Only show results available in Connecticut? Ok

Particle Monitoring Applications

  • Premium

    Particle measurement and sampling equipment for Engine emissions

    Dekati measurement solutions for determination of particulate emissions from engines include both particle detection and sample conditioning solutions. For tailpipe emission measurements, we have solutions for both CVS and tailpipe sampling, both upstream and downstream exhaust after-treatment devices. Our sample conditioning instruments can be connected to any particle measurement instrument and allow engine exhaust measurements from various conditions and engines. Both dynamometer and on-board conditions. CVS...

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Premium

    Particle measurement and sampling equipment for Non-Road engine emissions

    Dekati measurement solutions for determination of particulate emissions from engines include both particle detection and sample conditioning solutions. For non-road and off-road emission measurements, we have complete measurement solutions both upstream and downstream exhaust after-treatment devices. The exhaust sample conditions in marine and aircraft engine emission measurements may vary a lot depending on the type of engine, type of fuel and also measurement location. Our sample conditioning instruments can be...

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Premium

    Monitors, gas analyzers solutions for aerospace & defense

    PMS has been involved in particle counting for aerospace applications for 40 years. This includes everything from spacecraft assembly to building a particle monitor for use on other planets. In 1978, a PMS particle counter was onboard the Pioneer Venus Project. Our latest technologies meet the needs of a new competitive era, where both private and government aerospace entities can thrive. We understand the unique challenges of this industry. Get application and product information below…

    By Particle Measuring Systems based in Boulder, COLORADO (USA).

  • Premium

    Particle measurement and sampling equipment for Stationary source emissions

    Dekati has over 25 years of experience in providing measurement solutions for emission measurements. Today, our selection of measurement solutions for stationary source emission measurements include both real-time and gravimetric detection of concentration and particle size distribution. Our extensive line of sample conditioning devices enable not only environmental emission measurements but also measurements directly from the combustion zone and before heat exchangers and used flue gas cleaning devices. Dekati...

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Premium

    Particle measurement and sampling equipment for Aerosol research

    Dekati has 25 over years of experience in providing high end aerosol research instrumentation and sample conditioning solutions to universities, research institutes, and laboratories all around the world. Dekati® Instruments and sample conditioning systems have a long, exquisite track record of scientific publications and our in-house R&D continuously develops new are more accurate ways to characterize different aspects of aerosols. Particle size and concentration studies. Particle shape and density...

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Premium

    Particle measurement and sampling equipment for Inhalation aerosol measurements

    Dekati Solutions for inhalation aerosol research include real-time particle net charge and bipolar charge measurement instruments. Dekati BOLAR™ is the only commercially available instrument that can detect both positive and negative charge levels of different sized particles in real-time. This electrical charge carried by inhalation aerosols has been found to have effect on device performance and lung deposition of Dry Power Inhalers (DPI), Metered Dose Inhalers (MDI) and nebulizers. Measuring and optimizing...

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Premium

    Monitors, gas analyzers solutions for pharmaceuticals / life sciences

    The only complete Contamination Monitoring Solutions Provider. Since 1972, Particle Measuring Systems has been the global expert in contamination monitoring, providing the pharmaceutical and other life science industries with the expertise to detect, analyze and manage cleanroom contamination so you can meet all regulatory requirements including ISO 14644-1:2015 and EU GMP Annex 1.

    By Particle Measuring Systems based in Boulder, COLORADO (USA).

  • Premium

    Particle measurement and sampling equipment for Non-Exhaust vehicle emissions

    As exhaust emissions from engine tailpipe have been decreasing in recent years through development of engines and exhaust after-treatment systems, non-exhaust emissions have become a major contributor to total particle emissions from vehicles. Dekati provides complete measurement solutions for brake wear and blow-by gas emission measurements and we can cover the complete particle size using only one measurement method – 6 nm – 10 µm with one measurement method.

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Premium

    Flow measurement instrumentation for emissions & analytical solutions

    Sierra manufacturers the BG3 Elite Partial Flow Dilution system for use in diesel particulate sampling. BG3 Elite is a direct replacement to cumbersome full flow CVS systems in both heavy and light duty emissions applications. The BG3 Elite can feed properly conditioned diluted sample flow to a Bag Mini-Diluter for gaseous analysis or even to a Particle Number measurement device.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Emission control solutions for air caption & dedusting sector

    Several industries face problems from dust released during product transportation or processing. This is the case of the Textile, Wood Processing, Mining, Ink Manufacturing and other industries. Frequently, in order to maintain an appropriate level of particles suspended in the air (usually measured in Parts per Million by Volume), dust is extracted with air in strategically positioned caption points and typically recovered in cyclones or in bag filters.

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Premium

    Monitors, gas analyzers solutions for photonics & optics

    Advanced optics manufacturing is now requiring much cleaner processing environments than were necessary in the past. Smaller device structures, use of shorter wavelengths, and higher laser power densities are all factors that make advanced components more susceptible to damage from contamination. Particle Measuring Systems can provide you with the tools to determine how clean your environment is.

    By Particle Measuring Systems based in Boulder, COLORADO (USA).

  • Premium

    Particle measurement and sampling equipment for Air quality

    Dekati® Solutions for air quality particle measurements include both air quality monitoring and atmospheric aerosol research instruments. Our aerosol measurement solutions have been successfully used in various ambient aerosol research and monitoring areas for over 25 years and today, our instruments are used globally by thousands of customers both in research and industry to measure different properties of airborne particles

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Premium

    Machine condition monitoring for rail fleet

    Overview Machine condition monitoring based on oil analysis has become an important, if not mandatory, maintenance practice by the transportation industry. An effective oil analysis program will keep important transportation industry assets such as engines in gearboxes in trains, buses and any other oil-wetted machinery in operation by reducing unexpected failures and costly unscheduled downtime.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Flowing Waters - Flood Protection solutions for Flow Measurement Protected Area Drainage

    Application: Steel pipeline DN 500. Fully filled. Groundwater without any pollution. Measurement system permanently immersed. due to short calming section.

    By NIVUS GmbH based in Eppingen, GERMANY.

  • Premium

    Meteorological sensors for dust monitoring

    Air is lifeblood. Daily we inhale approximately 15.000 liter. Still, the air contains invisible pollutants, which vary in its composition and concentration depending on the location. Especially the respirable particles with a diameter of less than 2.5 µm (PM 2.5) were considered to be particularly dangerous.

    By OTT HydroMet based in Kempten, GERMANY.

  • Premium

    Zeta Potential

    Zeta potential is a parameter characterizing electrochemical equilibrium at interfaces. It depends on the properties of both the surface and the surrounding liquid. It plays an important role in the theory of aggregative stability, also known as DLVO theo

    By Dispersion Technology Inc. based in Bedford Hills, NEW YORK (USA).

  • Premium

    Acoustic Theory

    Acoustic theory for heterogeneous system should yield a relationship between some measured macroscopic acoustic properties, such as sound speed, attenuation, acoustic impedance, angular dependence of the scattered sound, etc., and some microscopic charact

    By Dispersion Technology Inc. based in Bedford Hills, NEW YORK (USA).

  • Premium

    Machine condition monitoring for power generation

    Power plants are expected to operate 24 hours per day, 7 days per week. Downtime and equipment derating (when a generator fails to deliver power at its rated capacity) can cost a power plant thousands of dollars per hour. The cost of replacing failed equipment is also extremely high. Vibration analysis by itself is not enough to anticipate catastrophic failures. Oil analysis is often able to detect problems at a much earlier stage than vibration analysis. This is why more and more power plants are bringing oil...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Machine condition monitoring for aviation, aerospace & airlines

    Overview Oil analysis has long been practiced for aircraft engines and other airborne oil-wetted systems such as hydraulic systems and gear boxes in helicopters. Military organizations are perhaps the number one users of oil analysis testing and commercial aviation also has a long history of oil analysis. A number of airlines throughout the world do their own oil analysis, but in many cases they send samples to commercial oil laboratories. Engine manufacturers also do oil analysis as part of engine development...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Continuous emissions monitoring for real driving emissions

    There are many cars that have a large impact on the environment in many places around the world. The emissions from fossil fuel cars are too high, and previous test methods have not given the full picture. Tests in a laboratory has, so far, been made indoors, in laboratories, and they do not match the reality, as they do not take into account the real driving conditions. Therefore, we have developed an accurate and reliable monitoring system that can measure the emissions in real life conditions. Based on our...

    By Opsis AB based in Furulund, SWEDEN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you