particulate sampling Equipment available in Tonga

Available in Tonga| Near Tonga
160 Results found

We couldn't find any particulate sampling equipment in Tonga

Here is a list of results available in Tonga

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Particulate Monitoring ×

  • Keyword: particulate sampling ×

  • Available in: Australasia ×

  • Available in: Tonga ×

Automatic Filter Changers

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

The Sierra Automatic Filter Changer allows the engineer to complete several tests in succession. Our automatic filter changer works seamlessly with the Model BG-3 to fully automate particulate collection to greatly improve testing efficiency and more importantly, testing safety. The system can hold up to 22 (dependent on filter size, 47mm, 70mm, ...

Westech - Model M9096 - Particulate Sampling Train

by Westech Scientific Instruments (Westech)     based in Upper Stondon, UNITED KINGDOM

The M9096 In-Stack Manual Method Particulate Sampler for ISO9096, EN13284-1, US EPA Method 17

HI-Q - Model PM-10 - Sampling Inlet

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Products Company's High Volume PM-10 Size Selective Inlet samples suspended particulate in the air at a flow rate of 40 CFM through its omnidirectional head. The air is then accelerated through multiple internal nozzles toward a greased collection plate. Due to their larger momentum, particles greater than 10 microns cannot ...

HI-Q - Model PM-2.5 - Sampling Inlet with Filter Holder

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Products Company's, EPA Designed, PM-2.5 Sample inlet operates on the same principles of particulate impaction as the PM10-INLET described above. Air is drawn into the omnidirectional inlet head at a flow rate of 16.67 LPM. The air is then accelerated toward the first impaction stage where particulate with aerodynamic diameters ...

HI-Q - Kinetic Impactor Inlets

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Products Company's AK-Series adjustable Annular Kinetic Impactor Heads are designed for collecting alpha, beta, & gamma-emitting contaminants, plutonium fission, Radon decay products and size specific dust particles. By adjusting the stopping distance (nozzle to impactor plate distance) and varying the particle velocities an ...

TAPI - Model 651 - Ultrafine Particle Monitor

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

Ultrafine particle (those less than 100nm, or 0.1µm in size) are produced through combustion activities and are persistent in all ambient air. Concentrations of these tiny particle can be very high near emissions sources (for example, near busy roads), and both acute and chronic exposure are believed to lead to health problems. As part of ...

TAPI - Model T640 - PM Mass Monitor

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

Teledyne API announces the next breakthrough in ambient particulate air monitoring, the Model T640 PM Mass Monitor. Delivering continuous, real-time PM10, PM2.5, and PM10-2.5 mass measurements using innovative broadband spectroscopy, the instrument has fast response, exceptional precision and sensitivity. The instrument uses very little power and ...

TAPI - Model 602 BetaPLUS - Particle Measurement System

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model 602 BetaPLUS Particle Measurement System is the first to receive US EPA Federal Equivalent Method (FEM) designations for all three PM parameters in a single instrument.

Protea - Filters

by Protea Limited     based in Middlewich, UNITED KINGDOM

Filtering of gas for particulate matter is of great importance to ensure high uptime for gas analysers and sample pumps. With Protea’s experience of process and emissions monitoring of many different applications, we can recommend the best choice of filter material and porosity. With our advanced FTIR gas analysers we are able to source and ...

HI-Q - Stack Sampling System Design

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q is ready to help with your stack sampling requirements: State and Federal nuclear regulatory agencies require a stack discharge sampling program as part of the licensing process. Radionuclides discharged to the air in the form of particulate and volatile compounds must be assayed. Therefore, nuclear facilities are required to follow standard ...

Environnement S.A. - Model BETA 5M - Continuous Stack Particulate Monitor by Beta Ray Attenuation

by Environnement S.A     based in Poissy, FRANCE

Continuous stack particulate monitor by Beta ray attenuation. Exists in two versions : BETA 5M: for Dry process particulate monitoring. BETA 5M/H: for Wet process dust measurements.

Saphymo - Model PM100 - Particulate Monitor

by Saphymo     based in Montigny Le Bretonneux, FRANCE

The PM100 particulate monitor is used for continuous measurement of α and β particulate volumetric activity in all gaseous effluents. The sample is pulled by means of a pumping unit from the flow of an exhaust stack, a ventilation duct or the static atmosphere of a working zone and then transferred to a detection assembly. A dynamic ...

Opsis - Model SM200 - Particulate Monitor

by Opsis AB     based in Furulund, SWEDEN

OPSIS SM200 particulate monitor offers automatic dust monitoring and filter sampling of TSP, PM10 and PM2.5. The SM200 can be remote controlled and is easily integrated in modern monitoring stations. Thanks to the extensive automatic QA/QC procedures, the dust monitor renders high accuracy and precision. It can be fitted with a real time light ...

Cerex - Model SPP100 - Gas Sample Conditioner

by Cerex Monitoring Solutions, LLC.     based in Atlanta, GEORGIA (US) (USA)

ETG permeation sample conditioning systems are designed to prepare hot gas sample streams for high flow, high performance gas monitoring applications. The ETG permeation system will remove particulates, mists & water vapor from a gas stream without the loss of analyte gasses.

IC Control - Model 521 - 316 SS Industrial Process Sampler

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

We understand your need for a clean, representative, trouble-free sample for your on-line process monitors. Conventional filtering techniques accumulate dirt particles on the filter media until the media clogs and is replaced. The tangential filtration technique used in the model 521, however, passes virtually all of the particulate through the ...

Environnement S.A. - Model PM162M - Automatic Sequential Particulate Sampler (TSP / PM10 / PM2.5 / PM1)

by Environnement S.A     based in Poissy, FRANCE

Automatic Sequential Particulate Sampler (TSP / PM10 / PM2.5 / PM1). Complies with  EN 12341 standard Large autonomy.

Environnement S.A. - Model MP101M - Real Time Particulate Monitor

by Environnement S.A     based in Poissy, FRANCE

The standard Beta gauge measurement Method ISO 10473 of the MP101M dust monitor allows, when used with the patented optical technology of the CPM module, the continuous and simultaneous measurement of fine particulates. A unique combination, providing exclusive benefits: Precise beta attenuation monitoring of PM10, PM2.5, PM1 or TSP mass ...

Model PAIS200 - Particulate and Iodine Sampler

by Saphymo     based in Montigny Le Bretonneux, FRANCE

The PAIS 200 is designed to continuously collect Particulates  and Iodines contained in all gaseous effluents. A sample is extracted either in a static atmosphere of a work area, either in a flow of a stack  or a ventilation duct by means of an isokinetic sampling probe. The samples are to be analyzed  in the laboratory.

TA - Model FM-9MA-2 - Alpha & Beta Particulate Air Monitor

by Technical Associates     based in Canoga Park, CALIFORNIA (USA)

The FM-9-MA2 and FM-9-MAB2 Air Monitors utilize a solid state detector and two coordinated single channel analyzer windows. Utilizing two coordinated single channel analyzers the electronics will reject Radon pulses. The sample window (PHA allows the user to preset specific energy level for sample (eg. The “Radium A” peak), measuring ...

Ecotech - Model MicroVol 1100 - Low Volume Air Sampler

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The MicroVol 1100 low volume air sampler provides a flexible sampling platform for PM10, PM2.5 or TSP particulates and basic meteorological parameters.

Need help finding the right suppliers?

Let the XPRTs do the work for you