Ozone (O3) Monitoring Equipment For Monitoring And Testing Available In Lithuania
-
ShowcaseManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Easy handling and individual customizations. With the analyser EasyCEM gases can be measured such as CO, CO2, NO, SO2, SF6, THC with the NDIR method or with PID , as welll as gases like NH3, HCl and CH4 with a TDLS (tunabel diode laser). By extending further modules with NDUV or electrochemical measuring principles, it is possible to measure gases like O2, O3 or NO2. The analyser is particularly ...
-
Premiumbased in USA
The FEM-capable Ozone Module helps you confirm ozone attainment. The Clarity Ozone Module is based on best-in-class technology from 2B Technologies, and provides accurate measurements of ozone in air over a wide dynamic range extending from a few parts-per-billion by volume (ppb) to an upper limit of 100 parts-per-million (ppm) based on the well-established technique of absorption of ultraviolet ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
AM-5401 portable ozone analyzer adopts the principle of untraviolet spectrohotometry and combines with advanced micro-processing technology to provide accurate and reliable low-concentration O3 detection of "ppb-ppm" level, which meets application requirements of atmospferic ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 6123 is the ideal system for those looking for a standard for ozone monitoring and reporting programs who do not need to measure external ozone sources. Units consists of a single chassis supporting a thermal mass flow controllers, an ozone generation module, photometer, static mixer and control electronics. Like the Series 6103, the Series 6123 may also be ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The dynamic calibrator is based on the microprocessor technology and the multi-channel gas calibration equipment developed specifically for precise gas analyzer. Adopting the high precision quality flow controller and standard gas, the calibration standard gas is provided for the zero and span test of multiple gas parameters, which can provide four air sources simultaneously. The dynamic ...
-
PremiumManufactured by ENVEAbased in FRANCE
LED based, UV Photometric Ozone Analyzer providing accurate, stable and repeatable O3 measurements in the range of 0-500 ppb or 0-10 ppm. Eco-designed, reference air quality monitor using LED based UV Photometry technology (patented). QAL1 certified by the TUV, US-EPA ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
The OG-3 ozone source calibrator is for calibration verification and simple approximate calibration of ozone instruments. It’s available in either 2 outputs: .1 ppm or 1 ppm. The OG-3 is powered by an AC adapter supplying 12 VDC. The OG-3 uses a precision quartz UV lamp ozone generator. Its output is adjusted in a laboratory by comparison with a NIST traceable ...
-
PremiumManufactured by Absolute Ozone®based in CANADA
Absolute Ozone® Generators are a quantum leap in Ozone technology. Due to specific elegant design, utilizing Microfluidic platform technology, and excellent durability, all air-Cooled Absolute Ozone® generators reliably provide ultra-pure, highly concentrated ozone for a wide variety of special applications. The performance is unequaled in the industry, with the capability of reliably ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 6100 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, O3, hydrocarbons and other gases of interest. The system consists of a single chassis supporting up to three (3) thermal mass flow controllers, an ozone generation module, a mixing zone, a reaction chamber for gas phase titration and control electronics. The instrument ...
-
PremiumManufactured by Absolute Ozone®based in CANADA
Absolute Ozone® Generators are a quantum leap in Ozone technology. Due to specific elegant design, utilizing Microfluidic platform technology, and excellent durability, all air-Cooled Absolute Ozone® generators reliably provide ultra-pure, highly concentrated ozone for a wide variety of special applications. The performance is unequaled in the industry, with the capability of reliably ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 6103 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, O3, hydrocarbons and other gases of interest. The system consists of a single chassis supporting up to three (3) thermal mass flow controllers, an ozone generation module, photometer, glass output manifold, mixing chamber, a reaction chamber for gas phase titration and ...
-
PremiumManufactured by ENVEAbased in FRANCE
Dedicated to the measurement of regulated pollutants such as ozone (O3), carbon monoxide (CO), sulfur dioxide (SO2), nitrogen oxides (NO- NO2 and NOx), and particulates PM10 and PM2.5, the e-Series of analysers, has been designed with a special consideration to the environmental impacts of the product during its whole ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS OC500 ozone calibrator is used to calibrate OPSIS Air Quality Monitoring stations. The calibrator generates a well defined ozone concentration which could be preset by the user. It is designed to generate very high ozone concentrations, sufficient for performing accuracy audit and precision ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 4001 is a stand alone ozone primary transfer standard able to generate ozone together with dry or wet air (optional) allowing to calibrate the ozone monitors in several points. It generates an outflow of 3 Nl/min air containing 10 to 1000 ppb O3, with stability and reproducibility of the concentration better than 1% relative. The extended range model generates 10 ppb to 10 ppm at 3 ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 6113 is the ideal system for those looking for a standard for ozone monitoring and reporting programs who need the ability to measure external ozone sources. Units consists of a single chassis supporting a thermal mass flow controllers, an ozone generation module, photometer, static mixer and control electronics. Like the Series 6103, the Series 6113 may also be ...
-
PremiumManufactured by Environics, Inc.based in USA
The Series 6100 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, hydrocarbons and more. Custom options can be selected for calibration of ammonia, HCl and a variety of other gases of interest. The S6100 is a great option for dilutions from ppm or lower level cylinders. The S6100 can now be ordered or retrofit to run on a 24V power source so you can ...
-
PremiumManufactured by Absolute Ozone®based in CANADA
Real-time detecting environment ozone gas temperature & humidity detection. Wall mount with LCD display. Provide one on/off-dry contact relay output to control an ozone generator or a fan. Provide an analog output with a linear over full range output. Provide RS485 interface to PC or other DDC. Strong function - High performance - Low ...
-
PremiumManufactured by Absolute Ozone®based in CANADA
Absolute Ozone Generators are a quantum leap in Ozone technology. Due to specific elegant design, utilizing Microfluidic platform technology, and excellent durability, all air-Cooled Absolute Ozone® generators reliably provide ultra-pure, highly concentrated ozone for a wide variety of special applications. The performance is unequaled in the industry, with the capability of reliably ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
DO3 is a rapid and simple to use device for checking the ozone concentration in water. It is calibrated in mg/L (same as parts-per-million by volume in water). This small battery-operated detector offers an inexpensive alternative to more costly inline monitors and requires no disposable reagents. DO3 is a practical, versatile detector for applications where the user needs to confirm that a ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
The RAP-2 Remote Alarm Panel is for alarming when signals from ozone and VOC monitors reach preset limits or set-points. The alarms are a red strobe light and a loud audible alarm. The RAP-2 also outputs its input signal in 4-20 mA form for building automation systems and other applications requiring long signal paths. The RAP-2 is powered by 14-30 VAC or DC. This remote alarm panel is usually ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you