Particulate Monitoring Equipment For Monitoring And Testing In Bulgaria
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Monitor for AeRosols and Gases in Ambient air (MARGA) uses ion chromatography to monitor air quality by measuring the concentration of water-soluble gases and aerosols in air containing different sizes of particulate matter. Air is drawn in to the instrument by a vacuum pump at a constant flow rate. Before entering the instrument, the maximum size of particulate matter (PM) can be limited by ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Monitor for AeRosols and Gases in Ambient air (MARGA) uses ion chromatography to monitor air quality by measuring the concentration of water-soluble gases and aerosols in air containing different sizes of particulate matter. Air is drawn in to the instrument by a vacuum pump at a constant flow rate. Before entering the instrument, the maximum size of particulate matter (PM) can be limited by ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Ambient air quality is critical for our health and the environment. MARGA is a fully autonomous sampling and measurement system that continuously measures the water-soluble gas and aerosol components that have a direct effect on air quality. These results can then be used to study the formation of aerosols from their precursor gases and how their concentration and composition vary with ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 approved ProScatterTM particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas streams. Continuous Particulate Monitoring for saturated wet stack applications typically found after wet scrubbers, wet electrostatic precipitators and wet flue gas desulphurisation ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
The PM2.5 monitor version of OPSIS’ SM200 particulate monitor offers accurate and reliable automatic measurements of PM2.5 particulate fraction concentrations in ambient air, and sampling of the PM2.5 particulate fraction for later manual ...
-
PremiumManufactured by ENVEAbased in FRANCE
Suitable for industrial processes controlled with dry scrubbing and high efficiency bag filtration. The PCME QAL 991 uses unique ElectroDynamic™ Probe Electrification technology, which outperforms alternative probe electrification technologies by extracting a specific frequency band of the induced AC signal. This patented feature ensures confidence in accurate and representative data by ...
-
PremiumManufactured by ENVEAbased in FRANCE
The QAL 260 series is suitable for measuring dust concentrations in Combustion, Incineration and other industrial stacks and is compliant with EN 14181. Having a 0-15 mg/m³ certification range, the QAL 260 sensor can be used at low or high dust levels. Due to dynamic ranging, the sensor is also suitable for much higher dust levels found in Power, Cement and Metals smelting ...
-
PremiumManufactured by ENVEAbased in FRANCE
US EPA PS11 compliant ProScatter™ particulate CEM providing high quality emission measurement for low dust concentrations from industrial processes. Utilising the patented ProScatterTM Forward Scatter measurement technique for measuring particulate concentration levels, typically between 0.06 mg/m3 to 300 mg/m3, this measurement technique offers improved levels of performance which make the ...
-
PremiumManufactured by ENVEAbased in FRANCE
Stand alone Cross Stack optical dust monitor suitable for measuring emissions after electrostatic precipitators and stacks without filtration systems. Used for emissions measurement (mg/m³) after electrostatic precipitators and baghouses or Process control applications. Advanced sensor design includes automatic drift (zero and span) ...
-
PremiumManufactured by ENVEAbased in FRANCE
TÜV approved DynamicOpacity™ particulate monitor for emission measurement of dust from large dry industrial processes including Baghouses and Electrostatic ...
-
PremiumManufactured by ENVEAbased in FRANCE
The PCME DM 210 comprises a single compact sensor design with integrated user interface for reliable and robust particulate monitoring for all types of industrial processes. Additional functionality allows the instrument to measure defined units (mg/m³) with QA checks if required by the Process Operator or ...
-
PremiumManufactured by ENVEAbased in FRANCE
Designed to automatically sample particulates on filters using a TSP, PM10, PM2.5 or PM1 inlet. PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible physicochemical laboratory ...
-
Manufactured by InsightAir Europebased in BULGARIA
InsightAir’s cleanroom air quality sensor measures temperature, relative humidity, CO2, VOC, PM2.5, Particles (from 0,3 to 5 µm) and on demand – Differential Pressure. The sensor is connected through a local WiFi network or via GPRS (sim-card with monthly ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The APDA-371 automatically measures and records airborne particulate concentration levels (in milligrams or micrograms per cubic meter), using the industry-proven principle of beta ray attenuation. Thousands of this Dust Analyzer units are currently deployed worldwide, making the unit one of the most successful air monitoring platforms in the ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The new CAMSIZER XT provides particle size and shape distribution analysis needed for the quality control of fine powders and ...
-
Manufactured by InsightAir Europebased in BULGARIA
InsightAir’s indoor air quality sensor measures temperature, relative humidity, CO2, VOC and PM2.5. The sensor is connected through a local WIFI network or via GPRS (sim-card with monthly ...
-
Manufactured by Ecotech Engineering LTDbased in BULGARIA
Dantherm Filtration MJS filters offer pulse-jet cleaning and are available in the range of 1000 m3/h to 35,000 m3/h MJS Dantherm Filtration filter cartridge is adapted from the staple binding filter material suitable for lightly loaded processes, with the availability of dry, free-flying, fine powder. Dantherm Filtration MJS filters are characterized by purely internal profiles without ...
-
Manufactured by InsightAir Europebased in BULGARIA
InsightAir’s outdoor air quality sensor measures temperature, relative humidity, CO2, VOC, PM2.5, NO2 and O3. The sensor is connected through GPRS (sim-card with monthly ...
-
Manufactured by InsightAir Europebased in BULGARIA
InsightAir’s industrial air quality sensor measures temperature, relative humidity, CO2, VOC, PM2.5 including Suspended Particulate Matter (PM100). PM100 is related to the total inhalable fraction of particles (coarse dust) in the air, which is regulated by the authorities in European countries. The sensor is connected through a local WIFI network or via GPRS (sim-card with monthly ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
HORIBA's CAMSIZER Digital Image Processing Particle Size and Shape Analysis System provides rapid and precise particle size and particle shape distributions for dry powders and bulk material in the size range from 20 microns to 30 millimeters. This technique provides a wide variety of information about the sample, from a general size measurement, to shape parameters that can be closely correlated ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you