Particulate Matter (PM) Monitoring Equipment For Monitoring And Testing Near East Timor
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments SB-47 is a heated filter oven that uses a 47 mm glass fiber filter and is specifically designed for isokinetic sampling of low particulate matter (PM) concentrations from stationary sources, such as gas turbines. ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
High-sensitivity, forward-scatter laser measurement for particulate matter, for use in combustion processes where condensed water is not present (for sale in the USA and China only). 4650-PM provides the stable, accurate low-range measurement of particulate matter in stacks and ducts where water droplets are not present in the flue gas. NOTE: The 4650-PM is currently available only in the USA and ...
-
Manufactured by Comde-Derenda GmbHbased in GERMANY
The PNS T-DM combines a low / medium volume sampler (LVS or MVS) and a filter changer in a stainless steel cabinet. It collects fine particulate matter on sampling filters according to EN 12341:2014 (PM10 and PM2.5). For this purpose, a vacuum pump draws in ambient air, and the system fractionates the airborne particles in a sampling inlet. The air containing the desired fine particulate fraction ...
-
Manufactured by Comde-Derenda GmbHbased in GERMANY
The low and medium volume samplers LVS and MVS collect fine particulate matter on sampling filters according to EN 12341:2014 (PM10 and PM2.5). For this purpose, a vacuum pump draws in ambient air, and the sampler fractionates the airborne fine particles in a sampling inlet. The air containing the desired fine particulate fraction then passes through the filter, where the particles are collected ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eFilter is a unique instrument that combines a standard gravimetric filter holder and sensitive real-time PM detection in one compact instrument. The Dekati eFilter assembly includes a standard gravimetric filter holder that is used to determine gravimetric mass of particles in the ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot PM is a robust particulate matter Monitor that can measure PM levels in the air. This PM detector uses laser scattering technology to measure PM1, PM2.5, PM10, and PM100 concentrations in the air. The industrial PM monitor is equipped with an optical particulate matter sensor. This sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
Manufactured by Senko Co., Ltd.based in SOUTH KOREA
Dust sensor detects dust particle concentration in air by using optical sensing method. An Laser diode(LD) and a photo diode are optically arranged in the device. The dust sensor can detect house dust, cigarette, etc. and designed as a sensor for automatic running of application like air purifier and air conditioner with air purifier ...
-
Manufactured by Teledyne APIbased in USA
The Model T640 PM Mass Monitor is the next breakthrough in ambient particulate monitors. The T640 delivers 1-min or better time resolution with exceptional sensitivity and precision. The instrument is very low maintenance and requires no sample media for minimal cost of ...
-
Manufactured by ION Science Ltd.based in UNITED KINGDOM
Environmental monitoring & smart city sensing technology. NextPM has been designed to meet the very highest performance standards in all applications. Featuring advanced technical specifications that enable ultra-precise measurements to be obtained, even in extreme climatic ...
-
Manufactured by Comde-Derenda GmbHbased in GERMANY
The method applied by the APM-2 uses the light scattered by tiny particles (nephelometry) to determine the PM10 or PM2.5 concentration in the ambient air directly and continuously. After performing a qualification test, TÜV Rheinland certified the procedure as equivalent to the customary gravimetric method. The system features an impactor inlet for fractionating the particulate matter, and a ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati DePS (Dekati electrical Particle Sensor) is a miniature sensor for real-time particulate matter measurements. The Dekati DePS allows direct monitoring of particle LDSA concentration, and the measurement signal can be easily correlated to particle number or mass concentrations. The DePS™-OEM sensor consists of the particle detection and electronic control units and can be ...
-
Manufactured by Comde-Derenda GmbHbased in GERMANY
Automatic weighing system for the gravimetric assessment of SPM filters; The automatic weighing system AWS-1 weighs up to 320 suspended particulate matter (SPM) filters (diameter 47 mm) in an automated process according to EN 12341:2014 (PM10 and PM2.5). The weighing results are recorded in a database along with relevant ancillary data, such as temperature and relative humidity. Automation ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The Dustroid Smart is an air particulate monitoring device specially developed to monitor ambient dust particles. The Dustroid Smart is a compact and connected optical particle counter which offers near real-time particulate matter count. The easy to install and the requirement for minimal space for deployment make it a scalable solution to create a dense network of data points. The Smart version ...
-
Manufactured by Esco Pharmabased in SINGAPORE
Esco Air Showers (EAS) are self-contained chambers installed strategically at entrances to cleanrooms and other controlled environments. They minimize particulate matter entering or exiting the clean space to mitigate the risk for cross-contamination. Personnel and materials entering or exiting the controlled environment are “scrubbed” with ULPA-filtered air by high-velocity air jets ...
-
Manufactured by Esco Lifesciences Groupbased in SINGAPORE
Esco Air Showers (EAS) are self-contained chambers installed strategically at entrances to cleanrooms and other controlled environments. They minimize particulate matter entering or exiting the clean space to mitigate the risk for cross-contamination. Personnel and materials entering or exiting the controlled environment are “scrubbed” with H14-filtered air by high-velocity air jets ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's Mikron MCL640 offers unparalleled accuracy for demanding industrial and manufacturing applications. This product is designed with advanced, maintenance-free electronics and industrial protective packaging. Designed to operate in harsh environments. High resolution 640 x 480 pixel thermal imager for process control and monitoring. Serves broad range of process control ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's FlareSpection system provides pilot flame monitoring for applications with multiple flare tips. You can confirm flare operation remotely and detect differences in flare stack heat signatures. Continuous, remote, and automatic monitoring of pilot flames and flared gases. High resolution 640 x 480 pixel thermal imager, providing unmatched spatial resolution. Superior image ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
The Exactus BAM is a real-time beta gauge built to satisfy users, regulators and those from the health community by providing truly accurate, precise, real time measurement of fine particulate matter automatically, it is a permanent installation with the capacity to be portable when ...
-
Manufactured by Aer Sampling Inc.based in USA
For use when in-stack filtering is desirable. Filters NOT ...
-
Manufactured by 2B Technologiesbased in USA
The Black Carbon Photometer (BCP) is a rugged, portable, highly accurate and economical instrument for measuring atmospheric black carbon particulates in polluted urban environments. The BCP uses the simple and direct technique of long-path photometry to quantify—in real time—the total extinction and mass concentrations of particulates in the aerosol (gas + particle) phase. This ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you