Particle Counters Equipment For Monitoring And Testing Available In Nepal
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Lasair III 110 is a laser diode-based true 0.1 μm particle counter with 1.0 CFM flow rate. With a comprehensive set of features and unequalled accuracy, the Lasair III 110 offers reduced operating costs and the reliability and longevity to support its three-year laser ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Lasair III 110 particle counters are laser diode-based with 1.0 CFM flow rates that comes in 2 models for portable and inline monitoring: Lasair III 110 mobile particle counter: 0.1 micron particle counter can be used as a mobile counter to localize the source of particles, making this an ideal tool for ISO-14644-1 clean room certification for class 1 and 2 cleanrooms. Lasair III 110 inline ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The CLS-700 T corrosive liquid sampler is a compression sampler combined with a LiQuilaz® particle counter for effective measurement of particles in fluids contained in unpressurized vessels. It is ideally suited for testing chemicals containing dissolved gas, where bubbles could be incorrectly detected as particles. The system eliminates bubbles by pressurizing the sample and keeping the ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Sensitivity range: 0.3 - 25.0 µm; 1.0 CFM (28.3 LPM) - Built-in pump, choose wireless, analog & digital I/O. Particle Measuring Systems (PMS) is proud to introduce the IsoAir Pro-Plus remote particle counter. This next-generation in Contamination Control Strategy is a fixed environmental monitoring instrument that uses the latest technologies to simplify cleanroom monitoring into a ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
20 nm Online & Sample Particle Monitoring. Leading-edge microelectronic processes require very clean process chemicals that are highly filtered and regulated to a particle size of 20 nm or below. With 20 nm particle sensitivity, the Chem 20 Chemical Particle Counter from Particle Measuring Systems (PMS) supports the International Roadmap for Devices and Systems (IRDS) and a large variety of ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The LiQuilaz II E15P, E20, and E20P laser particle counters are volumetric monitors with sizing sensitivities from 1.5 – 125 µm. LiQuilaz II aser particle counters provide the same levels of accuracy, reliability and repeatability that customers have trusted for many years. LiQuilaz II sensors feature both RS-485 and Ethernet network communications. The new Ethernet capability ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
As part of a facility monitoring solution, the Airnet® II and IIs Particle Sensors from Particle Measuring Systems are an EU GMP Annex 1 solution that meets the specifications of ISO 21501-4 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing particles. A simple and cost-effective way to monitor your cleanroom, the Airnet II Air Particle ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The UltraChem® 40 Liquid Particle Counter gives you reliable contamination monitoring with the ability to detect 40 nm particles. If your application requires measuring small particles in chemicals with high molecular scatter, the UltraChem Liquid Particle Counter is the best tool for the job. NanoVision Technology eliminates the competition between the light scattered by fluid molecules and ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
A compact, VHP resistant remote particle counter. As part of a facility monitoring solution, the IsoAir® Pro-E Remote Particle Counter from Particle Measuring Systems (PMS) is an effective piece of a Contamination Control Strategy using the latest technologies to streamline cleanroom monitoring while meeting global regulations including EU GMP Annex 1, ISO 14644-2, and part of a 21CFR Part 11 ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
FieldLab 58 is a battery-powered, Integrated oil analysis system that provides quick and comprehensive oil analysis in the field. Commercial field service professionals managing fleets of high-value assets require portable, lightweight devices that provide rapid oil analysis results with quality similar to oil analysis labs. Funded by the United States Department of Defense (DoD), then developed ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Ultra DI 20 Plus liquid particle counter from Particle Measuring Systems (PMS) provides groundbreaking capabilities for monitoring of the most demanding ultrapure water systems. Counting and sizing contaminants as small as 20 nm in combination with real-time statistical analysis enables efficient characterization of filtration systems and optimum process control. The thermal stabilization ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati ePNC is an innovative particle counter sensor designed specifically for easy integration in Periodic Testing and Inspection (PTI) devices. This PN counter fills all requirements of the upcoming NPTI regulation for a particle number ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot PM is a robust particulate matter Monitor that can measure PM levels in the air. This PM detector uses laser scattering technology to measure PM1, PM2.5, PM10, and PM100 concentrations in the air. The industrial PM monitor is equipped with an optical particulate matter sensor. This sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD II reduces the pressure of dry, inert, non-toxic, non-flammable gases, such as Clean Dry Air (CDA), nitrogen, carbon dioxide and argon to a level acceptable for the Lasair II 110 and Lasair III 110 aerosol particle counters, which are designed to operate at atmospheric ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Bubble Separator from Particle Measuring Systems is a welded PFA device that allows entrained bubbles in an ultrapure water (UPW) or process chemical sample to separate from the sample stream through buoyancy, prior to the sample entering the liquid particle counter. The UPW or chemical sample 1) enters the middle of the bubble separator and 2) separates at the tee, with 3) the liquid sample ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The new Dekati MPEC+ (Mobile Particle Emission Counter) is a compact and portable instrument for easy onboard PN-PEMS measurements. At the core of the MPEC+ is the patented Dekati ePNC particle counting technology, which has been further optimized for fast transient emission measurements. The MPEC+ is the device of choice for highly accurate PN-PEMS testing in accordance with RDE requirements. ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
ISO 14644-1/2 Education and Resources. ISO 14644-1/2:2015 continues to pose challenges to cleanroom managers and manufacturers. Here we provide several sources of information to help everyone from those new to this ISO regulation to veterans in the field. Our team of regulatory experts has put together a package of information so you can easily understand the requirements and what you need to do ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The ParticleSeeker is a 10-port smart manifold companion to the NanoAir™ aerosol nanoparticle counter. The ParticleSeeker is a 10-port smart manifold companion to the NanoAir 10 aerosol nanoparticle counter. Designed specifically for use in the most critical fab spaces, it is available for use in applications that require multiple sample locations to be monitored in a sequential or ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The IsoAir® 310P Air Particle Sensor makes it easy to monitor air in remote locations or in areas with process restraints. Real-time particle monitoring gives quick notification of particle anomalies, detecting 0.5 and 5.0 µm for GMP and FDA compliance. A central vacuum is not needed to operate the particle sensor, and it features a built in “low noise” blower together with ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Purpose-built nano condensation particle counter CPC designed for use in the most critical fab spaces. The NanoAir™ 10 Condensation Particle Counter (CPC) is a revolutionary new product from Particle Measuring Systems (PMS). It provides the sensitivity of a CPC with the ease of use and functionality of a traditional cleanroom particle counter. Designed to monitor ultra-clean environments, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you