Particulate Sampler Equipment For Monitoring And Testing Available In Lithuania
-
PremiumManufactured by Access Sensor Technologies LLCbased in USA
A two liter per minute inlet allows you to push your PM2.5 limits of detection lower with a higher flow ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The High Volume PM 2.5 ambient air sampling inlet & retrofit kits are designed to provide existing owners of HI-Q Series High Volume PM-10 sampling systems with the option of retrofitting them into High Volume PM-2.5 Samplers, instead of needing to procure a new, complete, PM-2.5 high volume air sampler. An adapter is placed into the standard PM-10 sample inlet in place of the existing PM-10 ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Apex Instruments stocks a variety of fiber thimbles for in-stack particulate sampling. The thimbles are seamless, high purity filters, and available in two different fiber types: borosilicate glass and quartz. Borosilicate glass fiber thimbles are acid-washed to reduce the trace metal content to an absolute minimum. The quartz fiber thimbles are strengthened with alumina and are pre-fired at ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The HVP-5000AFC-Series high volume air samplers are housed in a clear-anodized aluminum outdoor shelter. The unit incorporates a maintenance free, 2 or 3 stage centrifugal blower powered by a brushless, variable speed maintenance-free motor. Blower selection is dependent upon individual sampling environment. The speed of the motor is controlled by a programmable logic controller (PLC) that ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q Environmental Products Company’s AK-Series adjustable Annular Kinetic Impactor Heads are designed for collecting alpha, beta, & gamma-emitting contaminants, plutonium fission, Radon decay products and size specific dust particles. By adjusting the stopping distance (nozzle to impactor plate distance) and varying the particle velocities an operator can collect size specific dust ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Apex Instruments stocks a variety of fiber thimbles for in-stack particulate sampling. The thimbles are seamless, high purity filters, and available in two different fiber types: borosilicate glass and quartz. Borosilicate glass fiber thimbles are acid-washed to reduce the trace metal content to an absolute minimum. The quartz fiber thimbles are strengthened with alumina and are pre-fired at ...
-
PremiumManufactured by Access Sensor Technologies LLCbased in USA
PM2.5 is monitored worldwide for ambient and personal exposure to harmful ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The DF-HKUPG-BL series upgrade kits are designed to upgrade existing analog high volume brushless air sampling stations currently utilizing chart recorders and electromechanical timers. The DF-HKUPG-BL up-grade kit eliminates the need to purchase an entirely new air sampling ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Apex Instruments stocks a variety of fiber thimbles for in-stack particulate sampling. The thimbles are seamless, high purity filters, and available in two different fiber types: borosilicate glass and quartz. Borosilicate glass fiber thimbles are acid-washed to reduce the trace metal content to an absolute minimum. The quartz fiber thimbles are strengthened with alumina and are pre-fired at ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The DF-HKUPG series upgrade kits are designed to upgrade existing analog high volume air sampling sta-tions currently utilizing chart recorders and electromechanical timers. The DF-HKUPG upgrade kit eliminates the need to purchase an entirely new air sampling ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The HVP-6000AFC-Series high volume air samplers are housed in a clear-anodized aluminum outdoor shelter. The unit incorporates a touch screen user interface with a maintenance-free, 2 or 3 stage centrifugal blower powered by a brushless, variable speed, maintenance-free motor. The speed of the motor is controlled by a programmable logic controller (PLC) that accepts a signal from a mass flow ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q Environmental Products Company’s High Volume PM-10 Size Selective Inlet samples suspended particulate in the air at a flow rate of 40 CFM through its omnidirectional head. The air is then accelerated through multiple internal nozzles toward a greased collection plate. Due to their larger momentum, particles greater than 10 microns cannot negotiate the air stream turn, thereby colliding ...
-
PremiumManufactured by ENVEAbased in FRANCE
Designed to automatically sample particulates on filters using a TSP, PM10, PM2.5 or PM1 inlet. PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible physicochemical laboratory ...
-
Manufactured by Comde-Derenda GmbHbased in GERMANY
The low and medium volume samplers LVS and MVS collect fine particulate matter on sampling filters according to EN 12341:2014 (PM10 and PM2.5). For this purpose, a vacuum pump draws in ambient air, and the sampler fractionates the airborne fine particles in a sampling inlet. The air containing the desired fine particulate fraction then passes through the filter, where the particles are collected ...
-
Manufactured by Qingdao Yingying Environmental Technology Co., Ltd.based in CHINA
This instrument is a multi-function instrument that takes into account the sampling of dust pollutants such as fluoride, heavy metals, TSP, PM10 and PM2.5 in ambient air. The flow rate of the sampling working point of the instrument covers 16.7L/min, 50.0L/min and 100.0L/min. When the flow rate is 50.0L/min and the flow rate is 100.0L/min, the load capacity can reach 20kPa, which can realize ...
-
Manufactured by ARA Instrumentsbased in USA
The Low Flow Research Sampler is a portable, rapidly deployable, battery-powered particulate sampling device. It utilizes FRM-style impactors for improved accuracy at 6 LPM and requires no grease or oil for low maintenance use. The compact-sized sampler can be configured to collect 24-hour TSP, PM10, or PM2.5 filter samples and can simultaneously measure and log all real-time sampling parameters, ...
-
Manufactured by Comde-Derenda GmbHbased in GERMANY
The PNS T-DM combines a low / medium volume sampler (LVS or MVS) and a filter changer in a stainless steel cabinet. It collects fine particulate matter on sampling filters according to EN 12341:2014 (PM10 and PM2.5). For this purpose, a vacuum pump draws in ambient air, and the system fractionates the airborne particles in a sampling inlet. The air containing the desired fine particulate fraction ...
-
Manufactured by AMS Analiticabased in ITALY
The new impactor models have been manufactured in full respect of features published in reference norms regarding impactor for PM2.5 dust particle fractionation, with the option of simple adaptor kits for interchanging between one sampler and another for extremely easy, versatile use. All sampling phase settings are programmable from electronic programming microprocessor and sampling can be set ...
-
Manufactured by AMS Analiticabased in ITALY
Easy to use, the Dustcheck DPM-1 PM sampler fit with all sampling needs. Based with a powerful aspirating diaphragm pump (the EPA version has built in a single head diaphragm pump) that allows the system to perform sampling in a constant flow option to compensate any pressure drop coming from overload samples. The new microprocessor capabilities allow the user to select and store in the memory up ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you