Particle Size Monitoring Equipment For Monitoring And Testing In Florida
-
ShowcaseManufactured by Enerpat Groupbased in CHINA
MSA-F Series Single Shaft Shredders are small to medium size reduction machines suitable for processing a wide range of materials to a uniform particle size. The products can often be sold as is, or be sent for further processing through additional equipment. Throughputs typically range between300kg/hr –5,000kg/hr+ depending on the model, material type and ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The ET 301 is a dust monitor using well-proven technology providing accurate and rapid results. Being adaptable it can be used on duct sizes from 250mm to 5m making the ET 301 a suitable sensor for a wide range of applications where a dust measurement is required. ET 301 continuous dust monitor uses the well-proven sensor technology to directly measure mass particulate concentration by sensing ...
-
PremiumManufactured by Advanced Cyclone Systems, S. A. (ACS)based in PORTUGAL
Cyclones have been mostly designed and improved by empirical means. Computerized Flow Dynamics (CFD) can be used for partial cyclone optimization but it is still incomplete for full cyclone optimization. The fact that particle agglomeration for cyclone modelling has been disregarded until present days is one of the reasons for notably low collection efficiency results. This knowledge has helped ...
-
PremiumManufactured by Genesis Water Technologies, Inc.based in USA
GWT NatZeo treatment media is a low-density, natural and environmentally friendly media typically used in gravity or pressure filters for both drinking water filtration, process water and wastewater reclamation applications. This media provides higher filtration performance, reducing sediment levels to around the 5 micron filtration range. This water treatment media provides significantly ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Woven wire cloth is widely used for filtration and is available in a wide range of materials and mesh sizes. It can be woven from any material which is ductile enough to be drawn into a wire form. Preferred materials are phosphor bronze, stainless steel and monel (nickel alloy). Other materials widely used include aluminium alloys, copper plain mild steel or coated mild ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Water-cooled heat exchanger. Cooling in continuous operation. Circulation pump for water cooling: 30 m³/min. Gas purification via particle filter (pore size 1 µm). Cooling capacity: ~ 45 kW. Operation via touch panel. Optional oilfree compressor 11.4 m³/h with 30 l dry filter for gas ...
-
PremiumManufactured by Enerpat Groupbased in CHINA
This sawdust production machine is very specially producing the sawdust from woodlog to sawdust just in one step without hammer mill and grinder process only just one chop-mill. Chop mill producing particle size is 2-4mm or client demanding size maximum 10mm. Lots of European wood pellet producer is changing and using the there wood pellet process instead of hammer mill process. It's simple and ...
-
PremiumManufactured by Enerpat Groupbased in CHINA
four shaft shredders, or name it quad shredders, are perfectly suitable for scrap size reduction applications such as e-waste, rubber tire recycling, RDF production, and contaminated materials where uniformed medium particle size is desired. The four shaft shredders are very robust and built to sustain tough operating conditions without ...
-
PremiumManufactured by Enerpat Groupbased in CHINA
four shaft shredders, or name it quad shredders, are perfectly suitable for scrap size reduction applications such as e-waste, rubber tire recycling, RDF production, and contaminated materials where uniformed medium particle size is desired. The four shaft shredders are very robust and built to sustain tough operating conditions without problem. ENERPAT four shaft shredders are available in ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
LENNSORB 101 is a high performance adsorbent based on granular ferric hydroxide. Made in a patented manufacturing process, it was special developed for selective removal of heavy metals and other toxic elements from water. Recognized for its high quality, LENNSORB 101 adsorbent complies with all requirements of DIN ...
-
PremiumManufactured by Advanced Cyclone Systems, S. A. (ACS)based in PORTUGAL
Recent adoption of electrostatic recirculation in the same cyclone system has successfully proven to further reduce particle emissions, even in the [1;5]μm particle size range, assuring future regulation compliance, particularly where legal limits are very ...
-
PremiumManufactured by Genesis Water Technologies, Inc.based in USA
Efficient. Affordable. Effective. GWT's Self Cleaning Centrifugal Filtration Systems. Reduce operating costs while increasing downstream treatment systems. Operating expenses tend to rise when chemical consumption costs rise, which is often due to high suspended solids concentrations in wastewater streams. Reduce chemical consumption while empowering your downstream treatment systems to operate ...
-
PremiumManufactured by Genesis Water Technologies, Inc.based in USA
Our Coconut Shell Activated carbon media is available in granular form in the following mesh sizes, 8×30 mesh, 12×40 mesh, and 20×50 mesh for liquid water purification. Our coconut shell activated carbon media is used in both commercial/industrial process water, to remove trace hydrocarbons, volatile organic compounds, low weight organics such as BTEX, color, and pesticides. It ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
LENNSORB 102 is a high-performance adsorbent based on granular ferric hydroxide. Made in a patented manufacturing process, it was specially developed for selective removal of arsenic from water. Recognized for its high quality and purity, LENNSORB 102 adsorbent complies with all requirements of DIN EN 15029 for drinking water treatment. In addition it is certified in accordance with NSF/ANSI ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Microbore version of the Metrosep A Supp 16 - 150 is well-suited to medium-capacity separation problems. Eluent consumption is drastically reduced as a result of the smaller inner diameter of this column type and the correspondingly lower flows. As a result of the lower flows, the dwell time of the anions in the detector, and thus also the peak areas with identical sample quantities, are ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrosep A Supp 5 - 250/2.0 is the microbore high-performance separation column with which even complex separation problems can be solved easily and reproducibly. The range of applications possible with this column far exceeds the detection of standard anions. The Metrosep A Supp 5 - 250/2.0 is used wherever maximum separating efficiency must be combined with both the lowest of detection ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrosep A Supp 4 - 250/4.0 is an extremely robust column with very good separation properties. The separation phase is comprised of polyvinyl alcohol particles with quaternary ammonium groups and a diameter of 9 µm. This structure guarantees great stability and a greater tolerance to very small particles that could pass through the integrated filter pad. The Metrosep A Supp 4 - ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrosep A Supp 17 - 150/4.0 separation column is the column of choice for anion determinations that require good separating efficiency and short separation times at room temperature. The maximum flow rate of 1.4 mL/min then also makes it possible to optimize the determination. The Metrosep A-Supp-17 columns convince with their good price-performance ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrosep A Supp 1 - 250/4.6 is a universal anion column that is characterized by medium capacity and special selectivity. With this column it is possible to process samples with great differences in concentrations. For example, 4 µg/L of sulfate can be determined in a solution containing 150 g/L sodium chloride. An additional advantage is that bromide does not elute until after the ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Combining IC with an electrospray ionization mass spectrometer (ESI-MS) or an inductively coupled plasma mass spectrometer (ICP-MS) solves even complex separation problems while achieving outstanding sensitivities and selectivities. These so-called hyphenated techniques provide valuable information for unambiguous peak identification and are less prone to matrix influences than IC with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you