O342M - UV Absorption Ozone Analyzer

by Environnement S.A     based in Poissy, FRANCE

Provides accurate O3 low level monitoring measurements in the range of 0-10 ppm. Ultra compact and lightweight – rackable 19'/3U. UV absorption technology. SMD enhanced electronics. Compliance with ISO 13964 and EN 14625. NEW: Built-in serial interface (RS 232 / RS 422), USB & TCP/IP connectivity. NEW: on board web server compatible with ...

BMT - Model 932 C - Ozone Monitors

by BMT Messtechnik GmbH     based in Stahnsdorf, GERMANY

Low Concentration Ambient Ozone Monitor, 1, 3, 6 channels, temperature/pressure compensation, ranges: 1, 2, 5, 10, 20, 50, 100, 250ppmv, alpha-numeric display, low and high alarm thresholds configurable for each channel, three configurable EMO outputs, splash proof aluminum cabinet, cTUVus certified

Model OEM-106 Series - Ozone Monitor on a Board

by 2B Technologies     based in Boulder, COLORADO (USA)

For those who need to integrate their ozone monitor into a separate system such as an air pollution monitoring package, we offer the Model OEM-106 series where the entire ozone monitor is mounted on a single printed circuit board.  The liquid crystal display and power switch may be detached and mounted outside the customer's custom ...

BMT - Model 932 - Ozone Monitors

by BMT Messtechnik GmbH     based in Stahnsdorf, GERMANY

The OZONE MONITOR BMT 932 is a state-of-the-art UV photometer for measuring and monitoring ozone content of theambient air.The instrument may be ordered with 1, 3, or 6 sample channels. Switching from channel to channel is automatic, or manual via push button.Low Concentration Ambient Ozone Monitor, 19″ rack mount, 1, 3, 6 channels, ...

Sabio - Model 2030 - Portable Ozone Photometer Audit Transfer Standard

by Sabio Instruments, a division of Sutron Corporation     based in Georgetown, TEXAS (USA)

The Model 2030 is a portable Ozone Photometer audit transfer standard that is ideal for calibrating ambient air monitoring ozone analyzers and ozone generators. Using Beer-Lambert's Law, the Ozone photometer measures the amount of UV light attenuated at 254nm across a sample path. The unit alternates the ozone sample with a sample that has the ...

SIMULATOR - Model AOS 1 - Ozone Monitors

by BMT Messtechnik GmbH     based in Stahnsdorf, GERMANY

The BMT AMBIENT OZONE SIMULATOR AOS 1 is a simple means to comparing two ambient ozone monitors with each other.AMBIENT OZONE SIMULATOR AOS 1 for comparing two BMT Ozone Monitors Ozone source for comparing two BMT Ozone Monitors (constant air flow 2 l/min), ozone content adjustable 0 to 0.75 ppmv, or 0 to 1.5 ppmv

Model POM Series - Personal Ozone Monitor

by 2B Technologies     based in Boulder, COLORADO (USA)

2B Tech has taken the next step in miniaturization of UV-based ozone monitors by developing the Personal Ozone Monitor or 'POM'. The POM has dimensions of 4 x 3 x 1.5 inches and weighs only 0.75 lb (340 g). It has a built in GPS so that ozone measurements may be logged continuously along with geographic location. By folding the optical path in the ...

Ecotech - Model Serinus 10 - Ozone Analyzer

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The Serinus 10 Ozone (O3) analyser delivers precise and reliable performance at excellent value. It uses proven non-dispersive ultraviolet (UV) absorption technology to measure O3 in ambient air (LDL 0.5 ppb, range 0-20 ppm).

Model 306 Series - Ozone Calibration Source

by 2B Technologies     based in Boulder, COLORADO (USA)

The 2B Technologies Model 306 Ozone Calibration Source is a portable source of ozone that allows you to calibrate any ozone monitor - not just those manufactured by 2B Tech. The instrument scrubs ozone from ambient air and produces any mixing ratio of ozone in the range 30 to1,000 ppbv. The desired ozone concentration is chosen from the ...

Related Terms for ambient ozone monitoring

Need help finding the right suppliers?

Let the XPRTs do the work for you