Particle Analysis Equipment For Monitoring And Testing Available In Oklahoma
-
PremiumManufactured by Testo, Inc.based in USA
The number of solid fuel burning systems, and the fine particles they emit, has continued to soar over the past years. This, and the amendment of 1. BlmSchV, has presented chimney sweeps, heating engineers, and service technicians with a new and formidable challenge. The testo 380 fine particle analyzer is designed to aid these professionals in performing easy and precise fine particle ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The AirGen series ZA FID Air is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. Very compact, the ZA FID Air can purify up to 30 L/min of compressed Air and can bear a pressure up to 7 bar (101 PSI). The filtration of the hydrocarbons is performed by using a catalytic oven filled with palladium. The reduction of hydrocarbons, including methane, and ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The AirGen series KZA FID Air is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. Very compact, the ZA FID Air can purify up to 15 L/min of compressed Air and can bear a pressure up to 7 bar (101 PSI). The filtration of the hydrocarbons is performed by using a catalytic oven filled with palladium. The reduction of hydrocarbons, including methane, and ...
-
PremiumManufactured by ARC Filtration System Ltdbased in CHINA
MCE flat membranes are made from a mixture of cellulose nitrate and cellulose acetate, which can retain microorganisms and particles from fluids. They are widely used in aqueous solution sterile filtration, aqueous solution clarification, particle collection and analysis, microbial detection, air monitoring, mobile phase (aqueous phase) filtration for HPLC, ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The flexible system with ultimate sensitivity and targeted performance optimization using various accessories for advanced research: Ultimate freedom of optimization through full ion focus control. Shortest dwell time and best mass separation. Flexible connection of accessories using two entry ports to the plasma compartment. ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The BioCapt® Single-Use Microbial Impactor helps minimize false positives for microbial activity in pharmaceutical cleanrooms by reducing contamination from handling of agar plates. This results in a decrease in investigations while increasing productivity. Additionally, many costly and time consuming sterilization steps, such as autoclaving, disinfecting, handling and logistics are ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
FieldLab 58 is a battery-powered, Integrated oil analysis system that provides quick and comprehensive oil analysis in the field. Commercial field service professionals managing fleets of high-value assets require portable, lightweight devices that provide rapid oil analysis results with quality similar to oil analysis labs. Funded by the United States Department of Defense (DoD), then developed ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
MiniLab 53 is a basic on-site oil analysis lab for condition based maintenance for Industrial Machinery. Oil analysis provides early indications of equipment wear and identifies the root causes of corrosion. On-site oil analysis eliminates the wait associated with sending samples off-site and enables immediate decision making. With three simple test, the MiniLab 53 delivers comprehensive on-site ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The robust system for efficient and stable characterization of high matrix samples: Outstanding plasma robustness for high matrices. Minimized drift at changing matrix load. Efficient interference management with outstanding ease of use. ...
-
PremiumManufactured by SIEBTECHNIK GMBHbased in GERMANY
The airjet screen SLS 200 was developed to meet the requirements of modern laboratories for fast, precise and reproducible particle size analysis of all dry materials. The analysis range extends from approx. 20 to 4000 µm. The sample quantity is approx. 500 g, depending on the material density. With the optionally available air preheating, the field of application of the SLS can be extended for ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
LaserNet 200 Series is a contamination and wear debris analyzer that monitors lubricant condition for predictive maintenance. Particle Analyzer: The LaserNet 200 Series allows reliability professionals to quickly and easily assess machinery health in just minutes. By testing only a few milliliters of fluid, users see a complete picture of machine wear and particulate contamination. This enables ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The high sensitivity instrument for routine ultratrace element detection in clean sample matrices: Ultra sensitive and stable performance for best signal-to-noise ratio. High ion transmission with full sensitivity control on complete mass range. Market leading abundance ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The fast system for high-throughput analysis and superior precision for large sample batches: High sensitivity for optimized data acquisition. Universal interference management mode 11 orders dynamic range for full coverage of required concentration ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The HT-DLPI+ (High Temperature Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
Oil analysis provides early indications of equipment wear and identifies the root causes of corrosion. On-site oil analysis eliminates the wait associated with sending samples off-site and enables immediate decision making. With four simple tests, the MiniLab 153 delivers comprehensive on-site oil analysis, providing immediate actionable results, saving time and reducing ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The AirGen series RACK ZA FID is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. Very compact, the RACK ZA FID Air can purify up to 50 L/min of compressed Air and can bear a pressure up to 7 bar (101 PSI). The filtration of the hydrocarbons is performed by using a catalytic oven filled with palladium. The reduction of hydrocarbons, including methane, ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Temperature ELPI+ (Electrical Low Pressure Impactor, HT-ELPI+) is a unique version of the Dekati ELPI+ that enables real-time measurement of particle size distribution from 6 nm up to 10 μm with 10 Hz sampling rate. The High Temperature ELPI+ allows direct measurement of up to 180 °C high temperature aerosol samples without the need to cool the sample, which makes the ...
-
Manufactured by Advanced Sensors Ltd. - part of PAC L.P.based in UNITED KINGDOM
The EX-100M is a side stream oil / particulate in water analyzer that combines video microscopy measurement for particle size analysis with the highly accurate Laser Induced Fluorescence oil content measurement technique. This allows measurement of Total Suspended Solids (TSS), oil droplet size and gas bubble size whilst still accurately measuring concentration of oil in water. In addition to the ...
-
Manufactured by Brookhaven Instruments Corporation (BIC)based in USA
Brookhaven's NanoBrook Omni instrument combines the best technology from our particle/protein sizer and zeta potential analyzer in to one powerful and accurate solution for sizing and zeta potential analysis. Measure samples in nearly every possible suspension environment from high salts such as PBS and sea water to organic solvents and of course aqueous solutions. Particle and protein sizing, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you