Cascade Impactor (Particulate Monitoring) Equipment
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati PM10 Impactor is a three-stage cascade impactor for determining particle gravimetric mass size distribution. The operating principle of the Dekati PM10 impactor is based on inertial size classification and gravimetric or chemical analysis of the collected, size classified particle samples. This ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The DLPI+ (Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The HT-DLPI+ (High Temperature Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
Manufactured by InPharmaTEC, a TCR Tecora divisionbased in ITALY
A sampling device can be used as a substitute for the respiratory tract as a collector of airborne particles, and as such, it shall reproduce to a reasonable degree the lung penetration by these particles. ACI Cascade Impactor 8 Stage for the efficient collection of airborne particles. ...
-
Manufactured by TSI Incorporatedbased in USA
MOUDI-II and NanoMOUDI-II impactors are second generation Micro-Orifice, Uniform-Deposit Impactors from MSP. These impactors are noted for their superior aerodynamic design, sharp cut-size, and low particle loss characteristics. Up to 6000 precision micro-orifice nozzles are used to reduce pressure drop, jet velocity, particle bounce, and ...
-
Manufactured by Tisch Environmental Incbased in USA
Our Personal Cascade Impactor is a precision cascade impactor worn by personnel to provide complete and accurate aerodynamic particle size distributions of the particulate in their environment. A personal mounting bracket is provided to attach to the subject’s lapel or pocket. It is compact, light-weight (7 oz. Max.) and ...
-
Manufactured by InPharmaTEC, a TCR Tecora divisionbased in ITALY
Particles must be separated from the air and “physically” captured onto a suitable impaction surface (particle collection efficiency). A sampling device can be used as a substitute for the respiratory tract as a collector of viable airborne particles. The 6 Stage Multistage Viable Impactor with 400 small round jets. ...
-
Manufactured by SKC Asia HSE Sampling Technologies Pte Ltdbased in SINGAPORE
The SKC BioStage viable cascade impactor meets NIOSH requirements and ACGIH recommendations for sampling indoor and outdoor mold and bacteria. The BioStage comprises an inlet cone, precision-drilled 400-hole impactor stage, and a base that holds a standard-size agar plate. A high flow pump, such as the QuickTake 30, pulls microorganisms in ...
-
Manufactured by InPharmaTEC, a TCR Tecora divisionbased in ITALY
Andersen Cascade Impactor 2 stages is one of the confgurations of Andersen Cascade Impactor 6 stages Viable. It is used when size distribution is not required and only respirable and non-respirable segregation/fractions and total counts are needed. The Two Stage Viable Impactor consists of two sampling stages. ...
-
Manufactured by In-Tox Products, LLCbased in USA
In-Tox Products' Impactors are precision engineered and their careful design provides a number of advantages to the user. The material collected on each stage contains particles having sizes ranging from the cutoff size of the previous stage to the cutoff of the collecting size. Therefore, the analysis of the impactor data may be done ...
-
Manufactured by California Measurements, Inc.based in USA
6-stage cascade impactor; covers particle size range of 16 to 0.5 microns; 12.6 lpm flow rate; 1.5 inch diameter glass slides as impaction plates; complete with detached vacuum pump assembly, flowmeter and flow-control metering valve. Accessories, such as, glass throat and other inlets, etc. are ...
-
Manufactured by Tisch Environmental Incbased in USA
The series TE-230 provides a simple, accurate, and yet low-cost means of obtaining the particle size distribution and respirable mass fraction of suspended particulates in outdoor and occupational environments. The unique slotted impactor design features the ultimate in precision, predictability, and sharpness of cut-off, combined with ...
-
Manufactured by TSI Incorporatedbased in USA
MOUDI impactors are classic, precise cascade impactors with sharp cut-size, low internal-loss characteristics, and high accuracy. These cascade impactors provide sharp cut-sizes, low internal losses, and high accuracy in a non-rotating configuration with a 30 L/min smapling flow rate. The MOUDI ...
-
Manufactured by Westech Scientific Instruments (Westech)based in UNITED KINGDOM
The 8-stage Andersen Cascade Impactor (ACI) is the most frequently used instrument for the testing of inhaler products within the Pharmaceutical Sector. Westech ACIs are specifically designed to meet the highest criteria laid down in the ...
-
Manufactured by Westech Scientific Instruments (Westech)based in UNITED KINGDOM
The 230 series provides a simple, accurate, and yet low-cost means of obtaining the particle size distribution and respirable mass fraction of suspended particulates in outdoor and occupational environments. The unique slotted impactor design features the ultimate in precision, predictability, and sharpness of cut-off, combined with ...
-
Manufactured by Westech Scientific Instruments (Westech)based in UNITED KINGDOM
The Six Stage Bioaerosol Sampler is a cost effective, multi-stage, multi-orifice cascade impactor that measures concentration and particle size distribution of aerosol-type bacteria and fungi in the ambient air. Based on the inertial impaction principle, the six stage viable impactor collects all particles, regardless of physical size, ...
-
Manufactured by Environmental Solutionsbased in INDIA
These cascade impactors are designed for sampling and collecting size-fractionated aerosol particle samples for gravimetric and or chemical analyses. That preferred by aerosol researchers worldwide for environmental and laboratory ...
-
Manufactured by Westech Scientific Instruments (Westech)based in UNITED KINGDOM
Westech 7 is the newest innovation in impactor sampling technology, suitable for dry powder inhaler testing, metered dose inhaler testing, nebulizer testing & nasal spray testing. The W7 is a Seven Stage Cascade Impactor with Micro-Orifice Collector conforming to all the critical dimensions defined for USP Apparatus 5 & 6 and EP ...
-
Manufactured by Tisch Environmental Incbased in USA
Eight Stage Ambient Sampler System Includes: 8 Aluminum Orifice Stages, 8 Stainless Steel Collection Plates, Back up 81mm Filter Holder. 11 Silicone O-Ring Gaskets, Vacuum Pump Assembly and Carrying Case ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Gravimetric Impactor (DGI) is a high sample flow rate cascade impactor for low concentration particle measurement applications. The DGI measures gravimetric particle mass size distribution of particles < 2.5 μm in five size fractions. Typical measurement applications of the DGI impactor include engine emission ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you