Only show results available in Connecticut? Ok

Particle Analysis Applications

  • Premium

    Chemical oxygen demand (COD) analyzer for government and academic solutions

    PeCOD® is the only Chemical Oxygen Demand (COD) analysis technology to use the powerful UV-activated nanoparticle TiO2 (titanium dioxide) photocatalyst which is at the core of the system. The high electrochemical potential of the TiO2 gives it a substantial advantage over the modest chemical potential generated by the dichromate method. The UV light creates a photohole in the TiO2 sensor with a very high oxidizing power and organics in the cell are oxidized. PeCOD® is extremely accurate across a broader...

    By MANTECH Inc. based in Guelph, ONTARIO (CANADA).

  • Premium

    Particle measurement and sampling equipment for Inhalation aerosol measurements

    Dekati Solutions for inhalation aerosol research include real-time particle net charge and bipolar charge measurement instruments. Dekati BOLAR™ is the only commercially available instrument that can detect both positive and negative charge levels of different sized particles in real-time. This electrical charge carried by inhalation aerosols has been found to have effect on device performance and lung deposition of Dry Power Inhalers (DPI), Metered Dose Inhalers (MDI) and nebulizers. Measuring and optimizing...

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Premium

    Particle measurement and sampling equipment for Non-Exhaust vehicle emissions

    As exhaust emissions from engine tailpipe have been decreasing in recent years through development of engines and exhaust after-treatment systems, non-exhaust emissions have become a major contributor to total particle emissions from vehicles. Dekati provides complete measurement solutions for brake wear and blow-by gas emission measurements and we can cover the complete particle size using only one measurement method – 6 nm – 10 µm with one measurement method.

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Premium

    Flow measurement instrumentation for emissions & analytical solutions

    Sierra manufacturers the BG3 Elite Partial Flow Dilution system for use in diesel particulate sampling. BG3 Elite is a direct replacement to cumbersome full flow CVS systems in both heavy and light duty emissions applications. The BG3 Elite can feed properly conditioned diluted sample flow to a Bag Mini-Diluter for gaseous analysis or even to a Particle Number measurement device.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Machine condition monitoring for aviation, aerospace & airlines

    Overview Oil analysis has long been practiced for aircraft engines and other airborne oil-wetted systems such as hydraulic systems and gear boxes in helicopters. Military organizations are perhaps the number one users of oil analysis testing and commercial aviation also has a long history of oil analysis. A number of airlines throughout the world do their own oil analysis, but in many cases they send samples to commercial oil laboratories. Engine manufacturers also do oil analysis as part of engine development...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Machine condition monitoring for labs & services

    Overview Machine condition monitoring using oil analysis is widely practiced by virtually every segment of modern industry that maintains large, expensive, oil-lubricated machines. In many cases, especially in smaller plants or enterprises, samples are sent to commercial oil analysis laboratories that can help monitor machinery health.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Particle Size Measurement

    Particle size is a geometric characteristic that is usually assigned to material objects with sizes ranging from nanometers to millimeters. There is a wide variety of real systems that contain particles within this size range. These systems are generally polydisperse, meaning that the particles in a particular sample vary in size. Therefore, in order to adequately characterize such systems, it is not sufficient to simply determine a single particle size. We must instead determine the system’s particle size...

    By Dispersion Technology Inc. based in Bedford Hills, NEW YORK (USA).

  • Real-time solutions for microbial industrial automation and monitoring applications

    VBact platform technology offers higher operational flexibility, better monitoring and validation which results in prevention of losses and improved yields.

    By VBact Ltd. based in Rehovot, ISRAEL.

  • Instrumentation technologies for refineries

    The petroleum refining industry uses a wide range of processes, from separation, petroleum conversion, and petroleum treatment to waste water management. Each of these processes has its own challenges and all are made more complex by the variety of products and contaminants in the process. Two key areas, from the water management perspective, are cooling water and waste water treatment.

    By Advanced Sensors Ltd. - part of PAC L.P. based in Carrickfergus, UNITED KINGDOM.

  • Independent particle characterization services for dietary supplements

    Concurrent with the U.S. Food and Drug Administration’s final rule establishing regulations to require current good manufacturing practices (cGMPs) for dietary supplements, PTL can offer cGMP services to all supplement manufacturers. PTL has sustained its FDA registration since 1994, which involves rigorous inspections by FDA every 2 years or sooner. According to the final rule, proper controls must be in place for dietary supplements to be produced in a consistent manner for identity, purity, strength, and...

    By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).

  • Independent particle characterization services for medical devices industries

    Advances in biomedical implant and device technology continue to present new challenges in the area of physical testing. Particle Size Distribution, Surface Area and Porosity measurement data are invaluable to the biomedical researcher. PTL partners with each client to design projects that provide this needed information while controlling the costs of research. Applications have included particle size analysis of wear particles in fluid submitted from implant fatigue studies and pore size analysis of tricalcium...

    By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).

  • Surface Science

    SIMS - for depth profiling, surface composition measurement, and elemental imaging, Hiden's SIMS Workstation provides a complete analytical facility. RGA - The Hiden quadrupole mass spectrometers provide high sensitivity detection capability for the most demanding XHV/UHV vacuum environments. The pulse ion counting detector enables measurement of both positive and negative ions through 7 continuous decades, the integral accumulation mode being used for the capture of discreet particle events. UHV Temperature...

    By Hiden Analytical Ltd. based in Warrington, UNITED KINGDOM.

  • AutoChem - Particle and Droplet Processing

    Optimize Multiphase Processes With In Situ Video and Real-Time Particle and Droplet Measurements. Particles and droplets are everywhere in the chemical, consumer products, pulp and paper, and petroleum industries. Particles grow, agglomerate, break, dissolve, and change shape - all of which can have an impact on process performance and product quality. To be successful, chemists and engineers must understand and optimize particle size distributions to control process efficiency such as stability, separations, or...

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Air Quality Monitoring for the Aerosol Sampling Industry

    MSP’s aerosol instrument products include cascade impactors, virtual-impactor concentrators, personal PM samplers, micro-environmental PM Samplers, condensation particle counters, an asbestos fiber monitor, aerosol generators, electrical ionizers, differential mobility analyzers, laser particle counters and wide range particle spectrometers.

    By MSP Corporation based in Shoreview, MINNESOTA (USA).

  • Portable analytical instruments solutions for lab & field studies sector

    Meet the Z: The world’s premier handheld LIBS (Laser induced breakdown spectroscopy) analyzer featuring the most advanced technology ever created in a handheld elemental analyzer. The Z-300’s spectrometer range covers 190 nm – 850 nm, or optionally out to 930 nm. It offers instant analysis of every element in the Periodic Table, for nearly all materials, anywhere on the planet. The analyzer features pre-configured Apps for specific applications (alloys, geochem, etc.). Or users may create their...

    By SciAps, Inc. based in Woburn, MASSACHUSETTS (USA).

  • Independent particle characterization services for pharmaceutical industries

    Supporting drug development with pharmaceutical testing is some of the most exciting work we do. As a premier cGMP contract service laboratory, PTL partners with pharmaceutical scientists to identify key physical characteristics of pharmaceutical APIs and excipients ranging from powders, solids and liquids. With over a decade of experience testing a vast array of pharmaceutical products, PTL’s analytical staff uses custom-designed test methods for particle size, particle shape, surface area, pore volume, pore...

    By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).

  • Independent particle characterization services for abrasives industries

    Serving the abrasive industry over the last 2 decades, the most common testing performed for this field is particle size and shape analysis. The world of abrasives can encompass a host of varying materials from diamond dust, silicon and tungsten carbide, fused silica and quartz, to polished glass and medical abrasives. particle_size_of_abrasives With sizing instrumentation capable of measuring from a few nanometers up to 2000 microns and classic techniques such as sieving for even larger sizes, PTL has the...

    By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).

  • XRF analysis for lead paint

    Niton analysers facilitate direct surface testing for lead paint, testing for lead in dust wipes from surfaces, testing the lead content of soil in the surrounding area (containment) and the testing of lead content in filters from respirators or volume air samplers for worker/public protection.

    By Niton UK Limited based in Woodmancott, Winchester, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you