Particulate Monitoring Equipment For Monitoring And Testing Available In Vanuatu
-
ShowcaseManufactured by Access Sensor Technologies LLCbased in USA
Our flagship wearable sampler. Collect filter-based air samples on to 37 mm filter media along with extensive sensor data to inform you on motion, compliance, environmental factors, particulate matter, carbon dioxide and tVOC and NOx. Access Sensor Technologies’ UPAS is a compact, filter sampler built around ultrasonic pumping technology. The UPAS is smaller, lighter, quieter, ...
-
ShowcaseManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Parallel measuring of up to 4 particle fraction with only one instrument. With the dust analyser EasyPM dust fractions for PM10, PM2.5, PM1 and TSP can be measured parallel with only one ...
-
ShowcaseManufactured by Environmental Products & Applications, Inc.based in USA
With over 27 years in the industry, our certified experts know exactly how to eliminate dust on your site. Over the years, we have developed dust control polymers that work effectively & deliver clients maximum value on their investment. Envirotac dust control polymers reduce fugitive dust emission effectively and are ideal for road construction, airfields, helipads in remote sites & ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Ultra DI 20 Plus liquid particle counter from Particle Measuring Systems (PMS) provides groundbreaking capabilities for monitoring of the most demanding ultrapure water systems. Counting and sizing contaminants as small as 20 nm in combination with real-time statistical analysis enables efficient characterization of filtration systems and optimum process control. The thermal stabilization ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Sensitivity range: 0.1 - 1.0 μm. The High Sensitivity Liquid in Situ (HSLIS-M100e) Chemical Particle Counter provides continuous, real-time particle monitoring of contamination levels in corrosive liquids, including hydrogen fluoride (HF), and is included in Particle Measuring Systems’ (PMS®) complete line of liquid particle counters. Particle Measuring Systems’ HSLIS Liquid ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Airnet II is ideal for remote continuous particle monitoring as a component of a Facility Monitoring System. It meets the specifications of ISO 21501-4 and EU GMP Annex 1 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing particles. The Airnet II Particle Sensor provides unparalleled performance with data transmission capabilities for ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Advanced Aerosol Manifold for sequentially monitoring aerosol contamination at multiple cleanroom locations with a fixed airborne particle counter. The AM II Aerosol Manifold from Particle Measuring Systems offers advanced features for sequentially monitoring contamination at multiple cleanroom locations with a fixed airborne particle counter. The AM II aerosol manifold is ideal for trend ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD II reduces the pressure of dry, inert, non-toxic, non-flammable gases, such as Clean Dry Air (CDA), nitrogen, carbon dioxide and argon to a level acceptable for the Lasair II 110 and Lasair III 110 aerosol particle counters, which are designed to operate at atmospheric ...
-
PremiumManufactured by Testo, Inc.based in USA
The number of solid fuel burning systems, and the fine particles they emit, has continued to soar over the past years. This, and the amendment of 1. BlmSchV, has presented chimney sweeps, heating engineers, and service technicians with a new and formidable challenge. The testo 380 fine particle analyzer is designed to aid these professionals in performing easy and precise fine particle ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PTFE-coated glass fiber filters are constructed from borosilicate microfibers and bonded with PTFE. The filters can be folded and handled without loss of fibers. Specifically recommended for Method 26, PM10, and PM2.5 sampling. Great for especially low loading rates and low absorption of acid gases such as SOx or NOx with at least 99.95% retention efficiency (0.3 μm DOP). ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Microcomputer controlled gas collector for the automated dust sampling on membrane filters with a diameter of 47 mm or 50 mm in acc. with EN 12341. Automatic switching to sequentially admit up to 16 ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The High Volume PM 2.5 ambient air sampling inlet & retrofit kits are designed to provide existing owners of HI-Q Series High Volume PM-10 sampling systems with the option of retrofitting them into High Volume PM-2.5 Samplers, instead of needing to procure a new, complete, PM-2.5 high volume air sampler. An adapter is placed into the standard PM-10 sample inlet in place of the existing PM-10 ...
-
PremiumManufactured by ENVEAbased in FRANCE
The STACKFLOW 200 uses the wellestablished Averaging Pitot sensor technology to provide continuous emission monitoring of Flow, Temperature and Pressure. Utilised as a standalone sensor or in combination with Environnement S.A & PCME analyzers and controllers for the monitoring of particulates, gases and flue gas as part of a larger monitoring ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The GasLab Plus CM-505 is a Multi-Gas Detector designed to measure carbon dioxide (CO2), carbon monoxide (CO) Oxygen (O2), relative humidity and temperature in a variety of applications. With long-term data storage, the user can measure ambient gas levels by data displayed and gain indication by visual and audible alarm settings. ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A high-specification opacity and dust monitor meeting global compliance standards for monitoring combustion processes. 4500 MkIII is the most accurate and reliable continuous opacity monitor available, combining AMETEK Land’s ground-breaking innovation and simple design for precise, problem-free operation. Unmatched, class-leading accuracy ensures compliance limits for dust emissions and ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The DF-HKUPG-BL series upgrade kits are designed to upgrade existing analog high volume brushless air sampling stations currently utilizing chart recorders and electromechanical timers. The DF-HKUPG-BL up-grade kit eliminates the need to purchase an entirely new air sampling ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PM10 is used for Method 201A testing and is designed for in-stack measurement of particulate matter equal to or less than 10 microns. The shank has a 5/8-inch outer diameter for easy adaptation to an in-stack 47-mm filter assembly or probe. The PM10 cyclone kit includes cyclone assembly, PM10 nozzle set, 47-mm filter assembly, and a carrying case. Kits are available in stainless steel or alloy ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Apex Instruments stocks a variety of fiber thimbles for in-stack particulate sampling. The thimbles are seamless, high purity filters, and available in two different fiber types: borosilicate glass and quartz. Borosilicate glass fiber thimbles are acid-washed to reduce the trace metal content to an absolute minimum. The quartz fiber thimbles are strengthened with alumina and are pre-fired at ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Purpose-built nano condensation particle counter CPC designed for use in the most critical fab spaces. The NanoAir™ 10 Condensation Particle Counter (CPC) is a revolutionary new product from Particle Measuring Systems (PMS). It provides the sensitivity of a CPC with the ease of use and functionality of a traditional cleanroom particle counter. Designed to monitor ultra-clean environments, ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati PM10 Impactor is a three-stage cascade impactor for determining particle gravimetric mass size distribution. The operating principle of the Dekati PM10 impactor is based on inertial size classification and gravimetric or chemical analysis of the collected, size classified particle samples. This impactor has cutpoints of 10, 2.5 and 1 μm making it an ideal choice for PM10, PM2.5 and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you