Particle Sampling Downloads
-
Premium
Ultra DI - Model 50 - Liquid Optical Particle Counter - Operations Manual
This manual gives you the information necessary to successfully unpack, install, operate, and maintain the Ultra DI 50 liquid optical particle counter. The Ultra DI 50 particle counter samples deionized water to monitor the presence of particles. Laser illumination with a high-resolution optical system, collects particlescattered light. Determination of particle size is accomplished with pulse ...
-
Premium
Reducing Sample Variation in Offline Particle Counting - Presentations
What is offline particle counting? Collecting a sample in a clean container. Transporting the sample to a laboratory. Using a sampling particle counter system to assess the fluid's ...
-
Premium
PMS - Model SLS-20 - Syringe Liquid Particle Sampler - Specification Sheet
The SLS-20 Syringe Liquid Particle Sampler enables Particle Measuring Systems’ Chem 20 or Chem 20-HI particle counters to operate in batch sampling applications. It is ideal for precise, small-volume sampling. The system consists of an SLS-20 for either corrosive or non-corrosive liquids, all connections necessary to interface with a compatible Chem 20 or Chem 20-HI particle counter and ...
-
Premium
Choosing the Most Suitable Particle Sample Point Locations in the Cleanroom - Application Notes
As environmental system designers, we are often asked where to place sample points for particle monitoring, whether it be performed in a pharmaceutical cleanroom or clean device (RABS, isolator, etc.). The answer is not always straightforward. There are several guidance documents that offer advice on what processes need to be monitored, along with advice on suitable distances from the process ...
-
Premium
Airborne Particle Measurements: 100 LPM vs. 1 CFM Particle Counters in a Semiconductor Cleanroom Environment - Application Notes
Many current standards define airborne particle monitoring in units of particles-per-cubic-meter (particles/m3). Often, these standards require sampling an entire cubic meter (1 m3) to provide an accurate measurement of airborne particulate levels. Using a conventional aerosol particle counter that samples 1-cubic-foot per minute (1 CFM) requires more than 35 minutes to sample 1 m3. Now Particle ...
-
Premium
PMS - Model 1040, 1100, 1200, 1300, 1500, 2000 - Syringe Liquid Particle Sampler (SLS) - Specification Sheet
The SLS Syringe Sampling System is ideal for applications where precise, small-volume sampling is needed. The system consists of a syringe sampler for either corrosive or non-corrosive liquids, a particle counter for different sizing sensitivities, and software. A convenient naming system identifies the particle counter installed inside the ...
-
Premium
PMS - Model CLS-700 T - Corrosive Liquid Particle Sampler - Specification Sheet
The CLS-700 T corrosive liquid sampler is a compression sampler combined with a LiQuilaz® particle counter for effective measurement of particles in fluids contained in unpressurized vessels. It is ideally suited for testing effervescent chemicals. The system eliminates bubbles by pressurizing the sample and forcing the bubbles into ...
-
Premium
Particle Sensor Safety Cabinet - Ambient Temperature Applications - Specification Sheet
The Particle Measuring Systems® Particle Sensor Safety Cabinet provides chemical containment and safe operating conditions for the Chem 20™ and UltraChem® 40 or 100 chemical particle counting sensors. The cabinet is designed to sit on a shelf or other flat surface. The cabinet enclosure houses the chemical particle sensor, detects chemical leaks with an external alarm, and provides ...
-
Premium
Analysis of Aerosols - Brochure
The combustion of fossil fuels for energy production pollutes the environment with large quantities of harmful substances in the form of gases or aerosols. These emissions cause damage, not only at their source, but also far away from it. The chemical and physical properties of the emissions from anthropogenic as well as natural sources are highly relevant to the climate and the environment. The ...
By Metrohm AG
-
Premium
Dekati - Cyclone - Brochure
The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement instrument. ...
By Dekati Ltd.
-
Premium
Dekati - Model ELPI+ - High Resolution Impactor - Brochure
The Dekati High Resolution ELPI+ (Electrical Low Pressure Impactor, HR-ELPI+) is an improved version of the widely used ELPI+ instrument. The High Resolution ELPI+ utilizes a data inversion algorithm that gives real-time particle size distribution in up to 500 size classes 6 nm – 10 μm. Other High Resolution ELPI+ features include wide particle sample concentration range, robust ...
By Dekati Ltd.
-
Premium
Dekati - Model eFilter - Standard Gravimetric Filter Holders - Brochure
The Dekati eFilter is a unique instrument that combines a standard gravimetric filter holder and sensitive real-time PM detection in one compact instrument. The Dekati eFilter assembly includes a standard gravimetric filter holder that is used to determine gravimetric mass of particles in the ...
By Dekati Ltd.
-
Premium
Dekati - Model PM10 - Three Stage Cascade Impactor - Brochure
The Dekati PM10 Impactor is a three-stage cascade impactor for determining particle gravimetric mass size distribution. The operating principle of the Dekati PM10 impactor is based on inertial size classification and gravimetric or chemical analysis of the collected, size classified particle samples. This impactor has cutpoints of 10, 2.5 and 1 μm making it an ideal choice for PM10, PM2.5 and ...
By Dekati Ltd.
-
Premium
Dekati - Model eDiluter Pro 1200C - Dilution System - brochure
The Dekati eDiluter Pro 1200C is a modified version of the eDiluter Pro dilution system specifically designed for particle measurements from extreme temperatures such as measurements directly from a combustion zone or flame. The eDiluter Pro 1200C includes the standard eDiluter Pro unit combined with the Dekati High Temperature Sampling probe that enables particle sampling from up to 1200 °C. ...
By Dekati Ltd.
-
Premium
Innovation Nilu - Aluminium Filter Holder System - Datasheet
The NILU filter holder system is designed for sampling of particles and gaseous compounds on impregnated filters in air pollution measurements. It includes an open face version, which can be used with several successive stages of filters. The aluminium version is designed to sample microplastics and other compounds sensitive to polycarbonate. Filters with different pore size or impregnating ...
-
Premium
Siemens Sitrans - Model SL - Gas Analyzer (TDLS) - Brochure
The SITRANS SL sets standards for in-situ process measurements in harsh operating environments. The gas analyzer is suitable for highly sensitive oxygen measurements, and is based on the tunable diode laser spectroscopy (TDLS) measurement method. SITRANS SL works without any sampling and sample-preparation systems. It also works effectively in real time, extremely precisely, and largely free of ...
-
Premium
PM162M Automatic, Low Volume, Particulate Sampler - Datasheet
PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible physicochemical laboratory ...
By ENVEA
-
Premium
Tekran - Model 2642 - Natural Gas Sampler - Brochure
Tekran and VE Technology have partnered together to improve the quality of Natural Gas sampling and analysis. Proper sample collection requires precision equipment to assure mercury is quantitatively transported between the source pipeline and the sample collection device. The Tekran 2642 Natural Gas Sampler paired with a Tekran 2600-NG provides a complete sampling and analysis solution. Sampling ...
-
Premium
Innovation Nilu - Filter Holder System - Brochure
The NILU filter holder system is designed for sampling of particles and gaseous compounds on impregnated filters in air pollution measurements. It includes an in-line and an open-face version, both of which can be used with several successive stages of ...
-
Holbach - Model LKS 30 / LKS100 / PS 30 - Datasheet
Our air sampling heads are ideally suited for the sampling of cultivable particles onto culture media. For operation in industrial and health care applications as well as expert surveys, they reliably deposit particles of the sampling air into standard Petri dishes. Two versions are available: LKS100 and LKS 30 rated with 100 l/min and 30 l/min, respectively. The air sampling heads work by the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you