Particle Sensors Equipment For Monitoring And Testing Available In Europe
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Airnet II is ideal for remote continuous particle monitoring as a component of a Facility Monitoring System. It meets the specifications of ISO 21501-4 and EU GMP Annex 1 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing particles. The Airnet II Particle Sensor provides unparalleled performance with data transmission capabilities for ...
-
PremiumManufactured by Testo, Inc.based in USA
The number of solid fuel burning systems, and the fine particles they emit, has continued to soar over the past years. This, and the amendment of 1. BlmSchV, has presented chimney sweeps, heating engineers, and service technicians with a new and formidable challenge. The testo 380 fine particle analyzer is designed to aid these professionals in performing easy and precise fine particle ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Houses the chemical particle sensor, detects chemical leaks with an external alarm, and provides secondary containment when a leak occurs. In the event of a chemical leak within the chemical particle counter or sample connections, the system will automatically detect the leak, shut off inlet and outlet sample valves, turn off power to the particle sensor, and provide an external alarm ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
20 nm Online & Sample Particle Monitoring. Leading-edge microelectronic processes require very clean process chemicals that are highly filtered and regulated to a particle size of 20 nm or below. With 20 nm particle sensitivity, the Chem 20 Chemical Particle Counter from Particle Measuring Systems (PMS) supports the International Roadmap for Devices and Systems (IRDS) and a large variety of ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Advanced Aerosol Manifold for sequentially monitoring aerosol contamination at multiple cleanroom locations with a fixed airborne particle counter. The AM II Aerosol Manifold from Particle Measuring Systems offers advanced features for sequentially monitoring contamination at multiple cleanroom locations with a fixed airborne particle counter. The AM II aerosol manifold is ideal for trend ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The cordless battery-operated LEAKSPY C4 precisely measures the C4-FN concentration in air by means of a non-dispersive infrared sensor (NDIR sensor) and indicates the value on a graphic display in ppm. The device allows precise localisation of leaks by searching the highest C4-FN concentration.Thanks to the high resolution and detection limit, it is also possible to carry out integral ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
For quick detection and quantification of small SF6 leaks The cordless battery-operated LeakSpySF6 precisely measures SF6 concentrations in air by means of a non-dispersive infrared sensor (NDIR sensor) and indicates the value on a graphic display in ppmv. The device allows precise localisation of leaks by searching the highest SF6 concentration. Thanks to the high accuracy and the low detection ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The IsoAir® 310P Air Particle Sensor makes it easy to monitor air in remote locations or in areas with process restraints. Real-time particle monitoring gives quick notification of particle anomalies, detecting 0.5 and 5.0 µm for GMP and FDA compliance. A central vacuum is not needed to operate the particle sensor, and it features a built in “low noise” blower together with ...
-
PremiumManufactured by ENVEAbased in FRANCE
Dusty is a filter monitor that works on a triboelectric ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Industrial control systems assure data integrity, process automation, simplicity of use, and data integration. The FacilityPro® Processor provides a central hub for an environmental monitoring system. The Processor communicates with cleanroom sensors, including particle and microbial monitors, while buffering data and checking tolerances for alarm activation. As a key component of industrial ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati ePNC is a compact particle number sensor specifically designed for PTI measurements. The ePNC gives reliable data of particle number concentration and it has several integration options for implementation into customer specific systems. The sensor has a modular design with separate control and metrological units. The control unit takes care of the control systems and data communications, ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
As part of a facility monitoring solution, the Airnet® II and IIs Particle Sensors from Particle Measuring Systems are an EU GMP Annex 1 solution that meets the specifications of ISO 21501-4 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing particles. A simple and cost-effective way to monitor your cleanroom, the Airnet II Air Particle ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The SLS Syringe Sampling System is ideal for applications where precise, small-volume sampling is needed. The system consists of a syringe sampler for either corrosive or non-corrosive liquids, a particle counter for different sizing sensitivities, and software. A convenient naming system identifies the particle counter installed inside the instrument. ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Sensitivity range: 0.3 - 25.0 µm; 1.0 CFM (28.3 LPM) - Built-in pump, choose wireless, analog & digital I/O. Particle Measuring Systems (PMS) is proud to introduce the IsoAir Pro-Plus remote particle counter. This next-generation in Contamination Control Strategy is a fixed environmental monitoring instrument that uses the latest technologies to simplify cleanroom monitoring into a ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The PMS Environmental Control Cabinet for the Ultra DI 20 and Chem 20 particle sensors is designed to produce the highest-precision particle data at 20 nm, for the cleanest ultrapure water and process chemical systems in the world. The special environmental control design enables temperature control to the required level of 22 - 28 °C + 1 °C/hour. For measuring particles as small as 20 ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
A compact, VHP resistant remote particle counter. As part of a facility monitoring solution, the IsoAir® Pro-E Remote Particle Counter from Particle Measuring Systems (PMS) is an effective piece of a Contamination Control Strategy using the latest technologies to streamline cleanroom monitoring while meeting global regulations including EU GMP Annex 1, ISO 14644-2, and part of a 21CFR Part 11 ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
The Aanderaa Turbidity Sensors detects infra-red light scattered by particles suspended in water. The Aanderaa Turbidity Sensor is based on the Seapoint Turbidity Meter. The sensor detects light scattered by particles suspended in water. This measurement is known to have a good correlation to the amount of suspended matter in water and can be used to monitor e.g. sediment, algae or particle ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati DePS (Dekati electrical Particle Sensor) is a miniature sensor for real-time particulate matter measurements. The Dekati DePS allows direct monitoring of particle LDSA concentration, and the measurement signal can be easily correlated to particle number or mass concentrations. The DePS™-OEM sensor consists of the particle detection and electronic control units and can be ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati ePNC is an innovative particle counter sensor designed specifically for easy integration in Periodic Testing and Inspection (PTI) devices. This PN counter fills all requirements of the upcoming NPTI regulation for a particle number ...
-
Manufactured by Kanomax USA, Inc.based in USA
2-channel remote particle sensors for facility monitoring applications. Kanomax particle sensors with analog output are designed to fit into your existing monitoring system, or they can be used as a stand-alone unit to monitor a critical area when connected to an alarm or controller. The Kanomax particle sensor is available with both 0.1 and 1.0 CFM flowrates and also comes in two different ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you