Showing results for: Aerosol Particle (Particulate Monitoring) Equipment Available In Kazakhstan
-
Manufactured by Acoem Australasiabased in AUSTRALIA
The Aurora 2000 PM Correlating Nephelometer is part of the ‘new generation’ nephelometers using a single wavelength and an BETA monitor to measure aerosol light scattering and derive particulate concentrations. The Aurora 2000 enables the calculation of a correlation factor based on a PM2.5 reference method which is then used to ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
Easy to use and maintain, the Aurora 1000 lowers the cost of ownership for aerosol light scattering, visibility and particulate monitoring instrumentation. The Aurora 1000 uses a single wavelength LED for light scattering coefficient and visibility measurements. Ecotech, through collaboration with globally renowned atmospheric research ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Purpose-built nano condensation particle counter CPC designed for use in the most critical fab spaces. The NanoAir™ 10 Condensation Particle Counter (CPC) is a revolutionary new product from Particle Measuring Systems (PMS). It provides the sensitivity of a CPC with the ease of use and functionality of a traditional cleanroom ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The IsoAir® 310P Air Particle Sensor makes it easy to monitor air in remote locations or in areas with process restraints. Real-time particle monitoring gives quick notification of particle anomalies, detecting 0.5 and 5.0 µm for GMP and FDA compliance. A central vacuum is not needed to operate the particle sensor, and ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The ParticleSeeker is a 10-port smart manifold companion to the NanoAir™ aerosol nanoparticle counter. The ParticleSeeker is a 10-port smart manifold companion to the NanoAir 10 aerosol nanoparticle counter. Designed specifically for use in the most critical fab spaces, it is available for use in applications that require multiple ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD II reduces the pressure of dry, inert, non-toxic, non-flammable gases, such as Clean Dry Air (CDA), nitrogen, carbon dioxide and argon to a level acceptable for the Lasair II 110 and Lasair III 110 aerosol particle counters, which are designed to operate at atmospheric ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Advanced Aerosol Manifold for sequentially monitoring aerosol contamination at multiple cleanroom locations with a fixed airborne particle counter. The AM II Aerosol Manifold from Particle Measuring Systems offers advanced features for sequentially monitoring contamination at multiple cleanroom locations with a ...
-
Manufactured by Research International, Inc.based in USA
TacBio was developed by the U.S. government for military, homeland security, and public health applications. It is a compact and rugged portable biological particle detector that uses both diffractive scattering and natural biological fluorescence to monitor aerosol particulates and classify them as being of either biological or ...
-
Manufactured by In-Tox Products, LLCbased in USA
The In-Tox Products Cyclone Train is used to determine the particle-size distribution in process streams and to bypass the limitation of Impactors. Cyclone Samplers are advantageous for collecting large samples and in sampling aerosols of high particulate concentration. Cyclones are available in Brass or Stainless Steel and ...
-
Manufactured by NuAire, Inc.based in USA
The FumeGard 162 Conventional Corrosive-Resistant Polypropylene Fume Hood is designed to capture, contain, and exhaust fumes, gases, vapors, mists, aerosols, and particulate matter generated within the hood ...
-
Manufactured by DustCanary Ltdbased in UNITED KINGDOM
Wearable, compact, light-weight sampler for Workplace Exposure Limit (WEL) assessment. The DustCanary Compact Personal Aerosol Sampler (CPAS) is designed to assess inhalable dust exposure in the workplace over an 8-hour shift. The sampler is convenient to use and sufficiently rugged for sampling personal exposure to particulate and ...
-
Manufactured by Environmental Devices Corporation (EDC)based in USA
Air-Aide Model AA-3500 Airborne Particulate Monitor provides accurate and instantaneous display of concentration readings on lung damaging particulates and aerosols. AA-3500 is a portable handheld survey tool for measuring lung damaging particulate matter. The unique sensor design has applications in indoor air quality (IAQ), HVAC, ...
-
Manufactured by 2B Technologiesbased in USA
of particulates in the aerosol (gas + particle) phase. This direct approach avoids the artifacts and other issues associated with current commercially available instruments, such as the most common current technique of aethalometry that uses filters to preconcentrate samples for ...
-
Manufactured by In-Tox Products, LLCbased in USA
complicated computer programs. It also means that the particles collected on one stage can be re-suspended and used as an aerosol with known size ...
-
Manufactured by TSI Incorporatedbased in USA
Aerosol Diluter 3302A reduces particle concentrations of high-concentration aerosols, providing a representative sample that meets the input requirements of the Aerodynamic Particle Sizer® (APS) spectrometer. This APS accessory achieves dilution ratios of 100 to 1 and 20 to 1 using easy-to-change capillary tubes. Two diluters ...
-
Manufactured by Airmodus Oybased in FINLAND
Airmodus Condensation Particle Counters (CPC) are designed to count individual aerosol particles accurately from very low concentrations to high concentrations. The European Committee for Standardization (CEN) set the Technical Specification CEN/TS 16976:2016 for harmonizing the measurement of ultrafine particles in the ...
-
Manufactured by Westech Scientific Instruments (Westech)based in UNITED KINGDOM
The Westech 7 (W7) is Westech’s version of the Next Generation Impactor (NGI), a Seven Stage Cascade Impactor with Micro-Orifice Collector conforming to all the critical dimensions defined for USP Apparatus 5 & 6 and EP Apparatus E. The W7 is a multi-jet impactor with 8 removable collection cups and a convenient single tray design with operating flowrates between 15 and 100 ...
-
Manufactured by TSI Incorporatedbased in USA
Our Aerosol Diluter reduces particle concentrations of high-concentration aerosols, providing a representative sample that meets the input requirements of the Aerodynamic Particle Sizer® (APS™) spectrometer. This APS accessory achieves dilution ratios of 100 to 1 and 20 to 1 using easy-to-change capillary tubes. Two diluters in a ...
-
Manufactured by Airmodus Oybased in FINLAND
Study and monitor particles smaller than the detection threshold of any CPC. Airmodus Particle Size Magnifier A10 grows nano sized aerosol particles into sizes that can be detected with a standard CPC. Particles as small as 1 nm can be ...
-
Manufactured by Palas GmbHbased in GERMANY
High resolution aerosol spectrometer for particle size measurement from 145 nm to 100 µm with latest LED ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you