Particle Sampling Equipment For Monitoring And Testing Available In Louisiana
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The SLS Syringe Sampling System is ideal for applications where precise, small-volume sampling is needed. The system consists of a syringe sampler for either corrosive or non-corrosive liquids, a particle counter for different sizing sensitivities, and software. A convenient naming system identifies the particle counter installed inside the ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HandiLaz®Mini II handheld particle counter from Particle Measuring Systems is ergonomically designed to fit in the palm of your hand. Rugged and dependable, this small-footprint, lightweight instrument provides tremendous value for cost-conscious users who want a reliable, easy-to-use, handheld particle counter. With a comprehensive set of features, the HandiLaz® Mini II handheld ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q is ready to help with your stack sampling requirements: State and Federal nuclear regulatory agencies require a stack discharge sampling program as part of the licensing process. Radionuclides discharged to the air in the form of particulate and volatile compounds must be assayed. Therefore, nuclear facilities are required to follow standard protocol for sampling their effluent. Possible ...
-
PremiumManufactured by ARC Filtration System Ltdbased in CHINA
The nylon membrane is made of polyamide 66. It is hydrophilic in nature with good chemical compatibility. It can filter all water-based liquids and most organic solutions such as alcohols, hydrocarbons, ethers, esters, ketones, etc. The nylon membrane is widely used for sample collection, pre-filtration, sample testing and removal of particles, bacteria and micro-organisms. It reinforced nylon ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Small particles, small samples, high yields. With the Nano Spray Dryer B-90 HP, gently process the smallest sample amounts into submicron particles with minimal product loss. The user-friendly system improves productivity in areas where small particles make a big ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Combining IC with an electrospray ionization mass spectrometer (ESI-MS) or an inductively coupled plasma mass spectrometer (ICP-MS) solves even complex separation problems while achieving outstanding sensitivities and selectivities. These so-called hyphenated techniques provide valuable information for unambiguous peak identification and are less prone to matrix influences than IC with ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
MiniLab 53 is a basic on-site oil analysis lab for condition based maintenance for Industrial Machinery. Oil analysis provides early indications of equipment wear and identifies the root causes of corrosion. On-site oil analysis eliminates the wait associated with sending samples off-site and enables immediate decision making. With three simple test, the MiniLab 53 delivers comprehensive on-site ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The ParticleSeeker is a 10-port smart manifold companion to the NanoAir™ aerosol nanoparticle counter. The ParticleSeeker is a 10-port smart manifold companion to the NanoAir 10 aerosol nanoparticle counter. Designed specifically for use in the most critical fab spaces, it is available for use in applications that require multiple sample locations to be monitored in a sequential or ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Temperature ELPI+ (Electrical Low Pressure Impactor, HT-ELPI+) is a unique version of the Dekati ELPI+ that enables real-time measurement of particle size distribution from 6 nm up to 10 μm with 10 Hz sampling rate. The High Temperature ELPI+ allows direct measurement of up to 180 °C high temperature aerosol samples without the need to cool the sample, which makes the ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Discover Eco IC, an ion chromatography system that focuses on the essentials while not compromising on quality, robustness, and reliability. Eco IC has been developed to enable more users to benefit from this technique. Whether you need to perform routine water analysis or you’re looking for an instrument for higher education, Eco IC comes with all the components you need. In addition, you ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Break-away design Cyclone (PM2-NT) shown with probe and pitot. The Kit does not include Pitot ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PM10 is used for Method 201A testing and is designed for in-stack measurement of particulate matter equal to or less than 10 microns. The shank has a 5/8-inch outer diameter for easy adaptation to an in-stack 47-mm filter assembly or probe. The PM10 cyclone kit includes cyclone assembly, PM10 nozzle set, 47-mm filter assembly, and a carrying case. Kits are available in stainless steel or alloy ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The HT-DLPI+ (High Temperature Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The SLS Syringe Sampling System is ideal for applications where precise, small-volume sampling is needed. The system consists of a syringe sampler for either corrosive or non-corrosive liquids, a particle counter for different sizing sensitivities, and software. A convenient naming system identifies the particle counter installed inside the instrument. ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Metrohm Inline Sample Preparation (MISP) puts an end to manual sample preparation for ion chromatography. MISP stands for methods developed by Metrohm that allow you to fully automate the preparation of even the most challenging samples. Not only will you increase sample throughput but also improve accuracy and reproducibility of analyses and ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Houses the chemical particle sensor, detects chemical leaks with an external alarm, and provides secondary containment when a leak occurs. In the event of a chemical leak within the chemical particle counter or sample connections, the system will automatically detect the leak, shut off inlet and outlet sample valves, turn off power to the particle sensor, and provide an external alarm ...
-
PremiumManufactured by ARC Filtration System Ltdbased in CHINA
MCE flat membranes are made from a mixture of cellulose nitrate and cellulose acetate, which can retain microorganisms and particles from fluids. They are widely used in aqueous solution sterile filtration, aqueous solution clarification, particle collection and analysis, microbial detection, air monitoring, mobile phase (aqueous phase) filtration for HPLC, ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Resolution ELPI+ (Electrical Low Pressure Impactor, HR-ELPI+) is an improved version of the widely used ELPI+ instrument. The High Resolution ELPI+ utilizes a data inversion algorithm that gives real-time particle size distribution in up to 500 size classes 6 nm – 10 μm. Other High Resolution ELPI+ features include wide particle sample concentration range, robust ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Advanced Aerosol Manifold for sequentially monitoring aerosol contamination at multiple cleanroom locations with a fixed airborne particle counter. The AM II Aerosol Manifold from Particle Measuring Systems offers advanced features for sequentially monitoring contamination at multiple cleanroom locations with a fixed airborne particle counter. The AM II aerosol manifold is ideal for trend ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
For batch sampling applications using Chem 20 and Chem 20-HI particle counters. The SLS-20 Syringe Liquid Particle Sampler enables Particle Measuring Systems’ Chem 20 or Chem 20-HI particle counters to operate in batch sampling applications. It is ideal for precise, small-volume sampling. The system consists of an SLS-20 for either corrosive or non-corrosive liquids, all connections ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you