Particle Counters Services For Monitoring And Testing Available In Malta
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Our service technicians are well trained to calibrate your PMS instruments to the highest standards and our software-controlled approach automates critical steps that drive consistency in each calibration. This ensures the same calibration result and performance, consistent with the factory calibration, regardless of where the calibration is performed—anywhere in the ...
-
Manufactured by Kanomax USA, Inc.based in USA
As many Kanomax instruments are used to measure airflow, particle counts, temperature, pressure, humidity, etc. in environments where a half of a percentage point of error could be absolutely critical, we take calibration service and repair very seriously. That’s why we employ the most proven, experienced service technicians and relay on the best calibration equipment money can buy. ...
-
based in USA
EFI Global offers a team of qualified microbiologists and chemists to evaluate indoor air quality (IAQ) issues caused by microbiological materials such as molds, carbon dioxide, formaldehyde, temperature, humidity, carbon monoxide, radon gas, particulates and volatile organic compounds. Our staff includes PhD-level human health risk assessors, certified environmental infection control (CEICS) ...
-
Manufactured by QSGroup Srlbased in ITALY
Thanks to our AltiorLab subsidiary (Accredia centre no. 266, ISO 17025:2018 certified), QSGroup can carry out calibrations on particle counters in compliance with ISO 21501-4:2018. This service is the first and only one, to date, on the Italian market. It allows companies to be certified and implement very high quality standards. Our expert technicians can travel to a customer’s workplace ...
-
Manufactured by Climet Instruments Companybased in USA
Calibration & repair of your Climet particle counter or microbial sampler. Service you can trust! Climet provides ISO 21501-4 calibration and repair support for all Climet manufactured products. You can be assured the most current methods and procedures are used whether your instrumentation is calibrated at our factory, a Climet Service Center, or with one of our many authorized international ...
-
based in USA
Tests for particle retention, capacity, pressure drop and motor emissions: Automotive engine intake and cabin air. Household vacuum and room cleaners. Respirators. Particulate and odor/fume retention and capacity. Compressed air and coalescing filters. Aerospace engine ...
-
based in USA
During the design process, the real fun begins when your engineering staff has to learn new methods, new equipment, and new practices in order to get that new process to operate efficiently. The time it would take to learn a new process that is not core to your business is very time consuming, and non-productive in terms of the true mission of your organization. ...
-
based in USA
Electric Sensing Zone is also referred to as the Coulter Technique or Coulter Counter. The instrument is a true high resolution, high speed particle counter and particle size distribution analyzer that covers a nominal span of about 1.0 um to 300um. Under special circumstances, the lower detection level can be reduced to about 0.4 um. Data is typically presented to our clients on a Frequency ...
-
Distributed by Betatek Inc.based in CANADA
Many of the vendors that Betatek represents specialize in manufacturing instrumentation designed primarily for highly regulated industries, including pharmaceutical and food. These instruments are specifically designed to be ...
-
Manufactured by Filtertechnik Ltdbased in UNITED KINGDOM
Hot oil flushing is ideal for troublesome systems or where large amounts of contamination have been introduced to a machine. The rigs we use are the latest in flushing technology. They are very portable hot oil pulsation units designed to work on any system with up to 180mm (7”) inside diameter pipework. On-board Particle Counters ensure the correct ISO / NAS cleanliness is reached. ...
-
Manufactured by Climet Instruments Companybased in USA
Real Time Monitoring in Critical Areas: Whether you're a start-up or a campus environment with multiple production facilities, Climet offers software and strategic partnerships designed to satisfy any requirement. Climet - A partner you can trust! Facility Monitoring System (FMS) for continuous and sequential routine monitoring of particle counters and microbial air sampler metadata. ...
-
Manufactured by Vision Advance Speciality Carbons Pvt. Ltd.based in INDIA
VAS Carbons is equipped with modern laboratory to test various parameters of Activated Carbon. Our way of managing quality of raw materials, semi-finished goods, and finished goods is unique in the activated carbon industry. We have implemented Enterprise Resource Planning (ERP) software which enables our team of Quality Control (QC) and Quality Assurance (QA) professionals to track/identify/ ...
-
Manufactured by Kanomax USA, Inc.based in USA
Kanomax provides a complete line of products, from field test equipment to instruments used in the actual test and development of HVAC testing equipment. Rugged but accurate field instruments for the TAB technician, reliable anemometers and particle counters for development support, and precise monitoring instruments for laboratory environment control – we have it ...
-
Distributed by Betatek Inc.based in CANADA
Regulatory requirements or in-house Standard Operation Procedures frequently call for instrument calibration. Betatek has the expertise and the traceable tools to perform the calibration of a wide range of laboratory and pharmaceutical ...
-
Manufactured by ChemTreat - Veraltobased in USA
In order to maintain the highest levels of customer service, ChemTreat operates a state of the art analytical laboratory to support field testing, troubleshoot complex problems, and create new solutions for your ...
-
Manufactured by Climet Instruments Companybased in USA
Convenient onsite qualification to our valued customers for their new particle counters or microbial samplers. Selecting the right qualification expert for your particle counter or microbial sampler is important as it ensures operational success and efficiency. Climet offers convenient onsite IQ and OQ services for new equipment, or requalification after any other activity (i.e., moving, ...
-
Manufactured by QSGroup Srlbased in ITALY
Our company is one of the few in Italy and Europe to offer calibrations and validations at a client’s workplace (on-site) with a state-of-the-art mobile calibration laboratory. ...
-
by Analis sabased in BELGIUM
Helping every laboratory to find the most smart service solutions that improves workflow efficiency, safeguards lab equipment, enhances user skills, and increases result accuracy is a first priority. Analis covers all aspects of laboratory management in various application fields. ...
-
Manufactured by Jinan Winner Particle Instrument Stock Co., Ltd.based in CHINA
Quality Assurance For Laser Particle Size Analyzer. Strictly conforming to ISO9001-2000 quality management system. Strict control from purchasing materials, process inspection to final particle size distribution test. QC department to execute quality control regulations. Only qualified components will be assembled and total laser particle size analyzer must be inspected completely before sale. ...
-
Manufactured by PAMAS - Partikelmess- und Analysesysteme GmbHbased in GERMANY
The PAMAS After Sales Support has priority and PAMAS service continues also after the particle counter has been sold. We attach great importance to a service of higher value and to standardised ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you