Particle Counters Downloads
-
Premium
Chem 20 - Chemical Particle Counter - Operations Manual
This manual gives you the information necessary to successfully unpack, install, operate, and maintain the Chem™ 20 and Chem 20-HI chemical particle counting instruments. The Chem 20 particle counter (also referred to as “particle sensor” or “sensor” throughout this manual) samples high purity process chemicals to monitor the presence of particles. Laser illumination ...
-
Premium
HSLIS e-Series - Particle Counter - Operations Manual
These High Sensitivity Liquid In Situ Monitors (HSLIS) sample DI water or process chemicals to measure the presence of particles. These instruments use laser illumination with a high resolution optical system, collecting particle-scattered light over the range of angles ± 40°. Sizing is accomplished in situ by means of pulse height analysis (PHA) of the scattered light. An HSLIS ...
-
Premium
PMS - Model SLS 1100 - Syringe Sampling System with LiQuilaz II Particle Counter - Datasheet
The SLS Syringe Sampling System is ideal for applications where precise, small-volume sampling is needed. The system consists of a syringe sampler for either corrosive or non-corrosive liquids, a particle counter for different sizing sensitivities, and software. A convenient naming system identifies the particle counter installed inside the instrument. ...
-
Premium
Lasair Pro Aerosol Particle Counter Operations Manual
This confidential document contains proprietary information which is protected by copyright. All rights are reserved. No part of this document may be reproduced, distributed, or transmitted in any form without the prior written consent of Particle Measuring Systems. The information contained in this document is subject to change without ...
-
Premium
IsoAir - Model Pro-Plus - Remote Particle Counter - Datasheet
The IsoAir® Pro-Plus Remote Particle Counter uses the latest technologies to simplify cleanroom monitoring into a simple but powerful package that meets global regulations. Data from the instrument can be incorporated into either Particle Measuring Systems’ FacilityPro® Monitoring System or Facility Net software, with the option of third-party communications via Modbus TCP/IP or ...
-
Premium
HandiLaz - Model Mini II - Handheld Airborne Particle Counter - Operations Manual
The HandiLaz® Mini II Particle Counter is a lightweight, handheld airborne particle counter designed for speedy assessment of microcontamination levels in cleanrooms and other controlled environments. It has a 3.5-inch Color LCD display, a touchscreen and operates with a single button. It is simple to use and maintain, and uses battery or AC power. The Mini II operates at 0.1 CFM with an ...
-
Premium
DataAnalyst - Particle Counter Software - Operations Manual
DataAnalyst is a PC-based, multilingual software application that gives MiniCapt® Mobile, Lasair® III, and Lasair® Pro and their particle counter users the ability to download sampling data from a Lasair instrument, and to generate reports and time plots from that same sampling ...
-
Premium
Ultra DI 20 Plus Liquid Particle Counter - Operations Manual
This manual gives you the information necessary to successfully unpack, install, operate, and maintain the Ultra DI® 20 Plus liquid optical particle counter. The Ultra DI 20 Plus particle counter (also referred to as “particle sensor” or “sensor” throughout this manual) samples deionized water to monitor the presence of particles. Laser illumination with a ...
-
Premium
Lasair III - Model 110 - Aerosol Particle Counter - Operations Manual
This chapter is a brief introduction to the portable Lasair® III 110 aerosol particle counter and is intended to provide you with an overall description of the particle counter, a summary of technical specifications, and a range of environmental conditions for which the equipment is designed. If you are already familiar with the introductory information in this chapter, and are ready to ...
-
Premium
IsoAir - Model Pro-E - Aerosol Particle Sensor - Operations Manual
The IsoAir® Pro-E Remote Particle Counter from Particle Measuring Systems combines technology and experience into a highly user-friendly, versatile monitoring ...
-
Premium
Ultra DI - Model 20 Plus - 20 nm Liquid Optical Particle Counter - Datasheet
Ultra DI 20 Plus particle counter is designed and optimized for the world’s most advanced ultrapure water monitoring needs. By counting and sizing particles as small as 20 nm, the Ultra DI 20 Plus system provides unsurpassed particle detection. With features such as high counting efficiency, low zero-count, instrument to instrument matching across location and environmental conditions, and ...
-
Premium
NanoAir and ParticleSeeker - Operations Manual
The NanoAir™ 10 condensation particle counter (CPC) measures aerosol particles in air as small as 10 nm with a volumetric sample flow rate of 0.1 CFM (2.8 LPM). The NanoAir particle counter has been designed specifically for use in the cleanest fabrication facility environments. The NanoAir™ 10 particle counter can be operated by itself or with the appropriate accessories to provide ...
-
Premium
Ultra DI - Model 50 - Liquid Optical Particle Counter - Operations Manual
This manual gives you the information necessary to successfully unpack, install, operate, and maintain the Ultra DI 50 liquid optical particle counter. The Ultra DI 50 particle counter samples deionized water to monitor the presence of particles. Laser illumination with a high-resolution optical system, collects particlescattered light. Determination of particle size is accomplished with pulse ...
-
Premium
NanoAir - Model 10 - Condensation Particle Counter (CPC) - Datasheet
The NanoAir™ 10 is a purpose-built nanoparticle counter designed specifically for use in the most critical fab spaces. Enables detection of yield impacting particle excursions within Process Tools, Critical Cleanroom Areas, and Pressurized High Purity Gas delivery. The NanoAir™ 10 is a revolutionary new aerosol nanoparticle counter offering the sensitivity of a Condensation Particle ...
-
Premium
Lasair - Model Pro - Aerosol Particle Counter - Specification Sheet
Incorporating 45 years of particle counting experience, the Lasair® Pro Aerosol Particle Counter is designed with the latest technology to meet global requirements for data integrity. The touchscreen’s simple menu options facilitate logical navigation, and the instrument status is rapidly communicated through a distinct, multi-color light display. The exterior makes cleaning quick and ...
-
Premium
IsoAir - Model Pro-Plus - Remote Particle Counter - Manual
The IsoAir® Pro-Plus Remote Particle Counter from Particle Measuring Systems combines technology and experience into a highly user-friendly, versatile monitoring ...
-
Premium
PMS - Model FC-200 and FC-100 - UPW Flow Controllers for PMS Liquid Particle Counters - Specification Sheet
Complete flow control through a liquid particle counter is critical to ensure accurate and actionable data. Particle Measuring Systems offers the new FC-200 and FC-100 series of pressure balancing flow controllers as the perfect complement to our high precision liquid particle ...
-
Premium
IsoAir - Model Pro-E - Remote Particle Counter - Datasheet
The IsoAir® Pro-E Remote Particle Counter uses the latest technologies to simplify cleanroom monitoring into a simple but powerful package that meets global regulations. Data from the instrument can be incorporated into either Particle Measuring Systems’ FacilityPro® Monitoring System or Facility Net software, with the option of third-party communications via Modbus TCP/IP or ...
-
Premium
Reducing Sample Variation in Offline Particle Counting - Presentations
What is offline particle counting? Collecting a sample in a clean container. Transporting the sample to a laboratory. Using a sampling particle counter system to assess the fluid's ...
-
Premium
PMS - Model SLS-20 - Syringe Liquid Particle Sampler - Specification Sheet
The SLS-20 Syringe Liquid Particle Sampler enables Particle Measuring Systems’ Chem 20 or Chem 20-HI particle counters to operate in batch sampling applications. It is ideal for precise, small-volume sampling. The system consists of an SLS-20 for either corrosive or non-corrosive liquids, all connections necessary to interface with a compatible Chem 20 or Chem 20-HI particle counter and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you