Particle Counters Equipment For Monitoring And Testing Available In San Marino
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The ParticleSeeker is a 10-port smart manifold companion to the NanoAir™ aerosol nanoparticle counter. The ParticleSeeker is a 10-port smart manifold companion to the NanoAir 10 aerosol nanoparticle counter. Designed specifically for use in the most critical fab spaces, it is available for use in applications that require multiple sample locations to be monitored in a sequential or ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Advanced Aerosol Manifold for sequentially monitoring aerosol contamination at multiple cleanroom locations with a fixed airborne particle counter. The AM II Aerosol Manifold from Particle Measuring Systems offers advanced features for sequentially monitoring contamination at multiple cleanroom locations with a fixed airborne particle counter. The AM II aerosol manifold is ideal for trend ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The CLS-700 T corrosive liquid sampler is a compression sampler combined with a LiQuilaz® particle counter for effective measurement of particles in fluids contained in unpressurized vessels. It is ideally suited for testing chemicals containing dissolved gas, where bubbles could be incorrectly detected as particles. The system eliminates bubbles by pressurizing the sample and keeping the ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The SLS Syringe Sampling System is ideal for applications where precise, small-volume sampling is needed. The system consists of a syringe sampler for either corrosive or non-corrosive liquids, a particle counter for different sizing sensitivities, and software. A convenient naming system identifies the particle counter installed inside the instrument. ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Lasair III Particle Counter is designed for cleanrooms with your unique needs in mind. It sets the standard for portable aerosol particle counters in highly regulated environments, so you can make sure your environment is clean. It can be used for both remote and mobile routine cleanroom monitoring. We know the requirements and we’ve done the calculations for you; cleanroom ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
High-technology manufacturing processes often require high-purity gases. The HPGP-101-C High Pressure Gas Probe System provides reliable in-line contamination monitoring for process gases at line pressure. The High Pressure Gas Probe System is compatible with oxygen, hydrogen and most non-toxic gases, and it can be used in many reactive gas monitoring applications. The High Pressure Gas Probe ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The UltraChem® 40 Liquid Particle Counter gives you reliable contamination monitoring with the ability to detect 40 nm particles. If your application requires measuring small particles in chemicals with high molecular scatter, the UltraChem Liquid Particle Counter is the best tool for the job. NanoVision Technology eliminates the competition between the light scattered by fluid molecules and ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Complete flow control of ultrapure water through a liquid particle counter is critical to ensure accurate and actionable data. Particle Measuring Systems (PMS) offers the new FC-200 and FC-100 series of pressure balancing flow controllers as the perfect complement to our high precision liquid particle counters. The FC-100 automatically adjusts to pressure changes within the particle counting ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The IsoAir® 310P Air Particle Sensor makes it easy to monitor air in remote locations or in areas with process restraints. Real-time particle monitoring gives quick notification of particle anomalies, detecting 0.5 and 5.0 µm for GMP and FDA compliance. A central vacuum is not needed to operate the particle sensor, and it features a built in “low noise” blower together with ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
20 nm Online & Sample Particle Monitoring. Leading-edge microelectronic processes require very clean process chemicals that are highly filtered and regulated to a particle size of 20 nm or below. With 20 nm particle sensitivity, the Chem 20 Chemical Particle Counter from Particle Measuring Systems (PMS) supports the International Roadmap for Devices and Systems (IRDS) and a large variety of ...
-
PremiumManufactured by ENVEAbased in FRANCE
Dusty is a filter monitor that works on a triboelectric ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Particle Measuring Systems’ HSLIS-M50e Deionized Water Particle Counter provides continuous, real-time monitoring of contamination. The instrument makes it easy to understand the characteristics of your working fluid. The combination of high sensitivity and low cost makes it ideal when large numbers of sensors and/or long-term trending are required. Integration of the HSLIS Liquid ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Ultra DI® 50 Liquid Particle Counter is designed specifically for de-ionized (DI) water systems and will count and size contaminants as small as 0.05 μm. Larger sample volumes and ultra-low zero count capability allow you to detect smaller excursions with more relevant statistical data, with shorter sample intervals for quick data analysis so you can respond immediately to ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Gravimetric Impactor (DGI) is a high sample flow rate cascade impactor for low concentration particle measurement applications. The DGI measures gravimetric particle mass size distribution of particles < 2.5 μm in five size fractions. Typical measurement applications of the DGI impactor include engine emission measurements, air quality studies and other low concentration ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD II reduces the pressure of dry, inert, non-toxic, non-flammable gases, such as Clean Dry Air (CDA), nitrogen, carbon dioxide and argon to a level acceptable for the Lasair II 110 and Lasair III 110 aerosol particle counters, which are designed to operate at atmospheric ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
MicroLab all-in-one automated lubricant analysis system for comprehensive, on-site testing. The MicroLab combines automation and artificial intelligence in an all-in-one oil analysis tool, making on-site oil analysis possible for any ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The Dustroid Smart is an air particulate monitoring device specially developed to monitor ambient dust particles. The Dustroid Smart is a compact and connected optical particle counter which offers near real-time particulate matter count. The easy to install and the requirement for minimal space for deployment make it a scalable solution to create a dense network of data points. The Smart version ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Lasair III 110 particle counters are laser diode-based with 1.0 CFM flow rates that comes in 2 models for portable and inline monitoring: Lasair III 110 mobile particle counter: 0.1 micron particle counter can be used as a mobile counter to localize the source of particles, making this an ideal tool for ISO-14644-1 clean room certification for class 1 and 2 cleanrooms. Lasair III 110 inline ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Bubble Separator from Particle Measuring Systems is a welded PFA device that allows entrained bubbles in an ultrapure water (UPW) or process chemical sample to separate from the sample stream through buoyancy, prior to the sample entering the liquid particle counter. The UPW or chemical sample 1) enters the middle of the bubble separator and 2) separates at the tee, with 3) the liquid sample ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Lasair III 110 is a laser diode-based true 0.1 μm particle counter with 1.0 CFM flow rate. With a comprehensive set of features and unequalled accuracy, the Lasair III 110 offers reduced operating costs and the reliability and longevity to support its three-year laser ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you